U18 小型船总体 标准查询与下载

ISO 9650-3:2009 小型船舶.充气救生艇.第3部分:材料

Small craft - Inflatable liferafts - Part 3: Materials

SANS 12215-5:2009 小艇.船体结构及尺寸.第5部分:单体船的设计压力、设计应力、及结构尺寸

Applies to the determination of design pressures and stresses, and to the determination of the scantlings, including internal structural members of monohull small craft constructed from fibre-reinforced plastics, aluminium or steel alloys, glued wood or

Small craft - Hull construction and scantlings Part 5: Design pressures for monohulls, design stresses, scantlings determination

ISO 10862:2009 小型船舶.梯形安全带用快拆杆系统

Small craft - Quick release system for trapeze harness

DIN EN 1914:2009 内河航行船舶 工作船舶、 船载小艇和救生艇

This European Standard applies to boats according to Annex II of Directive 2006/87/EC that are used on inland navigation vessels as work boats, ship's boats and lifeboats. It also applies to boats that are used on inland waterways -- as life-saving vessels if no special life-saving equipment is specified for the area of use, or -- for the transport of a limited number of persons or relatively small working loads in the construction site area and over comparatively short distances. This standard does not apply to recreational craft according to Directive 94/25/EC.

Inland navigation vessels - Work boats, ship's boats and lifeboats; English version of DIN EN 1914:2009-04

DIN EN 15609:2009 液化石油气(LPG)和附件.船只、游艇和其他小船用液化石油气(LPG)推进系统.安装要求

This European Standard specifies the requirements for the LPG propulsion systems on craft with hull lengths less than or equal to 24 meters, see Directive 94/25.

LPG equipment and accessories - LPG propulsion systems for boats, yachts and other craft - Installation requirements; English version of DIN EN 15609:2009-02

NF J95-042-1:2008 小型船.电动游艇发出的气载噪声.第1部分:经过测量程序

Small craft - Airborne sound emitted by powered recreational craft - Part 1 : pass-by measurement procedures.

NF J95-046-6:2008 小型船.船体构造和船材尺度.第6部分:构造排列和详细资料

Small craft - Hull construction and scantlings - Part 6 : structural arrangements and details.

BS EN ISO 14509-1:2008 小型船舶.动力娱乐船排放的空气噪声.第1部分:经过测量程序

This part of ISO 14509 specifies the conditions for obtaining reproducible and comparable measurement results of the maximum sound pressure level of airborne sound generated during the passage of powered recreational craft of up to 24 m length of hull, including inboards, stern drives, personal watercraft (PWC) and outboard motors. It also specifies standard craft based type tests for stern drives with integral exhaust systems and for outboard motors. It also specifies the procedure to be followed if, in addition to the maximum sound pressure level, the determination of the sound exposure level is desired. NOTE For craft other than those specified above, ISO 2922 is applicable for sound emission measurements. The accuracy grade of the acoustical test procedures specified in this part of ISO 14509 is engineering grade (grade 2).

Small craft - Airborne sound emitted by powered recreational craft - Part 1: Pass-by measurement procedures

KS V ISO 8385:2008 挖泥船.分类

이 표준은 준설된 물질의 집적, 인양, 운송 및 처리를 위해 설계된 모든 형태의 준설선을

Dredgers-Classification

KS V ISO 6185-1:2008 充气艇.第1部分:最大电动机功率为4.5kW的船

이 표준은 최소 1 800 N의 부력을 가지며 전장이 8 m 미만인 팽창식 보트(고형 팽창

Inflatable boats-Part 1:Boats with a maximum motor power rating of 4.5 kW

KS V ISO 6185-2:2008 充气艇.第2部分:最大电动机功率为4.5kW∼15kW的船

이 표준은 최소 1 800 N의 부력을 가지며 전장이 8 m 미만인 팽창식 보트(고형 팽창

Inflatable boats-Part 2:Boats with a maximum motor power rating of 4.5 kW∼15 kW inclusive

KS V ISO 13929:2008 小型船舶.操舵装置.齿轮传动连接系统

이 표준은 선체 길이 24 m 미만의 모든 소형 선박에서의 기어식 구동 조타 장치의 건조,

Small craft-Steering gear-Geared link systems

KS V ISO 15738:2008 船舶与海洋技术.充气救生装置用充气系统

이 표준은 SOLAS 74 및 IMO Resolution MSC.48(66)에서 채택한 I

Ships and marine technology-Gas inflation systems for inflatable life-saving appliances

KS V ISO 10592:2008 小型船舶.液压转向系统

이 표준은 선체 길이 24 m 미만의 소형 선박을 대상으로 하며, 여기에서는 제반 요구 조

Small craft-Hydraulic steering systems

KS V ISO 17357:2008 船舶与海洋技术.高压浮式充气橡胶护舷材

이 표준은 선박이 다른 선박이나 구조물의 정박과 계류에 사용할 수 있는 공기 부양 고무 펜

Ships and marine technology-High-pressure floating pneumatic rubber fenders

SANS 9093-2:2008 小艇.艇上海水门及穿艇体配件.第2部分:非金属的

Specifies requirements for the manufacture and installation of non-metallic through-hull fittings or assemblies (or both) comprising through-hull fittings, seacocks, hose fittings and/or drain plugs and components attached thereto, used in small craft of

Small craft - Seacocks and through-hull fittings Part 2: Non-metallic

SANS 12215-3:2008 小艇.船体结构和船材尺寸.第3部分:材料.钢、铝合金、木料及其它材料

Specifies requirements for materials intended for use in the construction of the hull, superstructure and appendages, in particular weldable normal and higher strength hot-rolled steel plates, wide flats, sections and bars, austenitic stainless steels, f

Small craft - Hull construction and scantlings Part 3: Materials: Steel, aluminium alloys, wood, other materials

SANS 12217-2:2008 小艇.稳定性和浮力评估和分类.第2部分:船体长度大于或等于6米的帆船

Specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. Covers the flotation characteristics of boats vulnerable to swamping. Applies to boats propelled primarily by sail (even if fitted with an auxiliary engine) of

Small craft - Stability and buoyancy assessment and categorization Part 2: Sailing boats of hull length greater than or equal to 6 m

SANS 7840:2008 小艇.耐火燃油软管

Specifies general requirements and physical tests for fire-resistant hoses for conveying petrol and diesel oil, designed for a working pressure not exceeding 0,34 MPa for hoses with nominal bore up to and including 10 mm and 0,25 MPa for hoses with large

Small craft - Fire-resistant fuel hoses

SANS 8666:2008 小艇.主要数据

Establishes uniformity of definitions of main dimensions and related data, and of mass specifications and loading conditions. Applies to small craft of hull length up to 24 m.

Small craft - Principal data