V15 复合材料与固体燃料 标准查询与下载

AECMA PREN 3113-1999 航空航天系列六角标准高度线性钛合金涂层900MPa/315℃

This "Aerospace Series" Prestandard has been drawn up under the responsibility of AECMA

Aerospace Series Screws, Hexagonal Normal Head, Fully Threaded, in Titanium Alloy Anodized Classification: 900 MPa/315 Degrees C Edition P 2; Withdrawn - Not Replaced

DLA AN3362 REV 6-1999 II类别 0级 密封的2PDT 100AMP 延时

Dimensions are in inches. Metric equivalents are given for general information only.3. Unless otherwise specified, tolerance is+.01O.

RELAY, 100 AMP, 2PST, UNSEALED, CLASS O, TYPE II

ARMY MIL-S-11388 D REINST NOTICE 2-1999 金属集装箱接缝的密封材料

This commercial item description covers brown kraft paper used for general wrapping applications.

SEALING MATERIAL FOR METAL CONTAINER SEAMS

AECMA PREN 4603-1999 航空航天系列.钼二硫化物扣件涂层技术规范.P1版

This .Aerospace Series» pre-standard has been drawn up under the responsibility of AECMA (Association Européenne des Constructeurs de Matériel Aérospatial). It is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned AECMA Commission following comment by the Member countries.

Aerospace Series Molybdenum Disulphide Coatings of Fasteners Technical Specification Edition P 1

ARMY A-A-59339-1998 硝酸盐

The General Services Administration has authorized the use of this commercial item description, for all federal agencies.

GUANIDINE NITRATE

NAVY MIL-P-85856 NOTICE 2-1998 等离子喷涂涂层火焰粉体材料的通用规范[参见海军A-A-59315]

The associated specification sheets as specified below for MIL-P-85856 are hereby inactivated for new design. Future design should refert o theC ommercial Item Description Sheets as specified below

POWDER MATERIALS FOR FLAME AND PLASMA SPRAYED COATINGS, GENERAL SPECIFICATION FOR [Refer To: NAVY A-A-59315]

AECMA PREN 3095-1998 航空航天系列密封剂 试验方法 延长装配时间的确定

For the use of this standard, see EN 2500-5.

Aerospace Series Sealants Test Method Determination of Extended Assembly Time Edition P 1

AECMA PREN 2902-1998 航空航天系列P类系列夹子和环橡胶缓冲器铝合金尺寸--质量.P2版

This “Aerospace Series» pre-standard has been drawn up under the responsibility of AECMA {Association Européenne des Constructeurs de Matériel Aérospatial). It is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Commission following comment by the Member countries.

Aerospace Series Clamps, Loop (<

> Type) with Rubber Cushioning in Aluminium Alloy Dimensions - Masses Issue P 1 [Refer To: ASD-STAN PREN 4114]

AECMA PREN 2901-1998 航空航天系列P类系列夹子和环橡胶缓冲器防腐钢尺寸--质量.P2版

This standard specifies the required characteristics of loop type clamps in cor rosion resisting steel with various cusliioni ng ma terials. Clamps to this standard are used for supporting aerospace pipe assemblies aiid electrical cables. For temperature range and environmental considerations see the various material standards.

Aerospace Series Clamps, Loop (<

> Type) with Rubber Cushioning in Corrosion Resisting Steel Dimensions - Masses Issue P 2 [Refer To: ASD-STAN PREN 4113]

AECMA PREN 4426-1998 航空航天系列.防止试验方法传导性和水提物PH值

This draft is issued to allow comments from interested parties; all comments will be given consideration prior to publication.

Aerospace Series Textiles Test Method Determination of Conductivity and pH of Aqueous Extracts

AECMA PREN 2437-1998 航空航天系列.铝和铝合金铬转化涂层.第1版

This "Aerospace series" Standard has been drawn up under the responsibility of AECMA (The European Asso cia tion of Aerospace In dus tries). It is published on yellow paper in three equivalent versions (English, French, German). It will be submitted as a draft European Standard to CEN (European Committee for Standardization) for formal vote.

Aerospace Series Chromate Conversion Coatings (Yellow) for Aluminium and Aluminium Alloys Edition 1

ARMY A-A-59317-1998 干燥粉状碳黑

The General Services Administration has authorized the

CARBON BLACK, POWDERED, DRY

HB 7618-1998 聚合物基复合材料力学性能数据表达准则

本标准规定了聚合物基复合材料单层级和层合板级力学性能表达的内容、数据处理与表达方式。 　　本标准适用于评判聚合物基复合材料的力学性能数据，确定各种性能（如供设计用的各种材料数据手册、汇编和专题技术报告等）的最低数据要求和分析处理方法。

Data expression guidelines for mechanical properties of polymer matrix composites

HB 7617-1998 纤维增强金属基复合材料层板弯曲性能试验方法

Test method for flexural properties of fiber reinforced metal matrix composite laminates

HB 7616-1998 纤维增强金属基复合材料层板拉伸性能试验方法

本标准规定了单向（０°）长纤维增强金属基复合材料层板拉伸性能试验的试样、试验条件、试验设备、试验步骤和试验结果处理。 　　本标准适用于室温～４００℃范围内，测定单向（０°）长纤维增强金属基复合材料层板的抗拉强度、拉伸杨氏模量、条件切线模量、泊松比和应力－应变曲线。

Test method for tensile properties of fiber reinforced metal matrix composite laminates

HB 7615-1998 复合材料树脂基体组分和预固化度高效液相色谱分析方法

本标准规定了复合材料树脂基体高效液相色谱分析方法的原理、试剂、仪器、试验条件、试验过程、试验结果计算和试验报告。 　　本标准适用于树脂基复合材料中可溶于乙腈的基体的配方组成鉴别及组分定量分析和预固化度分析。

High performance liquid chromatographic analysis method for composite resin matrix components and pre-curing degree

HB 7614-1998 复合材料树脂基体固化度的差示扫描量热法（DSC）试验方法

本标准规定了复合材料树脂基体固化度的差示扫描量热法（ＤＳＣ）试验方法的试验设备、试样、试验步骤、试验结果及试验报告等。 　　本标准适用于热固性复合材料树脂基体固化度的测定。也可用于其它热固性聚合物的固化度的测定。

Differential Scanning Calorimetry (DSC) Test Method for Degree of Curing of Composite Resin Matrix

DLA A-A-59160-1998 工业无水亚硫酸钠

This commercial item description (CID) covers technical grade anhydrous sodiumsuKite for use as an oxygen scavenger in boiler water treatment operations.

SODIUM SULFITE, ANHYDROUS, TECHNICAL

ARMY MIL-PRF-64154 A-1998 碾压:玻璃丝纤维增强石碳酸

This specification is approved for use by all Departments and Agencies of the

LAMINATE: FIBERGLASS-FABRIC-REINFORCED, PHENOLIC

DLA A-A-59211-1998 安全台零件洗涤罐 取代NAVY RR-P-125 B CANC NOTICE 1,NAVY RR-P-125 B VALID NOTICE 1,NAVY RR-P-125 B,NAVY RR-P-125 A

This commercial item description (CID) covers bench-type safety cans for containing flammable or solvent liquids used in the cleaning or swabbing of small parts.

PARTS CLEANING CAN, SAFETY, BENCH [Superseded: NAVY RR-P-125 B CANC NOTICE 1, NAVY RR-P-125 B VALID NOTICE 1, NAVY RR-P-125 B, NAVY RR-P-125 A]