V10 航空、航天材料基础标准 标准查询与下载

ARMY MIL-H-502 B REINST NOTICE 3-1999 六亚甲基四胺技术

MiL-H-502B, dated 3 September 1982, and Interim Amendment 1, dated 20 March 1990, are hereby reinstated and may be used for acquisition

HEXAMETHYLENETETRAMINE, TECHNICAL

ARMY MIL-DTL-13080 E-1999 用于装甲的奥氏体钢奥氏体钢焊条焊接电极(19-9改良)

This specification covers austenitic steel arc welding electrodes for use on steels of high hardenability(see 6. i).

ELECTRODES, WELDING, COVERED: AUSTENITIC STEEL (19-9 MODIFIED) FOR ARMOR APPLICATIONS

ARMY MIL-HDBK-1461 A-1999 弹药制造商和他们的标号

This Military Handbook is approved for use by all departments and Agencies of the Department of Defense.

AMMUNITION MANUFACTURERS AND THEIR SYMBOLS

NAVY MIL-DTL-32040-1999 高能硝胺枪械推进剂

This specification covers high energy nitramine gun propellant, Ex-100, for use in the 5"/62 Mk 45 Mod 4 Gun Weapons System (see 6.1).

PROPELLANT, GUN, HIGH ENERGY NITRAMINE

ARMY A-A-59410-1999 DMDNB(2.3 -二甲基-2.3 -二硝)

Scope. This commercial item description covers reagent grade 2,3-dimethyl-2,3- dinitrobutane.

DMDNB (2,3-DIMETHYL-2,3-DINITROBUTANE)

DLA A-A-59304-1999 过氧化甲乙酮(催化剂) [代替:DLA MIL-P-87938 CANC 通告 1,DLA MIL-P-87938]

This commercial item description (CID) covers one type of methyl ethyl ketone peroxide compound to be used as a catalyst to harden polyester resin at room temperature. Typical applications include glass-reinforced plastic laminates and gel coats.

METHYL ETHYL KETONE PEROXIDE (CATALYST) [Superseded: DLA MIL-P-87938 CANC NOTICE 1, DLA MIL-P-87938]

ARMY MIL-F-48637 A (4)-1999 训练用M751信号弹特征子弹弹突起爆引信

This amendment forms a part of MIL-F-48637A(AR), dated 08 September 1992, and is approved for use by the U.S. Army Armament Research, Development and Engineering Center, and is available for use by all Departments and Agencies of the Department of Defense.

FUZE, POINT DETONATING, PRACTICE, M751 WITH PYROTECHNIC SIGNATURE CARTRIDGE

ASTM E1216-99 用胶带提取法对表面微粒子污染取样的标准规程

1.1 This practice provides a procedure for sampling surfaces to determine the presence of particulate contamination, 5 [mu]m and larger. The practice consists of the application of a pressure sensitive tape to the surface followed by the removal of particulate contamination with the removal of the tape. The tape with the adhering particles are then mounted on etched counting slides. Counting and measuring of particles is done by standard techniques. 1.2 This practice describes the materials and equipment required to perform sampling of surfaces for particle counting and sizing. 1.3 The criteria for acceptance or rejection of a part for conformance to surface cleanliness level requirements shall be determined by the user and are not included in this practice. 1.4 This practice is for use on surfaces that are not damaged by the application and removal of adhesive tape. The use of this practice on any surface of any material not previously tested or for which the susceptibility to damage is unknown is not recommended. In general, metals, metal platings, and oxide coatings will not be damaged. Application to painted, vapor deposited, and optical coatings should be evaluated prior to implementing this test. 1.5 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Sampling for Particulate Contamination by Tape Lift

ASTM E1216-99(2005) 用胶带提取法对表面微粒子污染取样的标准规程

1.1 This practice provides a procedure for sampling surfaces to determine the presence of particulate contamination, 5 [mu]m and larger. The practice consists of the application of a pressure sensitive tape to the surface followed by the removal of particulate contamination with the removal of the tape. The tape with the adhering particles are then mounted on etched counting slides. Counting and measuring of particles is done by standard techniques. 1.2 This practice describes the materials and equipment required to perform sampling of surfaces for particle counting and sizing. 1.3 The criteria for acceptance or rejection of a part for conformance to surface cleanliness level requirements shall be determined by the user and are not included in this practice. 1.4 This practice is for use on surfaces that are not damaged by the application and removal of adhesive tape. The use of this practice on any surface of any material not previously tested or for which the susceptibility to damage is unknown is not recommended. In general, metals, metal platings, and oxide coatings will not be damaged. Application to painted, vapor deposited, and optical coatings should be evaluated prior to implementing this test. 1.5 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Sampling for Particulate Contamination by Tape Lift

NAVY MIL-HDBK-1022 A-1999 石油燃料设备

PETROLEUM FUEL FACILITIES

PETROLEUM FUEL FACILITIES

AECMA PREN 4575-1999 航空航天系列.抗热合金FE-PA4901(X12CrNiCoMoW21-20)溶液处理和除污垢薄片3mm小于或等于a小于或等于50mm.P1版

This draft is issued to allow comments from interested parties; all comments will be given consideration prior to publication.

Aerospace Series Heat Resisting Alloy FE-PA4901 (X12CrNiCoMoW21-20) Solution Treated and Descaled Sheet and Plate 3 mm Less Than a Less Than or Equal to 50 mm Edition P1

AECMA PREN 4574-1999 航空航天系列.抗热合金FE-PA4901(X12CrNiCoMoW21-20)溶液处理锻造De小于或等于100mm.P1版

This standard specifies a method of checking the resistance of optical connection elements(including permanent connections) and fibre optic couplers to fluids and lubricants. It shall be used together with EN 2591.

Aerospace Series Heat Resisting Alloy FE-PA4901 (X12CrNiCoMoW21-20) Solution Treated and Precipitation Treated Forgings De Less Than or Equal to 100 mm Edition P1

AECMA PREN 4573-1999 航空航天系列.抗热合金FE-PA4901(X12CrNiCoMoW21-20)溶液处理和杆剖面De小于或等于100mm.P1版

This "Aerospace Series" Prestandard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industries). it is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Technical Committee following comment by the Member countries.

Aerospace Series Heat Resisting Alloy FE-PA4901 (X12CrNiCoMoW21-20) Solution Treated and Precipitation Treated Bar and Section De Less Than or Equal to 100 mm Edition P1

AECMA PREN 4572-1999 航空航天系列.抗热合金FE-PA4901(X12CrNiCoMoW21-20)溶液处理薄片和带a小于或等于3mm.P1版

This "Aerospace Series" Prestandard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industries). It is published on green paper for the needs of AECMAMembers. It has been technically approved by the experts of the concerned Technical Committee following comment by the Member countries.

Aerospace Series Heat Resisting Alloy FE-PA4901 (X12CrNiCoMoW21-20) Solution Treated Sheet and Strip a Less Than or Equal to 3 mm Edition P1

AECMA PREN 4571-1999 航空航天系列.抗热合金FE-PA4901(X12CrNiCoMoW21-20)溶液处理杆剖面直径D小于或等于100mm.P1版

This "Aerospace Series» pre-standard has been drawn up under the responsibility of AECMA (Association Européenne des Constructeurs de MatérielAérospatial). It is published on green paper for the needs ofAECMA-Members. It has been technically approvedby the experts of the concerned AECMA Commission following comment by the Member countries.

Aerospace Series Heat Resisting Alloy FE-PA4901 (X12CrNiCoMoW21-20) Solution Treated Bar and Section De Less Than or Equal to 100 mm Edition P1

AECMA PREN 4570-1999 航空航天系列.抗热合金FE-PA4901(X12CrNiCoMoW21-20)溶液处理锻造直径D小于或等于100mm.P1版

This "Aerospace Series" Presfandard has been drawn up under the responsibilify of AECMA-STAN (The European Association of Aerospace Industries - Standardization). It is published on green paper for the needs of the European Aerospace Industty. It has been technically approved by the experts of the concerned Domain following member comments.

Aerospace Series Heat Resisting Alloy FE-PA4901 (X12CrNiCoMoW21-20) Solution Treated Forgings De Less Than or Equal to 100 mm Edition P1

AECMA PREN 4569-1999 航空航天系列.抗热合金CO-PH4101(CoCr20W15Ni)真空熔化溶液处理电线直径D小于或等于4mm.P1版

This Yerospace Series" Presfandard has been drawn up under fhe responsibilify of AECMA-STAN (The European Associafion of Aerospace Indusfries - Sfandardizafion). If is published on green paper for fhe needs of fhe European Aerospace Indusfry. If has been fechnically approved by fhe experts of fhe concerned Domain following member commenfs.

Aerospace Series Heat Resisting Alloy CO-PH4101 (CoCr20W15Ni) Vacuum Melted Solution Treated Wire D Less Than or Equal to 4 mm Edition P1

AECMA PREN 4568-1999 航空航天系列.抗热合金CO-PH4101(CoCr20W15Ni)真空熔化溶液处理薄片和带小于或等于6mm.P1版

This standard specifies the characteristics of washers in heat and corrosion resisting steel intended for use in aircraft fluid system pipelines.

Aerospace Series Heat Resisting Alloy CO-PH4101 (CoCr20W15Ni) Vacuum Melted Solution Treated Sheet and Strip a Less Than or Equal to 6 mm Edition P1

AECMA PREN 4567-1999 航空航天系列.抗热合金CO-PH4101(CoCr20W15Ni)真空熔化溶液处理杆剖面直径D小于或等于100mm.P1版

This "Aerospace series" Standard has been drawn up under the responsibilit of AECMA.

Aerospace Series Heat Resisting Alloy CO-PH4101 (CoCr20W15Ni) Vacuum Melted solution Treated Bar and Section a or D Less Than or Equal to 100 mm Edition P1

AECMA PREN 4566-1999 航空航天系列.抗热合金CO-PH4101(CoCr20W15Ni)真空熔化处理De小于或等于100mm.P1版

This standard is initially published on green paper for the needs of AECMA-Members (Association Europeenne des Constructeurs de Matdriel Adrospatial). it has been technically approved by the experts of the concerned AECMA Commission following comment by the manufacturers of the Member countries.

Aerospace Series Heat Resisting Alloy CO-PH4101 (CoCr20W15Ni) Vacuum Melted Solution Treated Forgings De Less Than or Equal to 100 mm Edition P1