Y45 皮革加工与制品综合 标准查询与下载



共找到 693 条与 皮革加工与制品综合 相关的标准,共 47

Leather goods—General specification

ICS
59.140.35
CCS
Y45
发布
2019-12-31
实施
2020-07-01 00:00:00.0

本标准规定了皮革工业用粉状铬蹂剂的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于以重铬酸钠为主原料,经葡萄糖或二氧化硫等还原,再配入助剂而制成的粉状铬鞣剂。

Chrome powder for tanning

ICS
59.140.10
CCS
Y45
发布
2009-09-30
实施
2010-02-01

本标准规定了皮革五金配件中镍释放量的测定方法。 本标准适用于各类皮革五金配件。

Leather hardware accessory.Determination of release of nickel

ICS
59.140.10;59.140.35
CCS
Y45
发布
2008-12-30
实施
2009-09-01

本标准规定了染色皮革、毛皮产品中能裂解释放出23种有害芳香胺的偶氮染料的测定方法。 本标准适用于各种经过染色的皮革、皮毛产品及其制品。

Leather and fur.Chemical tests.Determination of banned azo colourants

ICS
59.140.30
CCS
Y45
发布
2005-09-26
实施
2006-04-01

本标准规定了皮革、毛皮产品中游离水解的甲醛含量的测定方法。 本标准适用于各种皮革、毛皮产品及其制品。

Leather and fur.Chemical tests.Determination of formaldehyde content

ICS
59.140.30
CCS
Y45
发布
2005-09-26
实施
2006-04-01

本标准规定了粉状铬鞣剂中六价铬离子含量的测定方法。 本标准适用于以重铬酸钠为原料,用硫酸等酸化,葡萄糖或二氧化硫(SO)等还原,或再配入助剂而制成的适用于制革主鞣或复鞣用的粉状铬鞣剂。

Chrome powder.Determination of chromium(VI)

ICS
59.140.10
CCS
Y45
发布
2005-09-26
实施
2006-04-01

本标准规定了皮革针孔撕裂强度的测定方法。 本标准适用于各种皮革。

Leather--Determination of the stitch tear resistance

ICS
59.140.10
CCS
Y45
发布
1999-12-17
实施
2000-05-01

本标准规定了皮革涂饰层与皮革之间(或涂饰层与涂饰层之间)的粘着牢度测定方法。 本标准适用于经过涂饰的各类皮革,本标准也适用于贴膜革。

Leather--Determination of adhesion of finish

ICS
CCS
Y45
发布
1996-12-17
实施
1997-05-01

本标准规定了皮革透气性的测定方法。 本标准适用于各种皮革。

Leather--Determination of air permeability

ICS
59.140.01
CCS
Y45
发布
1996-12-17
实施
1997-05-01

本标准规定了皮革吸水性的测定方法。 本标准适用于各种皮革。

Leather--Determination of absorption of water

ICS
59.140.01
CCS
Y45
发布
1996-12-17
实施
1997-05-01

本标准规定了染色毛皮耐摩擦色牢度的测试方法。 本标准适用于各类染色毛皮耐干、湿摩擦色牢度试验。

Test method for color fastness to rubbing of dyed fur

ICS
59.140.30
CCS
Y45
发布
1993-03-16
实施
1993-11-01

Green Factory Evaluation Requirements for Fur Dressing and Dyeing Industry

ICS
59.140.20
CCS
Y45
发布
2022-09-30
实施
2023-04-01

Determination of polychlorinated biphenyls in leather using gas chromatography-mass spectrometry

ICS
71.040.40
CCS
Y45
发布
2021-11-22
实施
2022-06-01

How to identify recycled leather

ICS
59.140.01
CCS
Y45
发布
2021-11-22
实施
2022-06-01

This document specifies a method for the determination of free formaldehyde, which is released under dynamic conditions when the sample is heated in an inert dry atmosphere, in process auxiliaries for leather. The analytical result obtained according to this procedure is expresse

Leather - Chemical tests - Determination of free formaldehyde in process auxiliaries (ISO 27587:2021); German version EN ISO 27587:2021

ICS
59.140.30
CCS
Y45
发布
2021-06-00
实施

Leather - Chemical determination of formaldehyde content - Part 1: Method using high-performance liquid chromatography

ICS
59.140.30
CCS
Y45
发布
2021-02-00
实施

This document specifies a method of determining the dimensional change (shrinkage) of leathers caused by ageing. It is applicable to all leathers.

Leather - Physical and mechanical tests - Determination of dimensional change

ICS
59.140.30
CCS
Y45
发布
2021-02-00
实施

This document specifies a test method by artificial perspiration solution aqueous extraction for the determination of the aqueous extractable content of the following preservative agents in leather by liquid chromatography: - 2-(thiocyanomethylthio)-benzothiazole (TCMTB); - 4-chl

Leather - Chemical determination of the preservative (TCMTB, PCMC, OPP, OIT) content in leather by liquid chromatography - Part 2: Artificial perspiration extraction method (ISO 13365-2:2020); German version EN ISO 13365-2:2020

ICS
59.140.30
CCS
Y45
发布
2020-12-01
实施

This International Standard specifies a test method for the determination of the content of the following preservative agents: - 2-(thiocyanomethylthio)-benzothiazole (TCMTB); - 4-chloro-3-methylphenol (PCMC); - 2-phenylphenol (OPP); - 2-octylisothiazol-3(2H)-one (OIT); in leathe

Leather - Chemical determination of the preservative (TCMTB, PCMC, OPP, OIT) content in leather by liquid chromatography - Part 1: Acetonitrile extraction method (ISO 13365-1:2020); German version EN ISO 13365-1:2020

ICS
59.140.30
CCS
Y45
发布
2020-12-01
实施

The present method allows the determination of the influence of liquid media transported in the pipe (chemical fluid) on the long-term hydrostatic strength of plastic pipes. For general requirements for plastic pipes in industrial applications, see DIN EN ISO 15494.

Determination of influence of chemical fluids on the long-term hydrostatic strength of pressure pipes made of thermoplastics materials

ICS
23.040.20
CCS
Y45
发布
2020-11-01
实施



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号