T09 卫生、安全、劳动保护 标准查询与下载

JIS D 6802:1997 自动制导装置系统.安全总则

この規格は，無人搬送車(無人けん引車及び無人フォークリフトを含む。)を中心にした搬送ンステムの導人計画段階から設置運用までの安全確保に関する一般事項について規定する。

Automatic guided vehicle systems -- General rules on the safety

BS AU 209-8:1997 车辆安全性.货车货舱锁紧系统规范

Specifies requirements for the performance of locking systems fitted to all closures through which access may be gained to secure load compartments of goods vehicles. Applies only to vehicles with fully enclosed load carrying areas.

Vehicle security - Specification for locking systems for goods vehicle load compartments

ISO 12097-2:1996 道路车辆 气囊组件 第2部分:气囊组件的试验

Establishes uniform test methods and requirements for airbag modules in road vehicles.

Road vehicles - Airbag components - Part 2: Testing of airbag modules

JT/T 224-1996 中负荷车辆齿轮油安全使用技术条件

本标准规定了中负荷车辆齿轮油安全使用的润滑、防锈、抗腐蚀、抗磨、抗擦伤、抗疲劳、贮存稳定性等必须具备的技术条件。 本标准适用于汽车传动机构为准双曲面齿轮或运行条件较为苛刻的螺旋伞齿轮等中负荷车辆齿轮使用的齿轮油。

Specifications of safe using automobile heavy duty gear oils

BS AU 209-6a:1996 车辆安全性.乘用车和改型汽车锁死系统规范

This Part of BS AU 209 specifies requirements for the performance of dead locking systems fitted to passenger compartment doors, luggage compartment or hatchback doors, engine compartment access, fuel filler aperture lids and sun-roof equipment of passenger cars and car derived vehicles. This Part of BS AU 209 is intended to supplement but not replace the requirements of Part la and, for a centrally locked system, Part 5b.

Vehicle security - Specification for dead locking systems for passenger cars and car derived vehicles

BS AU 209-0:1996 车辆安全性.车辆安全设备/系统应用指南

This British Standard is intended to provide information and guidance on the various types of security devices and systems that are available, the range of protection devices and systems that are available, the range of protection they offer, and where appropriate the British Standard to which they should conform. Security aspects of how and where the vehicle is left are also considered.

Vehicle security - Guide to the application of security devices/systems to vehicles

BS AU 209-5b:1996 车辆安全性.乘用车和改型汽车中心动力锁死系统规范

This Part of BS AU 209 specifies requirements for the performance of central power locking systems fitted to passenger compartment doors, luggage compartment or hatchback doors, engine compartment access, fuel filler aperture lids and sun-roof equipment of passenger cars and car derived vehicles. This Part of BS AU 209 is intended to supplement but not replace the requirements of Part la.

Vehicle security - Specification for central power locking systems for passenger cars and car derived vehicles

JT 230-1995 汽车导静电橡胶拖地带

本标准规定了汽车导静电橡胶拖地带（以下简称拖地带）的产品分类、技术要求、试验方法、检验规则以及包装、标志、运输、装卸和储存/ 本标准适用于油罐车、液化石油气罐车等装运易燃易爆货物的车辆和其他需导除静电的车辆所安装的拖地带。

Rubber belt of electrostatic conductivity for motor vehicle

BS AU 209 Pt.4:1995 车辆安全性.第4部分:客运车辆和汽车用安全玻璃规范

Vehicle security. Specification for security glazing for passenger cars and car derived vehicles

CSA CEI-E79-18-95-CAN/CSA-1995 .第18部分爆炸气体环境下的电器设备:装保护罩通用指令第1号.CEI/IEC 79-18:1992

Materiel Electrique Pour Atmospheres Explosives Gazeuses Partie 18: Encapsulagem Fiche No 1; CEI/IEC 79-18: 1992

Materiel Electrique Pour Atmospheres Explosives Gazeuses Partie 18: Encapsulage"m" Fiche No 1; CEI/IEC 79-18: 1992

JT/T 201-1995 汽车维护工艺规范

Motor vehicle maintenance regulation

CSA CEI-E79-7-95-CAN/CSA-1995 第七部分爆炸气体环境下的电器设备:增加安全通用指令第1号.CEI/IEC 79-7:1990

Materiel Electrique Pour Atmospheres Explosives Gazeuses Septieme Partie: Securite Augmenteee Fiche No 1; CEI/IEC 79-7: 1990

Part 7 Electrical Equipment in Explosive Gas Environment: Increased Safety, General Instruction No 1.CEI/IEC 79-7:1990

NBN-EN 29409-1-1993 操作工业机器人．机械界面．环（A式）（ISO 9409：1：1988）

Manipulating industrial robots. Mechanical interfaces. Part 1: Circular (form A) (ISO 9409-1:1988)

QC/T 57-1993 汽车匀速行驶车内噪声测量方法

本标准规定了汽车匀速行驶车内噪声的测量方法。 　　本标准适用于M、N类汽车。

Measurement method of interior noise of automobile running at constant speed

BS AU 228-2:1989 道路车辆碰撞试验.第2部分:使用光学仪器的测量技术规范

Defines performance criteria using an optical data channel to facilitate comparisons between results obtained by different laboratories.

Impact tests on road vehicles - Specification for measurement techniques using optical instrumentation

ISO 8936:1988 大篷车的遮篷.安全要求

Caravan awnings; safety requirements

ISO 7644:1988 道路车辆.压燃(柴油机)发动机排气不透明度的测量.加载减速排烟试验

Road vehicles; measurement of opacity of exhaust gas from compression-ignition (diesel) engines; lug-down test

ISO 7645:1988 道路车辆.压燃(柴油机)发动机排气不透明度的测量.恒定单速试验

Road vehicles; measurement of opacity of exhaust gas from compression-ignition (diesel) engines; steady single-speed test

BS AU 209-3:1988 车辆安全性.第3部分:乘用车和改型车玻璃安装用安全标记规范

This Part of BS AU 209 specifies requirements for thesecurity marking of the glazing fitted to passenger carsand car derived vehicles.This standard does not apply to the markings identifyingthe glazing manufacturer or indicating compliance withnational or international requirements for safety glazingmaterials.

Vehicle security - Specification for security marking of glazing for passenger cars and car derived vehicles

BS AU 209-2:1988 车辆安全性.车内娱乐和通讯设备防盗安全系统规范

Requirements for the performance and use of systems intended to deter or prevent the theft of in-car radio, audio and visual equipment.

Vehicle security - Specification for security systems against theft of in-car equipment for entertainment and communication purposes