Y17 缝纫机 标准查询与下载
共找到 432 条与 缝纫机 相关的标准，共 29 页
本标准规定了计算机控制高速曲折缝缝纫机的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于计算机控制高速曲折缝缝纫机（以下简称“产品”）。
Industrial sewing machine.Computer controlled high-speed zigzag sewing machine
- ICS
- 61.080
- CCS
- Y17
- 发布
- 2012-05-24
- 实施
- 2012-11-01
本标准规定了平板式链式线迹缝纫机机头的产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存和产品说明书。 本标准适用于平板式链式线迹缝纫机机头（以下简称为机头）。
Industrial sewing machine.Flat bed cover stitch sewing machine head
- ICS
- 61.080
- CCS
- Y17
- 发布
- 2012-05-24
- 实施
- 2012-11-01
本标准规定了缝纫机紧固螺钉和相关零件螺纹连接的术语和定义及符号、基本要求、主要关系式以及锁紧力的试验原理和方法。 本标准适用于缝纫机专用紧固螺栓、螺钉和螺母。 本标准不适用于带弹簧垫圈、弹性垫圈的螺纹连接和使用。
Testing method of locking force for fastening piece of sewing machine
- ICS
- 61.080
- CCS
- Y17
- 发布
- 2012-05-24
- 实施
- 2012-11-01
本标准规定了直线缝锁式线迹缝纫机机头的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于家庭使用、形成直线缝锁式线迹的缝纫机机头。
Household sewing machine.Straight lock stitch sewing machine head
- ICS
- 61.080
- CCS
- Y17
- 发布
- 2011-06-15
- 实施
- 2011-10-01
本标准规定了家用缝纫机机针的要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于家用缝纫机机针。
Needles for household sewing machines
- ICS
- 61.080
- CCS
- Y17
- 发布
- 2011-06-15
- 实施
- 2011-10-01
本标准规定了工业用缝纫机计算机控制多头绗绣机的术语和定义、产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于在夹层纺织物上缝制锁式线迹的工业用缝纫机计算机控制多头绗绣机。
Industrial sewing machine.Computerized controlled multi-head quilting embroidery machine
- ICS
- 61.080
- CCS
- Y17
- 发布
- 2011-06-15
- 实施
- 2011-10-01
本标准规定了工业用缝纫机计算机控制链式线迹刺绣机的术语和定义、产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于缝制链式线迹的工业用缝纫机计算机控制刺绣机。
Industrial sewing machine.Computerized controlled chain stitch embroidery machine
- ICS
- 61.080
- CCS
- Y17
- 发布
- 2011-06-15
- 实施
- 2011-10-01
本标准规定了工业用缝纫机计算机控制混合刺绣机的术语和定义、分类、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于锁式、链式两种线迹组合或在上述任一种线迹中增加各种装置形成两种以上装饰功能的计算机控制刺绣机。
Industrial sewing machine.Computerized controlled multi-functions embroidery machine
- ICS
- 61.080
- CCS
- Y17
- 发布
- 2011-06-15
- 实施
- 2011-10-01
本标准规定了缝纫机零件图样上未注形状和位置公差。 本标准适用于缝纫机零件加工，图样采用GB/T 4249-2009的形位公差各项目被测要素的未注形位公差。
Sewing machine parts.Not note geometric and position tolerance
- ICS
- 61.080
- CCS
- Y17
- 发布
- 2011-06-15
- 实施
- 2011-10-01
本标准规定了缝纫机零件图样上未注公差的线性尺寸、角度尺寸和零件组装后再经机械加工形成的线性或角度尺寸的极限偏差。 本标准适用于缝纫机零件切削加工的尺寸，也适用于非切削加工的尺寸。
Sewing machine parts.Size limit of not note tolerances
- ICS
- 61.080
- CCS
- Y17
- 发布
- 2011-06-15
- 实施
- 2011-10-01
本标准规定了缝纫机专用紧固螺栓、螺钉的产品分类、基本牙型、公差、表面质量、机械或物理性能和产品的标志、包装、运输。 本标准适用于缝纫机专用紧固螺栓、螺钉。
Sewing machine general requirements for spiral.Purpose fasten belt and screw
- ICS
- 61.080
- CCS
- Y17
- 发布
- 2011-06-15
- 实施
- 2011-10-01
本标准规定了工业用缝纫机刺绣机旋梭的要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于工业用缝纫机计算机控制刺绣机使用的旋梭。
Industrial sewing machine.Rotary hook for embroidery machine
- ICS
- 61.080
- CCS
- Y17
- 发布
- 2011-06-15
- 实施
- 2011-10-01
本标准规定了工业用缝纫机高速平缝机主轴的定义、产品分类、要求、试验方法、检验规则和标志、包装、运输、储存。 本标准适用于对各类高速平缝机主轴，高速双针平缝机、高速曲折缝缝纫机、链式平缝机等机种的主轴也可参照使用。
Industrial sewing machine.General requirements for main shaft.Part 1: High speed lockstitch sewing machine main shaft
- ICS
- 61.080
- CCS
- Y17
- 发布
- 2011-06-15
- 实施
- 2011-10-01
Adds requirements for garment finishing machines employing ionization technology.
Garment Finishing Appliances
- ICS
- 59.120.50
- CCS
- Y17
- 发布
- 2011
- 实施
1.1 This terminology covers basic stitches made by sewing machines designed for home use and provides a uniform, easily understood language for the definitions and descriptions of seams and seam finishes used in home sewing. 1.1.1 These terms and definitions are not necessarily consisten with those used in the apparel or home furnishings manufacturing industries. 1.1.1.1 This terminology provides a common base for use in the preparation of educational materials and pattern guide sheets for home sewing. 1.1.1.2 Each stitch is identified with a definition, a discussion of how the stitch is formed and might be used and an illustration of one or more possible stitch patterns. This terminology does not include stitches made by sergers, hemmers, or by attachments to the home sewing machines. 1.1.1.3 These seams and seam finishes may be produced on a conventional sewing machine or by hand. 1.1.1.4 Other seam types or finishes may be more appropriate if equipment other than the conventional sewing machine is available. 1.1.1.5 Section 3, Terminology, is categorized into two subsections, specific to the two areas of specialization under this document: Relating to Seams and Relating to Stitches. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Terminology of Basic Sewing Machine Stitches for Home Use
- ICS
- 01.040.61;61.080
- CCS
- Y17
- 发布
- 2011
- 实施
This practice is intended to allow marker data exchange between nesting software or CAM systems. The pieces description, exported by a CAD system, is dedicated to CAM systems.1.1 This practice describes a format for transferring marker data from a CAD marker software system to another or to a CAM software system. 1.2 This practice does not support curve interpolation or definitions. All curves are represented by discrete vectors and are dependent on the resolution of the CAD software. 1.3 This practice is concerned in limiting differences when processing the same data on different CAD systems. 1.4 This practice is not intended to represent the dimension relationships between pattern pieces or between pattern sizes, or the correspondence between 2D or 3D sewn product pattern piece geometries. 1.5 The file format for the marker data exchange file defined by this standard complies with the XML format. 1.5.1 The XML schema describing marker data exchange standard XML structure is presented in an ASTM adjunct. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Practice for Sewn Products Marker Data Interchange
- ICS
- 35.240.10
- CCS
- Y17
- 发布
- 2011
- 实施
本标准规定了工业用缝纫机平缝机电磁铁的术语和定义、产品分类、要求、试验方法和检验规则、标志、包装、运输、贮存。 本标准适用于工业用缝纫机平缝机电磁铁。
Industrial sewing machine.Technical condition of lockstitch sewing machine electromagnet
- ICS
- 61.080
- CCS
- Y17
- 发布
- 2010-11-22
- 实施
- 2011-03-01
本标准规定了自动控制蒸汽熨烫机的工作环境、术语和定义、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于服装或洗涤业的压烫或吹烫系列自动控制蒸汽熨烫机。
Auto control steam pressing machine
- ICS
- 61.080
- CCS
- Y17
- 发布
- 2010-11-22
- 实施
- 2011-03-01
本标准规定了工业用缝纫机高速绷缝缝纫机机头的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于形成400类或600类线迹的平台式、悬筒式及肘形筒式等形式的高速绷缝缝纫机机头。
Industrial sewing machine.Raised bed type covering stitch sewing machine head
- ICS
- 61.080
- CCS
- Y17
- 发布
- 2010-11-22
- 实施
- 2011-03-01
本部分规定了工业用缝纫机GC型和GN型机针的术语和定义、产品分类、要求、试验方法、检验规则和标志包装、运输、贮存。 本部分适用于平缝缝纫机用GC3×1型，刺绣机、双针平缝机用GC3×5型，包缝机用GN×1型机针。
Industrial sewing machine.Sewing needle.Part 1:The type of GC and GN
- ICS
- 61.080
- CCS
- Y17
- 发布
- 2010-04-22
- 实施
- 2010-10-01
