共找到 612 条与 船舶用材料及其检验方法 相关的标准,共 41 页
MIL-0-81 144B, dated 19 November 1970 is inactive for new design and is no longer used, except for replacement purposes.
OSCILLATOR SUBASSEMBLY (FOR TORPEDO MARK 37 MODS 0, 2, AND 3)
MIL-I-l9028E, dated 3 May 1971 is inactive forsnew design and is no longer used, except for replacement purposes.
INVERTER (FOR TORPEDO MARK 37 MODS 0, 2, AND 3)
MIL-H-22868, dated 21 March 1961 is inactive for new design and is no longer used, except for replacement purposes.
HYDROGEN PEROXIDE, E-STABILIZED, 70% AND 90% (FOR TORPEDO USE)
MIL-R-81158A, dated 14 March 1966 is inactive for new design and is no longer used, except for replacement purposes.
REAR COVER ASSEMBLED UNIT (FOR TORPEDO MARK 37 MODS 0 AND 1)
MIL-T-81148B, dated 11 August 1972 is inactive for new design and is no longer used, except for replacement purposes.
TRANSFORMER, DISCRIMANATOR (FOR TORPEDO MARK 37 MODS 0, 2, AND 3)
Orderina Data. Acquisition documents should specify the following: (a) Title, number, and date of This Commercial Item Description. (b) Manufacturer name and model desired. (c) Quantity required.
SEXTANT, MARINE [Superseded: NAVY MIL-S-24656 CANC NOTICE 1, NAVY MIL-S-24656]
This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense.
PUMPS AND MOTORS, POWER, OIL HYDRAULIC (NAVAL SHIPBOARD USE)
MIL-T-l9383A(OS) is inactive for new design and is no longer used, except for replacement purposes.
TEST SET, SYNCHRO TRANSMITTER MARK 312 MOD 0 (FOR TORPEDO MARK 37 MODS 0, 2, AND 3)
This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense.
FILTER-SEPARATORS AND FILTER-ELEMENTS, FLUID, PRESSURE, AVIATION AND DIESEL FUEL, NAVAL SHIPBOARD
This specification is approved for use by all Departments and Agencies of the Department of Defense.
ENAMEL, EQUIPMENT, LIGHT GRAY, (NAVY FORMULA NO. 111)
本标准规定了船用金属材料试样制备的一般要求及力学性能试样、焊接接头试样、工艺性能试样、金相试样、化学分析试祥和船舶专用性能试样制备的基本要求。 本标准适用于船用金属材料常用理化性能试样和专用性能试样的制备。
Technical requirements for sample preparation of marine metal materials
本标准规定了船用阻燃安全网的产品分类、技术要求、检验规则以及标志、包装和贮运等。 本标准适用于船舶建造、修理或其他有明火高处作业的阻燃安全网,建筑作业用阻燃安全网亦可参照使用。
Marine flame retardant safety net
MIL-P-22314(OSl, dated 17 February 1960, with Amendment 3 dated 22 September 1971, is hereby reinstated and may be used for acquisition.
PROPELLANT, US NAVY GUNS, BALLISTIC APPENDIX
This notice should be filed in off rMoInLt- D-24304B(SH) dated 5 July 1988 and Amendment 2, dated 22 February 1991.
DIFFERENTIAL PRESSURE TRANSDUCER EQUIPMENT (ELECTRICAL) (NAVAL SHIPBOARD USE)
本标准规定了金属工件现场金相检验面的制备要求,以及醋酸纤维素薄膜复型的制作和检验方法。 本标准适用于金属工件的非破坏性金相检验。
On-site metallographic replica inspection method
Aluminum silicate refractory fiber needle punched blanket
本标准规定了在充水管内用驻波法测量正入射时水声材料或水声结构复反射系数的测量方法。 本标准适用于水下应用的水声材料、水声结构的低频声学性能的测量、检测和鉴定。
Measurement method of standing wave tube of hydroacoustic material
本标准规定了铸造保温冒口套的分类、技术要求、试验方法、检验规则和贮存保管。 本标准适用于铸钢件用保温冒口套,其他铸件亦可参照采用。
Cast insulation riser sleeve
本标准规定了陶质焊接衬垫的产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于船用低碳钢和高强度钢在手工电弧焊、二氧化碳气体保护焊、气电自动立焊和自动埋弧焊等单面焊接双面成型时使用的陶质焊接衬垫的制造与验收。
Ceramic Welding Backing
本标准规定了船体杂散电流腐蚀的判断准则和防护方法。 本标准适用于因船舶焊接、供电系统和电气设备等引起的杂散电流造成船体水下壳体或附属体产生腐蚀的防护。近海结构、港工设施由于杂散电流引起腐蚀的防护亦应参照使用。
The Protection Method of Ship Hull Stray Current Corrosion
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号