共找到 268 条与 载货汽车 相关的标准,共 18 页
This International Standard specifies three laboratory methods for testing certain essential strength characteristics of disc wheels, spoke wheels and demountable rims intended for road use on commercial vehicles, buses, trailers and multipurpose passenger vehicles, as defined in ISO 3833. The test methods are a) disc wheel dynamic cornering fatigue test; b) disc wheels and wheels with demountable rims — dynamic radial fatigue test; and c) wheels with demountable rims — dynamic cornering fatigue test.
Road vehicles - Wheels/rims for commercial vehicles - Test methods
This International Standard specifies the layout of pedals of self-propelled sit-down rider-controlled industrial trucks, as defined in Parts 1, 2, 3 and 6 of ISO 3691.
Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks - Rules for the construction and layout of pedals
Technical cdriteria for business conveyance van
1.1 Scope This specification covers the performance requirements for the Type I Cargo Bed Cover (CBC). The Type I Cargo Bed Cover is a removable general purpose rigid enclosure for the cargo bed of the M1037, M1042, M1097, and M1113 High-Mobility Multipurpose Wheeled Vehicle (HMMWV). The Type I CBC provides environmental protection and security for mission equipment and items of general transport.1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parenthesis are for information only.1.3 The following safety hazards caveat pertains only to the test required portion, Section , of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Performance Specification for Cargo Bed Cover (CBC) HMMWV, Type I
本标准规定了混凝土泵车术语和定义、技术要求、试验方法、检验规则、产品标牌、使用说明书和随车文件、包装、运输、贮存。 本标准适用于采用已定型的汽车二类底盘改装的臂架式混凝土泵车。车载式混凝土泵车参照执行。
Truck mounted concrete pump
Securing of cargo on road vehicles - Part 3: Securing of cargo in truck station wagons (closed body)
A-A-52511, dated 14 September 1995, has been reviewed and determined to be valid for use in acquisition
COMMERCIAL ITEM DESCRIPTIONS (CIDS) TRUCKS, DOLLY, RECTANGULAR, WITH 4 SWIVEL CASTERS (GENERAL PURPOSE AND MACHINERY) (METRIC)
A-A-52544, dated 12 December 1995, has been reviewed and determined to be valid for use in acquisition
FIFTH WHEEL ASSEMBLY -33 INCH UNIVERSAL, TRUCK-TRACTOR, 25000 LBS. CAPACITY
A-A-52543, dated 12 December 1995, has been reviewed and determined to be valid for use in acquisition
FIFTH WHEEL ASSEMBLY -36 INCH UNIVERSAL, TRUCK-TRACTOR, 45000 LBS. CAPACITY
本标准规定了随车起重运输车的定义、要求、试验方法、检验规则、标志、使用说明书、随车文件、运输、贮存。 本标准适用于以定型载货汽车或定型汽车底盘改装的随车起重运输车。
Truck with loading crane
This International Standard specifies open-loop test methods for determining the effect of braking on the course-holding and directional behaviour of heavy vehicles or heavy vehicle combinations when braking is accomplished using — the service-brake system, or — the retarder or engine brake only. This International Standard is applicable to heavy vehicles — i.e. commercial vehicles, commercial vehicle combinations, buses and articulated buses as defined in ISO 3833 — covered by Categories M3, N2, N3, O3 and O4 of UNECE (United Nations Economic Commission for Europe) and EC vehicle regulations. These categories pertain to trucks and trailers with a maximum mass above 3,5t and to buses and articulated buses with a maximum mass above 5t.
Heavy commercial vehicles and buses - Braking in a turn - Open-loop test methods
This standard provides minimum requirements for lashing points on commercial vehicles and platform trailers up to a total mass 3,5 t, which are used for goods transport.
Securing of cargo road vehicles - Part 1: Lashing points on commercial vehicles for goods transportation up to a total mass of 3,5 t; Minimum requirements
This British Standard specifies requirements for the dimensions, construction, and strength of towing pole assemblies to be used commercially for towing passenger cars and light vans. This standard is applicable to towing pole assemblies for use by towing vehicles of up to 3 500 kg gross mass to tow vehicles of up to 3 500 kg gross mass. NOTE The towing pole assemblies specified in this British Standard are intended for towing broken-down vehicles.
Passenger cars and light vans - Commercial towing pole assemblies - Specification
This SAE Recommended Practice describes the test procedures for conducting frontal impact restraint component tests for heavy truck applications. Its purpose is to establish recommended test procedures that will standardize restraint system testing for heavy trucks. Descriptions of the test set-up, test instrumentation, photographic/video coverage, and the test fixtures are included.
Occupant Restraint System EvaluationFrontal Impact Component-Level Heavy Trucks
This SAE Recommended Practice describes the test procedures for conducting frontal impact restraint system tests for heavy truck applications. Its purpose is to establish recommended test procedures that will standardize restraint system testing for heavy trucks. Descriptions of the test set-up, test instrumentation, photographic/video coverage, and the test fixtures are included.
Occupant Restraint System EvaluationFrontal Impact System-Level Heavy Trucks
本标准规定了厢式运输车的要求、试验方法、检验规则及标志、运输、贮存。 本标准适用于在已定型的汽车底盘上改装的厢式运输车和厢式运输半挂车。
van
本标准规定了车辆运输车的要求、试验方法、检验规则、标志、使用说明书及随车文件、运输、贮存等。 本标准适用于车辆运输半挂车、车辆运输全国车及在定型汽车底盘上改装的车辆运输车。
vehicle transporter
Safety of industrial trucks - Test methods for measuring vibration.
This SAE Recommended Practice provides guidance for the construction, operation, and maintenance of CNG powered medium and heavy-duty trucks.
Recommended Practices for CNG Powered Medium and Heavy-Duty Trucks
이 규격은 로로선(Ro/Ro Ship)에 도로 차량을 싣는데 있어서 능률적이고 견고한 고박
Lashing and securing arrangements on road vehiclesfor sea transportation on Ro/Ro ships-Part 1:Commercial vehicles and combinations of vehicles(semi-trailers excluded)
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号