共找到 426 条与 工具 相关的标准,共 29 页
本标准适用于加工轻合金零件上的有垂直度,位置度和同轴度要求的通孔和不通孔普通螺纹(GB 192~193-1981,GB 196~197-1981)带后引导的机、手用丝锥。
Long shank machine, hand screw tap with rear leading part for regular screw thread of dead hole in machining light alloy d=12~36mm
本标准适用于加工轻合金零件上的有垂直度,位置度和同轴度要求的通孔和不通孔普通螺纹(GB 192~193-1981,GB 196~197-1981)带后引导的机、手用丝锥。
Short shank machine, hand screw tap with rear leading part for regular screw thread of through hole in machining light alloy d=3~3.5mm
本标准适用于加工轻合金零件上的有垂直度,位置度和同轴度要求的通孔和不通孔普通螺纹(GB 192~193-1981,GB 196~197-1981)带后引导的机、手用丝锥。
Short shank machine, hand screw tap with rear leading part for regular screw thread of through hole in machining light alloy d=4~ 5mm
本标准适用于加工轻合金零件上的有垂直度,位置度和同轴度要求的通孔和不通孔普通螺纹(GB 192~193-1981,GB 196~197-1981)带后引导的机、手用丝锥。
Short shank machine, hand screw tap with rear leading part for regular screw thread of through hole in machining light alloy d=6~11mm
本标准适用于加工轻合金零件上的有垂直度,位置度和同轴度要求的通孔和不通孔普通螺纹(GB 192~193-1981,GB 196~197-1981)带后引导的机、手用丝锥。
Short shank machine, hand screw tap with rear leading part for regular screw thread of through hole in machining light alloy d=12~36mm
本标准适用于加工轻合金零件上的有垂直度,位置度和同轴度要求的通孔和不通孔普通螺纹(GB 192~193-1981,GB 196~197-1981)带后引导的机、手用丝锥。
Long shank machine, hand screw tap with rear leading part for regular screw thread of through hole in machining light alloy d=3~3.5mm
本标准适用于加工轻合金零件上的有垂直度,位置度和同轴度要求的通孔和不通孔普通螺纹(GB 192~193-1981,GB 196~197-1981)带后引导的机、手用丝锥。
Long shank machine, hand screw tap with rear leading part for regular screw thread of through hole in machining light alloy d=4~ 5mm
本标准适用于加工轻合金零件上的有垂直度,位置度和同轴度要求的通孔和不通孔普通螺纹(GB 192~193-1981,GB 196~197-1981)带后引导的机、手用丝锥。
Long shank machine, hand screw tap with rear leading part for regular screw thread of through hole in machining light alloy d=6~11mm
本标准适用于加工轻合金零件上的有垂直度,位置度和同轴度要求的通孔和不通孔普通螺纹(GB 192~193-1981,GB 196~197-1981)带后引导的机、手用丝锥。
Long shank machine, hand screw tap with rear leading part for regular screw thread of through hole in machining light alloy d=12~36mm
本标准适用于加工轻合金零件上的有垂直度,位置度和同轴度要求的通孔和不通孔普通螺纹(GB 192~193-1981,GB 196~197-1981)带后引导的机、手用丝锥。
Short shank machine, hand screw tap with rear leading part for regular screw thread of dead hole in machining light alloy d=3~3.5mm
Spacers to this standard shall be applied between pipe mountings supports in cases where an additional fastening between pipes in necessary or where the usual pipe supports cannot be mounted. Spacers shall prevent damages due to vibration.
Aerospace; spacer for tube assemblies
Bush used for quick change bit holder
Tubular rivet expander (for GB 975-76)
Specifications for riveting assembly tools
Conical flat cornbread for hand (d=8~11)
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号