共找到 1400 条与 航空、航天材料基础标准 相关的标准,共 94 页
This handbook prescribes requirements for radiographic inspection for soundness of welds in steel by comparison to selective severity levels of ASTM E390, Volume II reference radiographs. The base material varies from greater that 0.25 to 3.0 in.(6.4 to 76 mm) inclusive in thickness. This handbook is not suitable for shipyard use. This handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the contractor does not have to comply.
RADIOGRAPHIC INSPECTION FOR SOUNDNESS OF WELDS IN STEEL BY COMPARSION TO GRADED ASTM E390 REFERENCE RADIOGRAPHS
This Amendment forms a part of MIL-F-46580C, dated 15 November 1973, and is approved for use by all Departments and Agencies of the Department of Defense.
FUZE, POINT DETONATION, M505A3
This amendment forms a part of MIL-C-63982A(AR), dated 26 August 1992, and is approved for use by the US Army Armament Research, Development and Engineering Center, and is available for use by all Departments and Agencies of the Department of Defense.
CARTRIDGE, 30MM HIGH EXPLOSIVE DUAL PURPOSE, M789
This amendment forms a part of MIL-C-46552C, dated 7 May 1976, and is approved for use by all Departments and Agencies of the Department of Defense.
CARTRIDGE, 20MM, TARGET PRACTICE, M55A2
This amendment forms a part of M?L-C-60609A, dated 20 April 1973, and is approved for use by all Departments and Agencies of the Department of Defense.
CARTRIDGE, 20MM, TARGET PRACTICE-TRACER, M220
This notice should be filed in fiont of MIL-G-48090(AR) dated 17 March 1988. MIL-G-48090(AR) dated 17 March 1988 is inactive for new design and is no longer used, except for replacement purposes.
GROMMETS, POLYCARBONATE (FOR SEPARATE LOADED PROJECTILE)
This CID covers the general requirements for anhydrous sodium sulfate used for the manufacturing of propellants used in ammunition.
SODIUM SULFATE, ANHYDROUS, TECHNICAL (FOR AMMUNITION USE) [Superseded: ARMY MIL-S-50004 A CANC NOTICE 2, ARMY MIL-S-50004 A VALID NOTICE 1, ARMY MIL-S-50004 A, ARMY MIL-S-50004]
This amendment forms a part of Military Specification MIL-G-63343(AR), dated 11 July 1980, and is approved for use by the U.S . Army Armament Research, Development and Engineering Center, and is available for use by all Departments and Agencies of the Department of Defense.
GRENADE, M74, HEMISPHERES FOR
This specification covers requirements for the acquisition of two types and two classes of material that will remove or loosen carbon from components of internal combustion engines and compressor sections of jet engines.
Carbon Removing Compound (for Use in Agitated Tank)
This specification covers the requirements for surface metal removal of ferrous and non-ferrous meatls by milling processes using controlled immersion of parts in chemical ethcing solutions.
Chemical Milling of Metals, Specification for
This amendment forms a part of Military Specification MIL-T-26398D(USAF) dated 7 February 1967.
DINITROTOLUENE, (FOR USE IN EXPLOSIVES)
The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.
TOW TARGET, AERIAL DART, GUNNERY TYPE TDU-10/B AND TDU-10B/B
MIL-C-63338A(AR) dated 18 August 1983 with Amendment 1, dated 31 January 1986 is hereby reinstated and may be used for acquisition
CARTRIDGE, 25.4MM, DECOY, M839
This notice should be filed in fiont of MIL-C-63338A(AR) dated 18 August 1983 MIL-C-63338A(AR) dated 18 August 1983 with Amendment 1, dated 31 January 1986 is inactive for new design and no longer used except for replacement purposes.
CARTRIDGE, 25.4MM, DECOY, M839
The General Services Administration has authorized the use of this Commercial Item Description(CID) as a replacement of MIL-B-20390 for all federal agencies.
PAPERBOARD, AMMUNITION CONTAINER
This notice should be filed in front of MIL-F-50542A(AR) dated 14 June 1978
FUZE FOR FLECHETTE WARHEAD, WDU-4A/A WITH EXPULSION CHARGE
This notice should be filed in front of MIL-F-50541 A(AR) dated 8 September 1978
FUZE FOR FLECHETTE WARHEAD, WDU-4A/A (LESS EXPULSION CHARGE)
This specification identifies the requirements for qualification and production control of track systems supporting U.S. Military Tracked Vehicles. This specification is intended primarily for the qualification of elastomeric compounds used in the fabrication of track and track components and to ensure that the quality and performance established at qualification is maintained throughout production. The contractor is held fully responsible for the entire assembly/component including all non-elastomeric components and fasteners. The qualified products list(QPL) is divided by individual track components(pads, bushings and roadwheel path/shoe body) listing the contractors qualified to produce the various components,
TRACK SHOE SETS, TRACK SHOE ASSEMBLIES, TRACK SHOE PADS AND TRACK SHOE BUSHINGS, VEHICULAR: ELASTOMERIZED
This specification covers the general requirement for a synthetic hydrocarbon base hydraulic fluid for use from -40°C to 290°C.
HYDRAULIC FLUID, FIRE RESISTANT, HYDROGENATED POLYALPHAOLEFIN BASE, HIGH TEMPERATURE, FLIGHT VEHICLE, METRIC
This notice should be filed in fiont of MIL-T-62356(AT), dated 15 April 1983.
TRAINER, TURRET: IMPROVED TOW VEHICLE
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号