共找到 268 条与 载货汽车 相关的标准,共 18 页
本标准规定了三轮汽车和低速货车的质量要求、检测方法和检验规则。 本标准适用于三轮汽车和低速货车的质量评定。
Technical Specincationsof Quality Evaluation for Tri-wheel Vehicle and Low-speed Vehicle
This European Standard applies to body structures on commercial vehicles and on trailers with a maximum total weight of more than 3 500 kg. This European Standard sets out basic minimum requirements for standard vehicle bodies (side walls, front and rear walls) and for reinforced vehicle bodies and specifies appropriate tests. This European Standard does not apply to swap bodies, nor to box type vans, i.e. vehicles where the driver cabin and the cargo space form one unit.
Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements
Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements.
This European Standard applies to body structures on commercial vehicles and on trailers with a maximum total weight of more than 3 500 kg. This European Standard sets out basic minimum requirements for standard vehicle bodies (side walls, front and rear walls) and for reinforced vehicle bodies and specifies appropriate tests. This European Standard does not apply to swap bodies, nor to box type vans, i.e. vehicles where the driver cabin and the cargo space form one unit.
Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements; German version EN 12642:2006
This part of ISO 21308 provides a set of codes for the exchange of dimensional data between truck chassis manufacturers and bodywork manufacturers. It applies to commercial vehicles as defined in ISO 3833, having a maximum gross vehicle mass above 3 500 kg. The process of exchanging the above information can involve: - chassis manufacturer; - chassis importer; - chassis dealer; - one or more bodywork manufacturers; - bodywork component suppliers, e.g. manufacturers of demountable bodies, cranes and loading equipment, tipping equipment.
Road vehicles - Product data exchange between chassis and bodywork manufacturers (BEP) - Part 2: Dimensional bodywork exchange parameters
Covers the safe securement and loading of timber and sugar cane loads on vehicles.
Load securement on vehicles Part 4: Timber and sugar cane
Covers the safe securement and loading on vehicles of loose bulk loads.
Load securement on vehicles Part 5: Loose bulk loads
Covers the safe securement and loading of glass sheeting on vehicles.
Load securement on vehicles Part 9: Glass sheeting
Covers the safe securement and loading of metal loads on vehicles.
Load securement on vehicles Part 3: Metal loads
Covers the safe securement and loading of containers on vehicles.
Load securement on vehicles Part 6: Containers
Covers the safe securement and loading of general freight on vehicles.
Load securement on vehicles Part 2: General freight
Covers the safe securement and loading on vehicles of abnormal loads.
Load securement on vehicles Part 7: Abnormal loads
Covers the safe securement and loading of dangerous goods on vehicles.
Load securement on vehicles Part 8: Dangerous goods
ISO 24134:2006 specifies the safety requirements for controls and control systems for the following automated functions of industrial trucks: steering (excluding direct mechanical guidance); travel; lifting and lowering operations; load manipulations, e.g. rotation, reach, slewing, tilting, clamping; combination and/or sequence of these movements. ISO 24134:2006 is intended for use in conjunction with one or more of the applicable parts of ISO 3691. It is not applicable to, and does not include, requirements for the following: safety equipment (e.g. devices for height limitation, speed limitation) used to override driver control; operation in severe conditions (e.g. extreme climates, freezer applications, strong magnetic fields); operation in environments subject to special rules (e.g. potentially explosive atmospheres); electromagnetic compatibility; transportation of passengers; handling of loads, the nature of which could lead to dangerous situations (e.g. molten metals, acids/bases, radiating materials). Limitations in the scopes of the applicable parts of ISO 3691 also apply to ISO 24134:2006.
Industrial trucks - Additional requirements for automated functions on trucks
This International Standard specifies the safety requirements for controls and control systems for the following automated functions of industrial trucks: - steering (excluding direct mechanical guidance); - travel; - lifting and lowering operations; - load manipulations, e.g. rotation, reach, slewing, tilting, clamping; - combination and/or sequence of the above movements. NOTE The control system is generally part of the truck but can include components external to the truck, e.g. the means of guidance for automated steering. This International Standard is intended for use in conjunction with one or more of the applicable parts of ISO 3691. This International Standard is not applicable to, and does not include, requirements for the following: - safety equipment (e.g. devices for height limitation, speed limitation) used to override operator control; - operation in severe conditions (e.g. extreme climates, freezer applications, strong magnetic fields); - operation in environments subject to special rules (e.g. potentially explosive atmospheres); - electromagnetic compatibility; - transportation of passengers; - handling of loads, the nature of which could lead to dangerous situations (e.g. molten metals, acids/bases, radiating materials). Limitations in the scopes of the applicable parts of ISO 3691 also apply to this International Standard.
Industrial trucks - Additional requirements for automated functions on trucks
1.1 This specification covers the general requirements for the Type IV Cargo Bed Cover (CBC). The Type IV Cargo Bed Cover is a removable general purpose rigid enclosure for the cargo bed of the M923, 5 Ton Cargo Truck/M1083, 5 Ton Medium Tactical Vehicle (MTV)/M1095, 5 Ton MTV Trailer. The CBC provides environmental protection and security for mission equipment and items of general transport.1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parenthesis are for information only.1.3 The following safety hazards caveat pertains only to the test required portion, Section 4, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.
Standard Specification for Cargo Bed Cover, Type IV (M923, 5 Ton Cargo Truck/M1083, 5 Ton Medium Tactical Vehicle (MTV)/M1082, 5 Ton MTV Trailer)
Swap bodies and commercial vehicles - Tarpaulins - Part 1 : minimum requirements.
This Standard specifies minimum requirements and test methods for cargo securing devices and for front and rear seats in passenger cars, station wagons and multipurpose vehicles in order to protect passengers against unsecured cargo.#,,#
Securing of cargo in road vehicles - Part 2: Securing of cargo in passenger cars, station wagons and multi-purpose passenger cars
本部分规定了农用运输车的要求、检验及判定。 本部分适用于四轮农用运输车和三轮农用运输车。
Rules for the inspection of power-driven vehicles for import and export--Part 3: Agricultural vehicles
This specification covers the requirements for five types of two— wheeled hand trucks.
TRUCKS, HAND, TWO-WHEELED
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号