V15 复合材料与固体燃料 标准查询与下载

AECMA PREN 2635-1998 航空航天系列.2014A-T6511对粗晶粒边缘区有控制的挤压棒材和型材 a或1,2mm小于或等于直径D小于或等于200 mm

This standard specifies a method of assessing the deformation and appearance of the contact after crimping. It shall be used together with EN 2591.

Aerospace Series Aluminium Alloy AL-P2014A T6511 Extruded Bar and Section a or D Less Than or Equal to 200 mm with Peripheral Coarse Grain Control Edition P 1

ARMY MIL-C-440 C (1)-1998 A-3和A-4型炸药

This amendment formas part of Military Specification MIL-C- 440C, dated 25 November 1974, and is approved for use by all Departments and Agencieosf the Departmentof Defense.

COMPOSITIONS A-3 AND A-4

ARMY MIL-C-45010 A (6)-1998 C-4溶注炸药

This Amendment forms a part of Military Specification MIL-C- 45010A(Mu), dated 26 Sept. 1963, and is approved for use by all Departments and Agencies of the Department of Defense.

COMPOSITION C-4

AECMA PREN 3615-1998 航空航天系列.纤维增强塑料　暴露于潮湿环境和水分吸收条件的测定

This "Aerospace Series '' Prestandard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industries). It is published on green paper for the needs of AECMA-Members. it has been technically approved by the experts of the concerned Technical Committee fallo wing comment by the Member countries.

Aerospace Series Fibre Reinforced Plastics Determination of the Conditions of Exposure to Humid Atmosphere and of Moisture Absorption Edition P 2

HB 7491-1997 军用飞机复合材料结构强度验证要求

本标准规定了军用飞机复合材料结构完整性所必备的强度、刚度、耐久性与损伤容限的验证要求及其验证方法。 　　本标准适用于有固定机翼或可变后掠机翼的动力驱动有人驾驶军用飞机复合材料结构的订购、设计和验证；也适用于有人驾驶的军用直升机和垂直/短矩起落飞机上有类似结构特性的复合材料结构的订购、设计和验证。

Requirements for Strength Verification of Military Aircraft Composite Structures

HB/Z 306-1997 复合材料成型工艺组合

本标准规定了复合材料成型工艺组合的环境、材料、工装模具与工量具、工艺过程等。 　　本标准适用于复合材料制品的热压罐成型、真空袋成型和热膨胀模成型。

Composite molding process combination

HB/Z 305-1997 复合材料热压罐成型工艺

本标准规定了复合材料热压罐成型工艺的环境、设备、工艺参数和固化模式、工艺过程等。 　　本标准适用于复合材料制品的热压罐成型。

Composite autoclave molding process

HB/Z 304-1997 民机复合材料地板制造工艺

本标准规定了具有阻燃特性的环氧树脂预浸渍玻璃纤维面层、Ｎｏｍｅｘ蜂窝芯夹层结构地板的分类、材料、设备与模具、环境人员及文件、工艺过程、安全与卫生等。 　　本标准适用于民用飞机复合材料夹层结构地板的制造。军用飞机复合材料地板的制造，可参照执行。

Manufacture Process of Civil Aircraft Composite Material Floor

DLA A-A-59121-1997 工业草酸二水合物

This commercial item description (CID) covers two classes of technical grade oxalic acid dihydrate.

OXALIC ACID, DIHYDRATE, TECHNICAL

AIR FORCE MS22004 REV C NOTICE 1-1997 飞机安全带系带调节器

This notice should be filed in front of MS22004 REV C, dated 03 July 1986.

ADJUSTER, LAP, AIRCRAFT SAFETY BELT

AIR FORCE MS22007 REV K NOTICE 1-1997 安全肩带调节器组装

This notice should be filed in fiont of MS22007 REV K, dated 15 July 1987. MS22007 REV K is inactive for new design and is no longer used, except for replacement purposes.

ADJUSTER ASSEMBLY, SAFETY SHOULDER HARNESS

ARMY MIL-D-63303 B NOTICE 1-1997 M128型矿山地面炸药车辆

This notice should be filed in front of MIL-D-63303B(AR) dated 7 April 1988 MIL-D-63303B(AR) dated 7 April 1988 is inactive for new design and no longer used except for replacement purposes.Preparing Activity: Army - AR AMSC NIA FSC 1095 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.Provided by HIS No reproduction or networking permitted without license from HIS Not for Resale.

DISPENSER, MINE, GROUND VEHICLE, M128

ARMY MIL-S-63326 NOTICE 1-1997 BLU-91/B和BLU-92/B型地雷的安全和武装装配

This notice should be filed in front of MIL-S-63326(AR) dated 11 August 1981 MIL-S-63326(AR) dated 11 August 1981 with Amendment 6, dated 27 March 1994 is inactive for new design and no longer used except for replacement purposes.

SAFETY AND ARMING ASSEMBLIES FOR MINES: BLU-91/B AND BLU-92/B

AECMA PREN 3106-1997 航空航天系列对剥皮的抵抗密封试验方法

This d r a i~s issued to allow comments from interested parties; all comments will be given consideration prior to

Aerospace Series Sealants, Test Methods Determination of Loss of Mass and Flexibility After Fluid Immersion

ARMY ADS-13 F-HDBK-1997 航空器的材料及制程

This ADS handbook embodies the general guidelines of the Army Aviation and Troop Command(ATCOM) for the materials and processes utilized in the design and construction of Army aircraft. It is for guidance only and cannot be cited as a requirement. If it is so cited, the contractor does not have to comply.

AIR VEHICLE MATERIALS AND PROCESSES

DLA MS35794 REV A NOTICE 1-1997 拼合式单片钢背双金属材料轴承套

This notice should be filed in front of MS35794A dated 03-NOV-72. Mc35794A is inactive for new design and is no longer used except for replacement purposes.

BEARING, SLEEVE, STEEL-BACKED BIMETAL, SPLIT TYPE, ONE PIECE

AIR FORCE MIL-B-87167 REINST NOTICE 2-1997 HBU-12/A飞机安全皮带

MIL-B-87167 (üSAF), dated 16 December 1985, is hereby reinstated and may be used for acquisition

BELT, AIRCRAFT SAFETY, HBU-12/A

DLA MIL-W-2902 D NOTICE 1-1997 氧气呼吸器安全绳索单相钢缆组装

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

WIRE ROPE ASSEMBLIES, SINGLE LEG, OXYGEN BREATHING APPARATUS SAFETY LINE

ARMY A-A-52522 B-1997 公制汽车制动衬砌制动及被覆材料

This CID covers automotive brake lining sets and brake lining material used in commercial and military vehicles

LINING BRAKE, AND LINING MATERIAL, BRAKE: AUTOMOTIVE (METRIC)

GSA A-A-3097-1997 无溶剂快速室温固化腈基丙烯酸酯粘合剂

ADHESIVES, CYANOACRYLATE, RAPID ROOM TEMPERATURE-CURING, SOLVENTLESS

ADHESIVES, CYANOACRYLATE, RAPID ROOM TEMPERATURE-CURING, SOLVENTLESS