Y50 文具、绘图仪器、簿册、卡片 标准查询与下载

JIS S 6037:2006 标记笔

この規格は，プラスチック製，ガラス製又は金属製容器の中にインキを含ませた吸収体を入れ，これらに繊維製又はプラスチック製ペン先を取り付けたマーキングペン(以下，マーキングペンという。)について規定する。

Marking pens

JIS S 6054:2006 水性圆珠笔和笔芯

この規格は，水性ボールペン及び水性ボールペン用レフィル(以下，レフィルという。)の品質について規定する。

Roller ball pens and refills

JIS S 6039:2006 圆珠笔和笔芯

この規格は，油性ポールペン及び油性ポールペン用レフィル(以下，レフィルという。)の品質について規定する。

Ball point pens and refills

JIS S 6051:2006 塑料卡片盒

この規格は，透明なプラスチック製シート及びフィルム(以下，シートという。)を用いて，重ね合わせたシートの三辺を接着・溶着したもの又は一辺を折り曲げて他の二辺を接着・溶着したもので，紙などを入れるプラスチック製カードケース(以下，カードケースという。)について規定する。

Plastics card cases

KS G 2632-2006 写字垫

이 규격은 책받침에 대하여 규정한다.

Back plate for writing

ASTM D6901-06 美术彩色铅笔的标准规范

1.1 This specification establishes requirements for composition, performance, and labeling of artists'' colored pencils.1.2 This specification covers vehicles and additives. Requirements are included for identification, lightfastness, and consistency.1.3 Colored pencil specimens are exposed to both natural daylight through window glass and simulated window glass-filtered daylight radiation to determine the lightfastness rating for each pencil.

Standard Specification for Artists'' Colored Pencils

ASTM D4941-06 画家用膏状颜料消耗品的制备标准实施规范

1.1 This practice covers the production of uniform films of artists' tube paints and other nonflowing pigmented paints using paint applicators designed for less viscous paints.1.2 Information on how to achieve opaque specimens from these paints is included.1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Preparing Drawdowns of Artists' Paste Paints

ISO/IEC 24700:2005 包含重新使用部件的办公设备的质量和性能

This International Standard specifies product characteristics for use in an original equipment manufacturer's or authorized third party's declaration of conformity to demonstrate that an office equipment product that contains reused components performs equivalent to new, meeting equivalent to new component Specifications and performance criteria, and continues to meet all the safety and environmental criteria required by responsibly built products. The International Standard is relevant to office equipment products whose manufacturing and recovery processes result in the reuse of components. Annex C has a description of how reuse relates to other recycling processes. This International Standard specifically addresses office equipment. Consumable items such as customer replaceable toner cartridges are not in the scope of this International Standard. Equipment reprocessed by the original manufacturer or an authorized third party that does NOT meet the equipment's original design performance specification is not in the scope of this International Standard. This International Standard is applicable to: — A situation in which a government requires a neutral benchmark to evaluate the quality, safety and performance of equipment that contains reused components and to demonstrate the environmental responsibility of the supplier. When regulations mandate a neutral benchmark for equipment, this International Standard provides the benchmark for proving compliance with such regulation. — A situation in which a commercial supplier requires a neutral benchmark to demonstrate and communicate the quality, safety and performance of equipment that contains reused components and to demonstrate the environmental responsibility of the supplier. — Situations in which consumers require a neutral benchmark to identify or distinguish environmentally responsible products. This International Standard reflects the world's current approaches that yield products from many manufacturing processes including the reuse of components, with the equipment's warranties and guarantees playing an important role in the market acceptance. In today's procurement processes, technical equipment definitions used by the regulators must be addressed and, in that sense, this International Standard will be useful in procurement and, in the trade facilitation area, to communicate with the regulators. This International Standard specifically addresses office equipment. However, in the future it may provide valuable directions for other industries and industrial sectors.

Quality and performance of office equipment that contains reused components

DIN 5008:2005 文本表示法规则

This standard facilitates the input of text, helps to reduce typing, enables information processing and ensures data interchange between different devices.

Rules for text presentation

QB/T 1474.7-2005 绘图仪尺.术语、检验规则、标志、包装、运输、贮存

本标准规定了绘图仪尺的术语、检验规则、标志、包装、运输、贮存。 本标准适用于合成树脂直尺、三角尺、比例尺、丁字尺、量角器、绘图模板等绘图仪尺。

Drawing ruler - Terminology, inspect regulations and mark, package, transport, storage

QB/T 1474.6-2005 绘图仪尺.绘图模板

本标准规定了合成树脂绘图模板的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于合成树脂绘图模板。

Drawing ruler - Drawing template

QB/T 1474.5-2005 绘图仪尺.量角器

本标准规定了合成树脂绘图量角器的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于合成树脂绘图量角器。

Drawing ruler - Protractor

QB/T 1474.4-2005 绘图仪尺.丁字尺

本标准规定了合成树脂绘图丁字尺的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于合成树脂绘图丁字尺。

Drawing ruler - T-square

QB/T 1474.3-2005 绘图仪尺.比例尺

本标准规定了合成树脂绘图比例尺(三棱比例尺和比例直尺)的分类、要求，试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于合成树脂绘图三棱比例尺和比例直尺。

Drawing ruler - Reduction flat ruler and triangle scale

QB/T 1474.2-2005 绘图仪尺.三角尺

本标准规定了合成树脂绘图三角尺的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于合成树脂绘图三角尺。

Drawing ruler - Triangle set square

QB/T 1474.1-2005 绘图仪尺.直尺

本标准规定了合成树脂绘图直尺的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于合成树脂绘图直尺。

Drawing ruler - Flat ruler

QB/T 1439-2005 帐册

本标准规定了帐册的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于各种规格的帐册。

Account book

QB/T 1437-2005 课业簿册

本标准规定了课业簿册的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于各种规格的课业簿册。

Exercise book

SANS 1660:2005 修正液

Specifies the requirements for correction fluids that are intended for the correction of typing and writing errors and that are used for copy preparation. Also covers correction fluids that are used in conjunction with thinners.

Correction fluids

DB36/T 441-2005 中小学生作业本

"规定了中小学生作业本的产品分类、要求、试验方法、检验规则、标志、包装、运输和贮存,适用于普通书写用中小学生作业本"

primary and middle school students' workbook