U27 救生设备 标准查询与下载

DIN EN ISO 12402-10:2006 个人漂浮设备.第10部分:个人漂浮设备和其他相关设备的选择和应用(ISO 12402-10:2006)

This part of ISO 12402 gives guidance for the selection and application of personal flotation devices complying with the other relevant parts of EN ISO 12402 and immersion suits according to ISO 15027-1 to ISO 15027-3.

Personal flotation devices - Part 10: Selection and application of personal flotation devices and other relevant devices (ISO 12402-10:2006); English version of DIN EN ISO 12402-10:2006-05

BS EN ISO 12402-1:2006 个人漂浮设备.海上行船用救生衣.安全要求

ISO 12402-1:2005 specifies the safety requirements for lifejackets intended for use on seagoing ships with regard to the technical provisions of the International Convention for the Safety of Life at Sea.

Personal flotation devices - Lifejackets for seagoing ships - Safety requirements

DLA MS70093 REV A VALID NOTICE 2-2006 降落伞开伞索锻压球型绞合线

MS70093A, dated 27 October 1999, remains inactive for new design; however, the document is valid for use.

BALL END, WIRE ROPE, SWAGING, PARACHUTE RIPCORD CABLE

DLA MIL-R-43608 A VALID NOTICE 3-2006 降落伞开降绳的一般规定

MIL-R-43608A, dated 13 January 2000, remains inactive for new design; however, the document is valid for use.

RIP CORD, PARACHUTE, PERSONNEL: GENERAL SPECIFICATION FOR

DLA MS70112 REV B VALID NOTICE 3-2006 降落伞的开降绳

MS70112B, dated 27 October 1999, remains inactive for new design; however, the document is valid for use.

RIP CORD, PARACHUTE, PERSONNEL

ISO 18813:2006 船舶和海上技术.救生艇和救生船用救生设备

This International Standard specifies design, performance, and use of various items of survival equipment carried in survival craft and rescue boats complying with the International Convention for the Safety of Life at Sea (SOLAS), 1974 (as amended), and the International Maritime Organization Life-Saving Appliance Code (LSA Code). For many items, it also includes guidelines for maintenance and periodic inspections by Administrations or ships' crews in informative Annex A.

Ships and marine technology - Survival equipment for survival craft and rescue boats

BS EN ISO 12402-8:2006+A1:2011 个人漂浮设备.配件.安全要求和试验方法

This part of ISO 12402 specifies the safety requirements and test methods for accessories used for personal flotation devices (PFDs).

Personal flotation devices. Accessories. Safety requirements and test methods

BS EN ISO 12402-10:2006 个人漂浮设备.个人漂浮设备及其相关设备的选择和使用

ISO 12402-10:2006 gives guidance for the selection and application of personal flotation devices complying with the other relevant parts of ISO 12402 and immersion suits according to ISO 15027-1 to ISO 15027-3.

Personal flotation devices - Selection and application of personal flotation devices and other relevant devices

NAVY QPL-18494-27-2006 多座可充气救生筏

This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense.

LIFE RAFTS, INFLATABLE, MULTI-PLACE

ISO 12402-10:2006 个人漂浮设备.第10部分:个人漂浮设备的选择和应用

This part of ISO 12402 gives guidance for the selection and application of personal flotation devices complying with the other relevant parts of ISO 12402 and immersion suits according to ISO 15027-1 to ISO 15027-3.

Personal flotation devices - Part 10: Selection and application of personal flotation devices and other relevant devices

ISO 15516:2006 船舶和海上技术.挂艇架发射的救生艇的降落装置

This International Standard specifies the requirements of performances, design, construction, safety, maintenance and test of launching appliances for davit-launched lifeboats. This International Standard is applicable to launching appliances for davit-launched lifeboats as well as launching appliances for davit-launched rescue boats on every kind of sea-going ship, including launching appliances for fast rescue boats on ro-ro passenger ships, but is not applicable to launching appliances for free-fall lifeboats. This International Standard is also a reference for similar appliances on inland ships.

Ships and marine technology - Launching appliances for davit-launched lifeboats

ISO 12402-8:2006 个人漂浮设备.第8部分:附件.安全要求和试验方法

This part of ISO 12402 specifies the safety requirements and test methods for accessories used for personal flotation devices (PFDs).

Personal flotation devices - Part 8: Accessories - Safety requirements and test methods

BS ISO 24408:2006 船舶和海上技术.救生设备用位置指示灯.生产组件的试验、检测和作标记

ISO 24408:2005 specifies production tests and inspections, and marking requirements for position-indicating lights used in conjunction with various items of life-saving equipment, including survival craft interior lights. Specifically, it applies to position-indicating lights which have been type approved by or on behalf of a national maritime safety administration, to the requirements of the International Maritime Organization LSA Code, for use in ships subject to the requirements of the International Convention for the Safety of Life at Sea, 1974 (as amended). The basic principles may also be considered suitable for position-indicating lights manufactured to other than the IMO requirements.

Ships and marine technology - Position-indicating lights for life-saving appliances - Testing, inspection, and marking of production units

CB/T 640-2005 救生圈架

本标准规定了救生圈架的分类、要求、试验方法、检验规则和标志。 本标准适用于救生圈架的制造和检验。

Sheif of life buoy

IEC 61097-6:2005 全球海上遇险和安全系统(GMDSS).第6部分:船用导航、气象警报和应急信息接收用窄带直接打印电报设备(NAVTEX)

This part of IEC 61097 specifies the minimum performance requirements, technical characteristics and type-testing requirements for narrowband telegraph equipment for the reception of navigational and meteorological information as required by Regulation IV/7.1.4 of the 1988 amendments to the 1974 International Convention for Safety of Life at Sea (SOLAS), and which is associated with IEC 60945. When a requirement in this standard is different from IEC 60945, the requirement in this standard takes precedence. This standard incorporates the performance standards of IMO Resolution MSC.148(77), the technical characteristics of ITU-R Recommendation M.540, takes account of the IMO Resolution A.694(17) and conforms with the ITU Radio Regulations where applicable. All text of this standard, whose meaning is identical to that in IMO Resolution MSC.148(77) and ITU-R Recommendation M.540 will be printed in italics and the Resolution/Recommendation and paragraph number indicated between brackets.

Global maritime distress and safety system (GMDSS) - Part 6: Narrowband direct-printing telegraph equipment for the reception of navigational and meteorological warnings and urgent information to ships (NAVTEX)

ISO 24408:2005 船舶和海上技术.救生器具用定位指示灯.制造设备的试验、检查和标记

This International Standard specifies production tests and inspections, and marking requirements for position-indicating lights used in conjunction with various items of life-saving equipment, including survival craft interior lights. Specifically, it applies to position-indicating lights which have been type approved by or on behalf of a national maritime safety administration, to the requirements of the International Maritime Organization LSA Code, for use in ships subject to the requirements of the International Convention for the Safety of Life at Sea (SOLAS), 1974 (as amended). The basic principles may also be considered suitable for position-indicating lights manufactured to other than the IMO requirements.

Ships and marine technology - Position-indicating lights for life-saving appliances - Testing, inspection and marking of production units

NF S74-558-2:2005 潜水服.第2部分:紧身防水橡皮衣.要求和试验方法

Diving suits - Part 2 : dry suits - Requirements and test methods.

ISO 12402-1:2005 个人漂浮设备.第1部分:海上行船用救生衣.安全要求

This part of ISO 12402 specifies the safety requirements for lifejackets intended for use on seagoing ships with regard to the technical provisions of the International Convention for the Safety of Life at Sea (SOLAS). NOTE This part of ISO 12402 also takes account of Maritime Safety Committee Resolutions MSC.48 (66) and MSC.81 (70) so far as they are applicable to lifejackets.

Personal flotation devices - Part 1: Lifejackets for seagoing ships - Safety requirements

KS V ISO 8304:2005 造船.系列3.船载驳.通风系统.主要配合尺寸

이 규격은 선박 적재 바지 시리즈 3의 환기 장치의 기본 연결구 치수를 규정한다.

Shipborne barges, series 3-Ventilation system-Principal mating dimensions

KS V ISO 8303:2005 造船.系列3.船载驳.主要作业和技术要求

이 규격은 선박 적재 바지(barge) 시리즈 3이 바지 운반선의 선상이나 내수면 항해시에

Shipborne barges, series 3－Main operational and technical requirements