V10 航空、航天材料基础标准 标准查询与下载

ARMY MIL-PRF-32076-2000 弹药整体性能规格

This specification covers the minimum unitization requirements for procurement of packaged ammunition items on 4 way entry pallets used by the Department of Defense, United States Government.

PERFORMANCE SPECIFICATION FOR UNITIZATION OF AMMUNITION

ARMY MIL-H-62185 VALID NOTICE 2-2000 M109型自推进中型榴弹炮

MIL-H-62185(AT) remains inactive for new design, however, the document is valid for acthewhen needed.

HOWITZER, MEDIUM, SELF-PROPELLED: M109 (FRG)

ASTM E2089-00(2006) 太空用材料的地面实验室原子氧交互评价的标准规程

These practices enable the following information to be available: 3.1.1 Material atomic oxygen erosion characteristics. 3.1.2 An atomic oxygen erosion comparison of four well-characterized polymers. The resulting data are useful to: 3.2.1 Compare the atomic oxygen durability of spacecraft materials exposed to the low Earth orbital environment. 3.2.2 Compare the atomic oxygen erosion behavior between various ground laboratory facilities. 3.2.3 Compare the atomic oxygen erosion behavior between ground laboratory facilities and in-space exposure. 3.2.4 Screen materials being considered for low Earth orbital spacecraft application. However, caution should be exercised in attempting to predict in-space behavior based on ground laboratory testing because of differences in exposure environment and synergistic effects.1.1 The intent of these practices is to define atomic oxygen exposure procedures that are intended to minimize variability in results within any specific atomic oxygen exposure facility as well as contribute to the understanding of the differences in the response of materials when tested in different facilities.1.2 These practices are not intended to specify any particular type of atomic oxygen exposure facility but simply specify procedures that can be applied to a wide variety of facilities.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.1.3 The values stated in SI units are to be regarded as the standard.

Standard Practices for Ground Laboratory Atomic Oxygen Interaction Evaluation of Materials for Space Applications

SAE AS3071B-2000 验收标准.磁性颗粒,荧光染料和对比染料检验

To establish the acceptance criteria for discontinuities as revealed by magnetic particle or liquid penetrant examination of aircraft utility parts as in 1.2. Primarily for use on aerospace propulsion system parts, such as pins, couplings, and fluid fittings. These criteria may be applied to any applicable item, except that the requirements of AS1177 shall apply to bolts, screws and studs, and AS5447 shall apply to nuts, both free-running and self-locking nuts. Discontinuities revealed by non-destructive test methods other than those in 1.1 shall have the acceptance criteria specified on the part standard or drawing.

R) Acceptance Criteria - Magnetic Particle, Fluorescent Penetrant, and Contrast Dye Penetrant Inspection

ASTM E2089-00 太空用材料的地面实验室原子氧交互评价的标准规程

1.1 The intent of these practices is to define atomic oxygen exposure procedures that are intended to minimize variability in results within any specific atomic oxygen exposure facility as well as contribute to the understanding of the differences in the response of materials when tested in different facilities.1.2 These practices are not intended to specify any particular type of atomic oxygen exposure facility but simply specify procedures that can be applied to a wide variety of facilities.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.1.3 The values stated in SI units are to be regarded as the standard.

Standard Practices for Ground Laboratory Atomic Oxygen Interaction Evaluation of Materials for Space Applications

NAVY MIL-T-1368 C REINST NOTICE 2-1999 铜镍合金无缝焊接管

MIL-T-1368C Interim Amendment 3, dated 24 December 1980, is hereby reinstated through 31 December 2000 and may be used for acquisition. If MIL-T-1368C has not been revised or amended by 31 December 2000, Interim Amendment 3 will be canceled.

TUBE AND PIPE, NICKEL-COPPER ALLOY, SEAMLESS AND WELDED

SAE AIR4844B-1999 合成物和金属粘接术语

The following terminology has been generated by the ATA/IATA/SAE Commercial Aircraft Composite Repair Committee (CACRC) and provides terminology for design, fabrication, and repair of composite and bonded metal structures. The purpose of this AIR is to provide terminology that should be used when developing CACRC repair documents or repair documents produced by airlines or airframe and engine manufacturers. It is intended to develop this AIR into an AS.

Composites and Metal Bonding Glossary

NAVY MIL-W-5013 L NOTICE 1-1999 航天器车轮和刹车组件的一般技术要求[代替NAVY MIL-W-005013 J]

This notice should be filed in front of MIL-W-5013, dated 31 October 1991. MIL-W-5013L is inactive for new design and is no longer used except for replacement purposes.

WHEEL AND BRAKE ASSEMBLIES AIRCRAFT, GENERAL SPECIFICATION FOR [Use In Lieu Of: NAVY MIL-W-005013 J]

ARMY MIL-C-46931 F (3)-1999 M80型7.62MM北约球状炮弹

Regardless of intended usage or packaging, F Sr C shall be performed in all weapons, including the M134 Mini Gun.

CARTRIDGE, 7.62MM, NATO, BALL, M80

ARMY MIL-G-155 A VALID NOTICE 2-1999 干燥石墨(用于弹药)

MIL-G-155A(AR), dated 20 September 1962, with Amendment 2, dated 13 July 1967, has been reviewed and determined to be valid for use in acquisition.

GRAPHITE, DRY (FOR USE IN AMMUNITION)

ARMY MIL-G-96 A VALID NOTICE 2-1999 树胶树液(用于弹药)

MIL-G-96A, dated O1 August 1969, has been reviewed and determined to be valid for use in acquisition.

GUM TRAGACANTH (FOR USE IN AMMUNITION)

ARMY MIL-A-159 D VALID NOTICE 1-1999 硫化锑(用于弹药)

MIL-A-159D(AR), dated 16 May 1972, has been reviewed and determined to be valid for use in acquisition.

ANTIMONY SULFIDE (FOR USE IN AMMUNITION)

NAVY MIL-C-22043 NOTICE 1-1999 镀漆尼龙罩(用于海军军械装备)

MIL-C-22043, dated 22 April 1960, is inactive for new design and is no longer used, except for replacement purposes.

COVER, COATED, NYLON (FOR NAVAL ORDNANCE EQUIPMENT)

NAVY MIL-C-16751 A NOTICE 1-1999 帆布覆盖(用于海军军械设备)

MIL-C-l6751A, dated 26 June 1963, is inactive for new design and is no longer used, except for replacement purposes.

COVER, CANVAS (FOR NAVAL ORDNANCE EQUIPMENT)

NAVY DOD-STD-2182 NOTICE 1-1999 电沉积修复制轴材料工程镀铬(公制)

DOD-STD-2182, dated 29 January 1985,is inactive for new design and is no longer used, except for replacement purposes.

ENGINEERING CHROMIUM PLATING (ELECTRODEPOSITED FOR REPAIR OF SHAFTING (METRIC)

SAE AS6882-1999 玻璃和塑料,窗和挡风玻璃的防水剂;应代替1999年9月30日作废的MIL-W-6882F标准

This specification covers the requirements for one type of water repellent compound.

Water Repellent, Window and Windshield, Glass and Plastic FSC 6850; Should Be Used Instead of MIL-W-6882F, Which Was Cancelled on 30 September 1999

SAE AMS-F-24610-1999 压紧固定件

This specification covers the requirements for a film-forming liquid hold down fixant. The hold down fixant solution shall consist of compounds as required, to conform to the requirements specified herein.

Fixant, Hold Down

SAE AMS-C-83873-1999 航空航天地面设备的预涂层表面洗涤剂 (AGE)

This specification establishes the requirements for biodegradable, enzyme based, precoating surface cleaners.

Cleaning Compound, Precoating Surface, Aircraft and Aerospace Ground Equipment (AGE)

ARMY MIL-M-70605 REINST NOTICE 2-1999 2.2-甲烷(4-甲基-6-二叔丁基苯酚)

MIL-M-70605(AR), dated 29 June 1988, and Amendment 1, dated, 23 November are hereby reinstated and may be used for acquisition.

2,2 - METHYLENEBIS (4-METHYL-6-TERT-BUTYLPHENOL)

ARMY MIL-B-20467 A REINST NOTICE 3-1999 纸(用于弹药)

MIL-B-20467A(AR) dated 14 February 1974 is hereby reinstated and may be used for acquisition.

BOXBOARD (FOR USE IN AMMUNITION)