共找到 612 条与 船舶用材料及其检验方法 相关的标准,共 41 页
This commercial item description (CID) covers single-compartment and twocompartment, baking and roasting, electric, forced convection ovens.
OVEN, BAKING AND ROASTING, FORCED CONVECTION, ELECTRIC (NAVAL SHIPBOARD)
This commercial item description (CID) covers self-service, mechanically refrigerated, cold food counters with refrigerated storage compartment.
COLD FOOD COUNTER, MECHANICALLY REFRIGERATED (NAVAL SHIPBOARD)
Orderina data. Title, number, and date of this CID Type and size required When required, manuals shall be in accordance with ASTM F 760
URN, COFFEE, SINGLE AND TWIN, AUTOMATIC, ELECTRIC (NAVAL SHIPBOARD)
MIL-M-82433A, dated 5 April 1972, is inactive for new design and is no longer used, except for replacement purposes.
MOTOR, DIRECT CURRENT (FOR TORPEDO MK 46 MOD 1)
MIL-P-82459, including Amendment 1, dated 1 July 1968, is inactive for new design and is no longer used, except for replacement purposes.
PRESSURE TRANSDUCER (FOR TORPEDO MK 46 MOD 0 AND MOD 1)
MIL-P-82427CI dated 13 March 1985, is inactive for new design and is no longer used, except for replacement purposes.
POWER UNIT (FOR TORPEDO MK 46 MOD 1)
MIL-G-81065A, including Amendment 2, dated 8 January 1971, is inactive for new design and is no longer used, except for replacement purposes.
GYRO-PENDULUM ASSEMBLY (FOR TORPEDO MK 46 MOD 0 AND MK 46 MOD 1)
MIL-C-l9113A, including Amendment 2, dated 4 April 1984, is inactive for new design and is no longer used, except for replacement purposes.
COMPRESSORS, RECIPROCATING, ELECTRIC MOTOR DRIVEN, NAVAL SHIPBOARD LOW PRESSURE AIR SERVICE
MIL-F-24713, dated 21 February 1989, is inactive for new design and is no longer used, except for replacement purposes.
FREQUENCY CHANGER, STATIC, AIR COOLED (NAVAL SHIPBOARD)
MIL-S-81054A, dated 23 September 1976, is inactive for new designand is no longer used, except for replacement purposes.
STEEL, BARS AND FORGINGS, CHROMIUM-NICKEL- MOLYBDENUM-VANADIUM (FOR TORPEDO MK 46 MOD 0)
本标准规定了金属材料在室温(15^35℃)及大气环境下,悬臂弯曲加载的低周疲劳表面裂纹扩展速率的试验方法。 本标准适用于在等幅应变条件下.用矩形载面试样测定金属材料及焊接接头大于10-5mm/c的表面裂纹扩展速率。
Test method for low cycle faitigue surface crack growth rates of metallic materials
本标准规定了中速柴油机整体曲轴钢锻件的供货状态、技术要求和检验规则。 本标准适用于用整体锻造方法生产的中速柴油机曲轴钢锻件的制造、验收。
Specification of solid crankshaft forgings for median speed diesel engine
Technical requirements and inspection methods for Pb-Sn-Cu alloy antifriction coating
This notice should be filed in front of MIL-G-l6265F, dated 5 April 1993.
GASKETS, METALLIC-FLEXIBLE GRAPHITE AND METALLIC ASBESTOS, SPIRAL WOUND (FOR NAVY FLANGED JOINTS IN PIPING SYSTEMS)
本标准规定了船舶建造气体保护及自保护电弧焊用碳钢药芯焊丝的技术要求、试验方法、检验规则及包装等。 本标准适用于碳钢药芯焊丝的研制、生产和使用。
Carbon steel flux cored wires for arc welding in shipbuilding
本标准规定了船板在造船施工中的检验状态、缺陷面积的计算方法、缺陷深度的测量、表面质量的评定和表面缺陷整修要求。 本标准适用于船板在造船施工中的表面质量评定及表面缺陷的整修。
Standard for the plate surface quality evalution and the repairs of surface's defects during shipbuilding
本标准规定了压电陶瓷电极结合强度的试验方法。 本标准适用于测试压电陶瓷的电极与陶瓷的结合强度。
Test methods for piezoelectric ceramics electrode joint strength
This amendment forms a part of MIGC-S4166B(SH), dated 18 July 1991,and is approved for use within the Naval Sea Systems Comnand, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
COOLER, DRINKING WATER, MECHANICALLY REFRIGERATED, SELF-CONTAINED, NAVAL SHIPBOARD
この規格は,船舶の外板などに用いるアルミニウム合金の押出形材()(以下,形材という。)について規定する。注() テーパ付きアルミニウム板とスチフナとが一体化したアルミニウム合金製押出形材。
Shipbuilding -- Aluminium alloy extruded shapes
This amendment forms a part of MIL-C-l573OM(SH) dated 24 May 1995,and is approved fours e by the Naval Sea Systems Command, and is available foru se by all Departments anAdg encies of the Department of Defense.
COOLERS, FLUID, NAVAL SHIPBOARD: LUBRICATING OIL, HYDRAULIC OIL, AND FRESH WATER
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号