Y46 毛皮、皮革 标准查询与下载

KS M ISO 2419:2013 皮革.物理和机械试验.试样制备和状态调节

이 표준은 전처리와 시험을 위한 표준 상태와 함께 물리적ㆍ기계적 시험을 위한 가죽의 준비 방법을다루고 있다. 이 표준은 모든 형태의 가죽에 적용될 수 있다.

Leather ㅡ Physical and mechanical tests ㅡ Sample preparation and conditioning

ISO 17489:2013 皮革.化学试验.合成鞣剂中鞣料含量的测定

This International Standard specifies a simple and practical method of determining the adsorbable fraction of synthetic tanning agents using a polymer-based product. It is particularly suitable for measuring the batch-to-batch consistency of synthetic tanning agents.

Leather.Chemical tests.Determination of tan content in synthetic tanning agents

QB/T 2540-2013 皮革表带

本标准规定了皮革表带(以下简称“表带”)的要求、试验方法、检验规则和标志、包装、运输、贮存。本标准适用于以各种天然皮革、人造革制造的手表表带,其他合成革、织物等为材料制造的表带亦可参照使用。

Leather bracelets

BS ISO 5432:2013 皮革.湿蓝绵羊皮.规格

Leather. Wet blue sheep skins. Specification

ISO 5433:2013 皮革.湿铬鞣革牛皮.规格

This International Standard specifies requirements, methods of sampling and methods of test for wet blue leather produced from bovine hides and parts of bovine hides tanned without hair and with the use of basic chromium sulfate as the primary tanning agent.

Leather.Bovine wet blue.Specification

ISO 5432:2013 皮革.湿蓝绵羊皮.规格

This International Standard specifies requirements, methods of sampling and methods of test for wet blue leather produced from sheep skins tanned without wool and with the use of basic chromium sulfate as the primary tanning agent.

Leather.Wet blue sheep skins.Specification

ISO 5431:2013 皮革.蓝湿羊皮.规格

This International Standard specifies requirements, methods of sampling and methods of test for wet blue leather produced from goat skins tanned without hair and with the use of basic chromium sulfate as the primary tanning agent.

Leather.Wet blue goat skins.Specification

EN ISO 17502:2013 皮革.表面反射率的测定

Diese Internationale Norm legt ein Verfahren zur Bestimmung der Reflexionseigenschaften einer Lederoberflache von Licht im sichtbaren und nahen Infrarotbereich fest. Der Grad der Reflexion im nahen Infrarotbereich bestimmt, ob ein Leder als Sonnenlicht reflektierend eingestuft werden darf. Das Verfahren ist fur alle Lederarten, besonders fur gefarbtes Leder, anwendbar.

Leather - Determination of surface reflectance

EN ISO 17130:2013 皮革.物理和机械试验.尺寸变化测定

Diese Internationale Norm legt ein Verfahren zur Bestimmung der Mashaltigkeit (Schrumpfung) bei der Alterung von Leder fest. Die Norm gilt fur alle Leder.

Leather - Physical and mechanical tests - Determination of dimensional change

NF G52-046*NF EN 16223:2013 皮革. 衬垫物和汽车内饰用皮革的命名和描述要求

Leather - Requirements for the designation and description of leather in upholstery and automotive interior applications

DIN EN ISO 11642:2013 皮革.色牢度试验.耐水洗的色牢度(ISO 11642-2012).德文版本EN ISO 11642-2012

Leather - Tests for colour fastness - Colour fastness to water (ISO 11642:2012); German version EN ISO 11642:2012

DIN EN ISO 11641:2013 皮革.色牢度试验.耐汗渍的色牢度(ISO 11641-2012).德文版本EN ISO 11641-2012

Leather - Tests for colour fastness - Colour fastness to perspiration (ISO 11641:2012); German version EN ISO 11641:2012

DIN EN 16223:2013 皮革.衬垫物和汽车内饰用皮革的命名和描述要求.德文版本EN 16223-2012

This European Standard specifies requirements for the designations and descriptions that should be used in public or commercial communications,labels or product descriptions when leather is used in upholstered furniture and automotive interior applications. The designation or description of leather in footwear,leather goods and leather clothing including gloves are not covered by this document.

Leather.Requirements for the designation and description of leather in upholstery and automotive interior applications; German version EN 16223:2012

DIN EN ISO 11640:2013 皮革.色牢度试验.抗周期性往复磨擦的色牢度(ISO 11640-2012).德文版本EN ISO 11640-2012

Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing (ISO 11640:2012); German version EN ISO 11640:2012

NF G52-305*NF EN ISO 11642:2013 皮革.色牢度试验.耐水洗色牢度

Leather - Tests for colour fastness - Colour fastness to water

NF G52-350:2013 皮革.色牢度试验.耐周期性往复摩擦的色牢度

Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing

ASTM D2346-13 皮革表观密度的标准试验方法

4.1 This test method is designed to determine the apparent density of specimens from their area and thickness. By measuring apparent density, the degree of loading or of compression of leather can be evaluated. The test method is unsuitable for very soft leathers such as chamois whose thickness cannot be accurately measured by the test method cited. 1.1 This test method covers the determination of the apparent density of specimens of leather. This test method does not apply to wet blue. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Apparent Density of Leather

ASTM D6075-13 皮革耐开裂性的标准试验方法

5.1 This test method is designed to determine the cracking resistance of the grain or finish surface of leather on a pass/fail basis. This test method attempts to replicate the conditions that may be encountered by leather that is bent around a buckle frame or other anchoring device, folded over in seams or welts, and so forth. The cracking resistance of leather is influenced by many factors such as quantity, location, and type of fatliquoring materials; moisture content; thickness; the presence of defects or scar tissue, or both; the presence of processing damages to the skin or hide tissue; finish system formulation, and so forth. This test method is useful for manufacturing control in the tannery, specification acceptance, and quality control in the end product manufacturing plant. 1.1 This test method covers the determination of the resistance of leather to cracking when the leather is bent or folded with the grain (or finish) surface on the outside of the bend. Heavy leathers (for example, harness, belt, strap, bag, case, and so forth) are usually bent around a mandrel using either mechanical resistance (for example, clamp, vise, and so forth) or by hand. Lighter leathers (for example, shoe upper, upholstery, garment, glove, and so forth) are usually given a sharp double-fold (crosswise) bend after cooling to a low temperature. This test method does not apply to wet blue. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Cracking Resistance of Leather

ASTM D2810-13 皮革pH值的标准试验方法

4.1 This test method is designed to measure the pH of a distilled-water extract of leather. This is considered to be a measure of the acidity or alkalinity of the leather. Excessive acidity or alkalinity may have a deleterious effect on the aging characteristics of leather. 4.2 This test method is suitable for development, control, and service evaluation of leather. 1.1 This test method covers the determination of the pH of all types of leather. This method does not apply to wet blue. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for pH of Leather

ASTM D4705-13 皮革、双孔的缝合撕裂强度标准试验方法

3.1 This test method is designed to measure the load required to tear leather through two holes in the test specimen. Tanners and leather buyers have found that this test gives an indication of the resistance of leather to tearing. It is of particular value in estimating the durability of leather to withstand tearing stresses encountered in the manufacture of shoes, garments, and upholstered products. The thickness of the specimen and direction of tear relative to the backbone will affect the uniformity of the test results. This test method may not apply when the conditions of the test employed differ widely from those specified in the test method. 1.1 This test method is intended for use in determining the stitch tearing resistance of leather using a double hole tear. It is particularly applicable to lightweight leathers. This test method does not apply to wet blue. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Stitch Tear Strength of Leather, Double Hole