V37 操纵系统及其附件 标准查询与下载

DLA MIL-STD-1792 CONT. DIST.-1985 航空器机械固定系统

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

FASTENING SYSTEMS, MECHANICAL, AIR VEHICLE

ISO 2020:1984 航空航天.机械系统的零件.飞机控制装置的预成形可弯曲钢丝绳.技术规范

Aerospace; Mechanical system parts; Preformed flexible steel wire rope for aircraft controls; Technical specification

NAVY MIL-C-24629-1984 综合语音通信系统

This specification establishes the performance, design, and test requirements for a computer-controlled

COMMUNICATIONS SYSTEMS INTEGRATED VOICE

NAVY MIL-HDBK-276-2-1984 生活周期模式防御物料系统操作说明书

This Life scie Cost Model for Defense Materiel Systems (Model) is the fifth in a series of engineering cost models developed in response to a Marine Corps requirement for a life cycle cost model which can be used in joint Service acquisition programs to insure that each Service's life cycle costs be considered. The current Model described by this handbook reflects continuing participation by analysts from all Services and industry to develop a model which is equally appropriate and convenient for all analysts and decision makers who must prepare or use life cycle cost estimates

LIFE CYCLE COST MODEL FOR DEFENSE MATERIEL SYSTEMS OPERATING INSTRUCTIONS

NAVY MIL-HDBK-276-1-1984 生活周期模式防御物料系统数据收集业务手册

The Marine Corps Life scie Cost Model for Defense Materiel Systems is the fifth in a series of engineering cost models developed in response to a Marine Corps requirement for a life cycle cost model which can be used in joint Service acquisition programs to insure that each Service's life cycle costs be considered. The current model described by this handbook reflects continuing participation by analysts from all Services and industry to develop a model which is equally appropriate and convenient for all analysts and decision makers who must prepare or use life cycle cost estimates.

LIFE CYCLE COST MODEL FOR DEFENSE MATERIEL SYSTEMS DATA COLLECTION WORKBOOK

NAVY MIL-S-17000 N SUPP 1-1983 一般规格的火灾控制及内部沟通指挥和控制,作战系统切换装备

This Supplement forms a part of Military Specification MIL-S-l7000N, dated 2 May 1983.

SWITCHING EQUIPMENT, COMBAT SYSTEM, COMMAND AND CONTROL, FIRE CONTROL, AND INTERIOR COMMUNICATION GENERAL SPECIFICATION FOR

NAVY MIL-S-17000 N-1983 一般规格的火灾控制及内部沟通指挥和控制,作战系统切换装备

SWITCHING EQUIPMENT, COMBAT SYSTEM, COMMAND AND CONTROL, FIRE CONTROL, AND INTERIOR COMMUNICATION GENERAL SPECIFICATION FOR

SWITCHING EQUIPMENT, COMBAT SYSTEM, COMMAND AND CONTROL, FIRE CONTROL, AND INTERIOR COMMUNICATION GENERAL SPECIFICATION FOR

NAVY DOD-STD-1399-441-1982 区域441精确时间和时间间隔船舷系统端口标准

This military standard i s approved for use by the Department of the Navy and is available for use by all Departments and Agencies of the Department of Defense.

INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 441 PRECISE TIME AND TIME INTERVAL (PTTI)

NAVY MIL-M-29399-1982 7201模型着陆人员地雷清除系统工具(LVTP7A1)

This specification establishes the requirements for the LVTP7A1 Mine Clearance System Kit (MCSK), exclusive of line charge containers, rocket motors, and ordnance material .

MINE CLEARANCE SYSTEM KIT (MCSK) FOR LANDING VEHICLE TRACKED PERSONNEL, MODEL 7201 (LVTP7A1)

BS 2G 132:1981 飞行器用电磁操纵的接触器的一般要求规范

This British Standard specifies the requirements for single and three-pole electromagnetically operated contactors, in the range 25 A to 600 A for use in nominal 28 V d.c. and 115/200 V three-phase 400 Hz a.c. systems in aircraft. Two environmental classes and two enclosure categories are specified as follows. Environmental classes Class 1. Contactors suitable for high altitude and wide temperature conditions. Class 2. Contactors suitable for lower altitudes and narrower temperature conditions. Enclosure categories Category A. Hermetically sealed contactors. Category B. Non-hermetically sealed contactors.

Specification for general requirements for electromagnetically operated contactors for aircraft

DIN ISO 44:1980 航空和航天.拉杆操纵的双位ON/OFF开关.操纵方向

Aerospace; lever-operated, two-position, ON/OFF switches, directions of operation

NAVY MIL-STD-2102 A-1980 机组人员逃生推进系统颤动及震动测试

This standard establishes vibration and shock tests of aircrew escape propulsion systems (AEPS) to determine if the systems are constructed to withstand dynamic vibration and shock stresses expected during service use, handling, and transportation.

AIRCREW ESCAPE PROPULSION SYSTEMS, VIBRATION AND SHOCK TESTS FOR

ISO 268:1980 航空器 机械的和电动机械的指示器 一般要求

States the requirements which are generally applicable. Is to be read in conjunction with specifications for individual indicators. An indicator is regarded as a unit primarily concerned with the visual display of information. The size and type of the finished indicator case shall be declared by the manufacturer in sufficient detail to facilitate subsequent installation.

Aircraft; Mechanical and electromechanical indicators; General requirements

ARMY MIL-F-47299 A-1980 用于2.75英寸火箭系统的空中运输火箭筒易碎整流片

This specification covers the requirements for one type of electronic pulse generator, designated as Generator, Pulse SG45/ MPQ-25.

FAIRING, FRANGIBLE, AIRBORNE ROCKET LAUNCHER FOR 2.75 INCH ROCKET SYSTEM

NAVY DOD-STD-1399-070 PT 1-1979 船舷系统区域070(部分1D.C.-磁化环境)端口标准

This Military Standard iB approved for use by all interested commands of the Department of the Navy i.nthe technical development plame.

INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 070 - PART 1 D.C. MAGNETIC FIELD ENVIRONMENT (METRIC)

NAVY MIL-STD-1661-1978 MARK及MOD命名系统

This standard sets forth procedures for establishing and changing item names and designations of systems, equiplnents and material items under the cognizance of the Naval Sea Systems Cornnand and, when officially requested, systems, equipments and material item under the cognizance of the Naval A i r Systems Cormrand. This standard defines the FlARK and MOD system of nomenclature and gives instructions for processing requests for assignment of nomenclature.

MARK AND MOD NOMENCLATURE SYSTEM

NAVY MIL-STD-1399-593 PART 1-1978 船舷系统区域593(部分1-水面舰艇污水处理)端口标准

This Military Standard is approved for use by tho Departmont of the Navy,and is available for UBQ by all Dapartments andAgencias of the Dspart.

INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 593 - PART 1 SEWAGE/WASTE WATER DISPOSAL FOR SURFACE SHIPS

NAVY MIL-STD-1399-593 PART 2-1978 船舷系统区域593(部分2-潜水艇污水处理)端口标准

This Military Standard is approved for use by the Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.

INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 593 - PART 2 SEWAGE/WASTE WATER DISPOSAL FOR SUBMARINES

NF L65-211:1978 控制箱.控制装置的尺寸和原理

Control boxes. Dimensions and principles governing installation.

NAVY DOD-STD-1399-304-1978 区域304电缆和插件的船舷系统端口标准

This Military Standard is approved for use by the Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense

INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 304 ELECTRICAL CABLES AND CONNECTORS