S80 牵引供电综合 标准查询与下载

ANSI/IEEE 1628:2009 运输系统用直流电（dc）高架接触系统维护推荐操作规程

This recommended practice provides overhead contact system maintenance practices and procedures including maintenance techniques, site inspection and test procedures, and maintenance tolerances, for heavy rail, light rail, and trolley bus systems.

Recommended Practice for Maintenance for dc Overhead Contact Systems for Transit Systems

IEC 62499:2008 轨道交通.集流系统.碳滑板用导电弓架试验方法

Railway applications - Current collection systems - Pantographs, testing methods for carbon contact strips

DIN EN 50317/A2 Berichtigung 1:2008 轨道交通.集流系统.测量导电仪和架空接触线之间动态互作用有效性的要求

Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line; German version EN 50317:2002/A2:2007, Corrigenda to DIN EN 50317/A2 (VDE 0115-503/

DIN EN 50317/A2:2008 轨道交通.集流系统.电杆和架空线间动态电子相互作用的测量的有校性及要求

Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line; German version EN 50317:2002/A2:2007

DIN EN 50163/A1:2008 轨道交通.牵引系统的供电电压

Railway applications - Supply voltages of traction systems; German version EN 50163:2004/A1:2007

NF F67-207-1:2007 轨道交通.安装在道上铁路车辆上的电力变流器.第1部分:特征和试验方法

Railway applications - Power convertors installed on board rolling stock - Part 1 : characteristics and test methods.

TB 10008-2006 铁路电力设计规范

本规范适用于铁路110kV及以下的电力工程设计。当铁路电力工程电压等级为110kV以上时,应按有关国家规范进行设计。本规范不适用于电力牵引供电工程设计。

Code for design of railway electric power

DIN EN 50405:2007 轨道交通.集流系统.碳滑板用导电弓架试验方法

Railway applications - Current collection systems - Pantographs, testing methods for carbon contact strips; German version EN 50405:2006

DIN EN 50367 Berichtigung 1:2007 轨道交通.集流系统.导电弓架和架空线之间交互作用的技术标准(实现自由通道)

Railway applications - Current collection systems - Technical criteria for the interaction between pantograph and overhead line (to achieve free access); German version EN 50367:2006, Corrigenda to DIN EN 50367 (VDE 0115-605):2006-11

DIN EN 50367:2006 轨道交通.集流系统.电杆和架空线之间交互作用的技术标准(实现自由通道)

Railway applications - Current collection systems - Technical criteria for the interaction between pantograph and overhead line (to achieve free access); German version EN 50367:2006

BS EN 61377-1:2006 轨道交通.机车车辆.反向供电交流电动机及其控制系统的联合测试

This part of IEC 61377 applies to the combinations of motor(s), inverter and their control system, and its object is to specify:

Railway applications - Rolling stock - Combined testing of inverter-fed alternating current motors and their control system

IEC 61377-1:2006 轨道交通.铁路车辆.逆变器供电的交流电动机及其控制系统的联合试验

This part of IEC 61377 applies to the combinations of motor(s), inverter and their control system, and its object is to specify: − the performance characteristics of electric drives consisting of an inverter, alternating current motors, and the related control system; − methods of verifying these performance characteristics by tests. Two categories of combined systems can be considered: a) alternating current motors fed from an inverter without any control between the mechanical output (torque, speed) and the inverter itself (mostly auxiliary motors, for example cooling fan motors). The motor works exactly as if it were fed from a busbar (at variable frequency and voltage or not); b) alternating current motor(s) (paralleled or not) with a control between the mechanical output and the inverter. The first category of systems is tested according to IEC 60349-2 and IEC 61287-1. This standard applies to the second category, mainly traction drives. IEC 60349-2 applies to convertor-fed alternating current motors, IEC 61287-1 to power electronic convertors, IEC 60571 to electronic equipments, and this standard applies to the combination of motor(s), inverter, and their control system. As a consequence, IEC 60349-2 describes the tests to demonstrate the compliance of the motor to its specification, IEC 61287-1 does the same for the inverter. It is self-evident that some of the tests mentioned in this standard generally may replace the corresponding ones described in the abovementioned standards. An agreement should be reached between the parties to avoid the duplication of tests. A complete combined test is heavy, and often requires high power, which is not always available in a workshop. An agreement between user and manufacturer may be reached to allow testing either in the workshop or on the vehicle. Testing may be split off partially in a workshop and partially on track. At the time of drafting this standard, only the following combinations of motors and inverters were used for traction applications, but it may also apply to other combinations which may be used in the future: − asynchronous motors fed by voltage stiff (voltage source) inverter; − asynchronous motors fed by current stiff (current source) inverter; − synchronous motors fed by current stiff (current source) inverter. The input of these inverters can be a d.c. supply line, a rectifier, a chopper, an input convertor, a diesel generator with integrated rectifiers, etc.

Railway applications - Rolling stock - Part 1: Combined testing of inverter-fed alternating current motors and their control system

KS C IEC 61377-2:2005 铁路设施.机车车辆.联合试验.第2部分:反向直流牵引电动机及其控制设备

이 규격은 전동기, 초퍼(chopper) 및 제어기로 이루어진 복합 시스템에 적용하고, 그

Railway applications-Rolling stock-combined testing-Part 2:Chopper-fed direct current traction motors and their control

KS C IEC 61374:2005 铁路用电气设备.牵引供电系统中的过电压

이 규격은 견인 전원 시스템의 과도 과전압에 관련된 유용한 정보를 규정하고 있다. 이 규격

Overvoltages in traction supply systems

DIN EN 50163:2005 轨道交通.牵引系统的供电电压

Railway applications - Supply voltages of traction systems; German version EN 50163:2004

BS EN 50163:2004 轨道交通.牵引系统的供电电压

This European Standard specifies the main characteristics of the supply voltages of traction systems, such as traction fixed installations, including auxiliary devices fed by the contact line, and rolling stock, for use in the following applications : -railways; -guided mass transport systems such as tramways, elevated and underground railways mountain railways, and trolleybus systems; -material transportation systems. This European Standard does not apply to -mine traction systems in underground mines, -cranes, transportable platforms and similar transportation equipment on rails, temporary structures (e.g. exhibition structures) in so far as these are not supplied directly or via transformers from the contact line system and are not endangered by the traction power supply system, -suspended cable cars, -funicular railways. This European Standard deals with long term overvoltages as shown in the Annex A.

Railway applications - Supply voltages of traction systems

BS EN 50163:2004+A1:2007 轨道交通.牵引系统的供电电压

This European Standard specifies the main characteristic of the supply voltages of traction systems,such as traction fixed installations,including auxiliary devices fed by the contact line,and rolling stock,for use in the following applications: -railways; -guided mass transport systems such as tramways,elevated and underground railways mountain railways,and trolleybus systems; -material transportation systems. This European Standard does not apply to: -mine traction systems in underground mines; -crane, transportable platforms and similar transportation equipment on rails,temporary structures(e.g. exhibition structures)in so far as these are not supplied directly or via transformers from the contact line system and are not endangered by the traction power supply system; -suspended cable cars; -funicular railways. This European Standard deals with long term overvoltages shown in the Annex A.

Railway applications. Supply voltages of traction systems

DIN EN 50151:2004 轨道交通.固定装置.电力牵引.复合绝缘子的特殊要求

Railway applications - Fixed installations - Electric traction - Special requirements for composite insulators; German version EN 50151:2003

DIN EN 60077-5:2004 轨道交通.机车车辆用机电设备.第5部分:电工元件.HV熔断器规则

Railway applications - Electrotechnical equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV fuses (IEC 60077-5:2003); German version EN 60077-5:2003

NF F63-355:2004 轨道交通.有特殊防火效能的铁路机车电缆.薄壁和标准壁.使用指南

Railway applications - Railway rolling stock cables having special fire performance - Thin wall and standard wall - Guide to use.