Y57 玩具 标准查询与下载

DIN EN 71-8:2011 玩具安全性.第8部分:家用活动玩具;德文版本EN 71-8-2011

This European Standard specifies requirements and test methods for activity toys for domestic use often attached to or incorporating a crossbeam, and similar toys intended for children under 14 years to play on or in and often intended to bear the mass fo one or more children.

Safety of toys - Part 8: Activity toys for domestic use; German version EN 71-8:2011

BS EN 71-8:2011 玩具的安全性.家用活动玩具

Safety of toys. Activity toys for domestic use

KS G ISO 8124-2:2011 玩具安全.第2部分:可燃性

이 표준은 모든 종류의 완구에 사용해서는 안 되는 가연성 재료의 범위 및 작은 인화원에 접

Safety of toys-Part 2:Flammability

DIN EN 71-2:2011 玩具安全.第2部分:易燃性;德文版本EN 71-2-2011

Safety of toys - Part 2: Flammability; German version EN 71-2:2011

BS EN 71-2:2011 玩具安全性.易燃性

This European Standard specifies the categories of flammable materials which are prohibited in all toys, and requirements concerning flammability of certain toys when they are subjected to a small source of ignition. The test methods described in Clause 5 are used for the purposes of determining the flammability of toys under the particular test conditions specified. The test results thus obtained cannot be considered as providing an overall indication of the potential fire hazard of toys or materials when subjected to other sources of ignition. This European Standard includes general requirements relating to all toys and specific requirements and methods of test relating to the following toys, which are considered as being those presenting the greatest hazard:  toys to be worn on the head: beards, moustaches, wigs, etc. made from hair, pile or material with similar features; masks; hoods, head-dresses, etc.; flowing elements of toys to be worn on the head, but excluding paper novelty hats of the type usually supplied in party crackers;  toy disguise costumes and toys intended to be worn by a child in play;  toys intended to be entered by a child;  soft-filled toys. NOTE Additional requirements for flammability of electric toys are specified in EN 62115.

Safety of toys. Flammability

DIN EN 71-1:2011 玩具安全.第1部分:机械和物理性能;德文版本EN 71-1-2005+A14-2011

This European Standard specifies requirements and methods of tests for mechanical and physical properties of toys. This European Standard applies to toys for children, toys being any product or material designed or intended, whether or not exclusively, for use in play by children of less than 14 years. It refers to new toys taking into account the period of foreseeable and normal use, and that the toys are used as intended or in a foreseeable way, bearing in mind the behaviour of children. It includes specific requirements for toys intended for children under 36 months, children under 18 months and for children who are too young to sit up unaided.

Safety of toys - Part 1: Mechanical and physical properties; German version EN 71-1:2011

BS EN 71-1:2011+A3:2014 玩具安全性.机械和物理特性

Safety of toys. Mechanical and physical properties

BS EN 71-1:2011 玩具的安全性.机械和物理性质

This European Standard specifies requirements and methods of tests for mechanical and physical properties of toys. This European Standard applies to toys for children, toys being any product or material designed or intended, whether or not exclusively, for use in play by children of less than 14 years. It refers to new toys taking into account the period of foreseeable and normal use, and that the toys are used as intended or in a foreseeable way, bearing in mind the behaviour of children. It includes specific requirements for toys intended for children under 36 months, children under 18 months and for children who are too young to sit up unaided. According to Directive 2009/48/EC “intended for use by” means that a parent or supervisor shall reasonably be able to assume by virtue of the functions, dimensions and characteristics of a toy that it is intended for use by children of the stated age group. Therefore, for the purpose of this European Standard, e.g. soft-filled toys with simple features intended for holding and cuddling are considered as toys intended for children under 36 months.

Safety of toys. Mechanical and physical properties

BS EN 71-1:2011+A2:2013 玩具安全性.机械和物理特性

Safety of toys. Mechanical and physical properties

SN/T 2791.2-2011 进出口玩具检验通用技术要求 第2部分：电性能安全技术要求

SN/T 2791的本部规定了进出口玩具的电性能安全技术要求。 本部分适用于进出口的电玩具，其适用范围参见附录A.

General Technical Requirements for Import and Export Toy Inspection Part 2: Electrical Safety Technical Requirements

DB45/T 726-2011 大型游乐设施日常维护保养规范

Specifications for daily maintenance of large amusement facilities

IEC 62115:2011 电动玩具.安全性

This International Standard deals with the safety of toys that have at least one function dependent on electricity. Toys using electricity for secondary functions are within the scope of this standard. In order to comply with this standard, electric toys also have to comply with ISO 8124-1, since it covers hazards other than those arising by the use of electricity.

Electric toys - Safety

ANSI/ASTM F963:2011 玩具安全的客户安全规范

Consumer Safety Specification for Toy Safety

BS CWA 16259:2011 可靠的远程赌博措施

Responsible remote gambling measures

ASTM F2373-11 6个月至23个月幼儿公共游戏设施的标准消费者安全性能规范

1.1 This consumer safety performance specification provides safety and performance requirements for various types of public use play equipment such as, but not limited to, composite play structures, climbing structures, to-fro swings, spring rocking equipment, and slides. It is intended to apply to play equipment that is used in places of public assembly, including early care and education facilities, parks, or playgrounds. Public use play areas for children in this age range include both indoor (classroom) settings and outdoor playgrounds. Where appropriate, distinctions will be made between indoor and outdoor settings where there is supervision (for example, a play area that is part of an early care and education facility), and settings with unlimited access (for example, public playgrounds and parks). 1.2 The range of users encompassed by this consumer safety performance specification is the 5th percentile 6 month old through the 95th percentile 23 month old. 1.3 The purpose of this specification is to reduce the potential for life threatening and debilitating injuries. 1.4 Accessory toys attached to play equipment must meet all relevant standards including this consumer safety performance specification. 1.5 Home playground equipment, amusement park equipment, sports equipment, fitness equipment, soft contained play equipment, tricycles, toys, juvenile care products such as, but not limited to, infant swings, play yards, expansion gates, and expandable enclosures, furniture (including child-sized house play furnishings and sand/water tables intended primarily for indoor use), bassinets and cradles, infant walkers, bouncer seats, jumpers, infant stationary activity centers, and infant carriers are not included in the scope of this specification. 1.6 This consumer safety performance specification includes the following sections: TitleSection Scope1 Referenced Documents2 ASTM Standards2.1 ANSI Standards2.2 Federal Standards2.3 CPSC Documents2.4 UL Standard2.5 European Standard2.6 Terminology3 Materials and Manufacture4 General Requirements4.1 Fasteners4.2 Toxic or Hazardous Substances4.3 Stuffing, Loose Fillers, and Padding Materials4.4 General Requirements5 Compliance Documentation5.1 Small Parts5.2 Asphyxiation Hazard

Standard Consumer Safety Performance Specification for Public Use Play Equipment for Children 6 Months through 23 Months

ASTM F963-11 玩具安全的消费者安全标准规范

1.1 This specification relates to possible hazards that may not be recognized readily by the public and that may be encountered in the normal use for which a toy is intended or after reasonably foreseeable abuse. It does not purport to cover every conceivable hazard of a particular toy. This specification does not cover product performance or quality, except as related to safety. Except for the labeling requirements pointing out the functional hazards and age range for which the toy is intended, this specification has no requirements for those aspects of a toy that present an inherent and recognized hazard as part of the function of the toy. Such an example is a sharp point necessary for the function of a needle. The needle is an inherent hazard that is well understood by the purchaser of a toy sewing kit, and this hazard is communicated to the user as part of the normal educational process. 1.2 On the other hand, while a riding toy has inherent hazards associated with its use (for example, falling off onto the sidewalk), the possible hazards associated with its construction (sharp edges, exposed mechanisms, etc.) will be minimized by the application of this specification. 1.3 This specification covers requirements and contains test methods for toys intended for use by children under 14 years of age. Different age limits for various requirements will be found in this specification. These limits reflect the nature of the hazards and expected mental or physical ability, or both, of a child to cope with the hazards. 1.4 Articles not covered by this specification are as follows: Bicycles Tricycles Non-Powered Scooters (see Consumer Safety Specification F2264) Recreational Powered Scooters and Pocket Bikes (see Consumer Safety Specification F2641) Sling shots and sharp-pointed darts Playground equipment Non-powder guns Kites Hobby and craft items in which the finished item is not primarily of play value Model kits in which the finished item is not primarily of play value Crayons, paints, chalks, and other similar art materials in which the material itself or the finished item is not primarily of play value, except that all art materials, whether or not a component of a toy, must comply with LHAMA, in accordance with 4.29.1-4.29.3. Toy Chests Sporting goods, camping goods, athletic equipment, musical instruments, juvenile products, and furniture; however, toys that are their counterparts are covered. (It is recognized that there is often a fine line between, for example, a musical instrument or a sporting item and its toy counterpart. The intention of the producer or distributor, as well as normal use and reasonably foreseeable abuse, determines whether the item is a toy counterpart.) Powered models of aircraft, rockets, boats, and land vehicles; however, toys that are their counterparts are covered. Constant air inflatables 1.5 General guidelines for age labeling toys and toy packaging are contained in Annex A1. 1.6 Information regarding packaging and shipping is contained in Annex A2. 1.7 This consumer safety specification includes the following sections: TitleSection Scope1 Referenced Documents2

Standard Consumer Safety Specification for Toy Safety

ASTM F2088-11b 婴儿秋千的标准消费者安全规范

1.1 This consumer safety specification establishes safety performance requirements, test methods, and labeling requirements to minimize the hazards to infants presented by swings as identified in the introduction. 1.2 This consumer safety specification is intended to minimize the risk of injuries to infants resulting from normal use and reasonably foreseeable misuse or abuse of infant swings. It is not intended to address all incidents and injuries resulting from the interaction of other persons with the infant in the swing. 1.3 No swing produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 The following precautionary caveat pertains only to the test method portion, Section 7, of this consumer safety specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Consumer Safety Specification for Infant Swings

ASTM F977-11a 婴儿学步车的标准消费者安全规范

1.1 This consumer safety specification covers performance requirements, test methods, and marking requirements to promote safe use of the infant walker (see 3.1). 1.2 This consumer safety specification is intended to minimize accidents to children resulting from normal use and reasonably foreseeable misuse or abuse of walkers. 1.3 No walker produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein. 1.4 This consumer safety specification is not intended to address accidents and injuries resulting from the interaction of other persons with the child in the walker or the accidents resulting from abuse and misuse by children able to walk. 1.5 The values stated in inch-pound units are to be regarded as the standard. The SI units given in parentheses are for information only. 1.6 The following precautionary caveat pertains only to the test method portion, Section 7, of this consumer safety specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Consumer Safety Specification for Infant Walkers

ANSI/LEO 8000-2011 可持续电子游戏机标准

The goal of this process has been to help the gaming industry identify and communicate the sustainability parameters of their products and services and to allow industry purchasers to identify their sustainability preferences when purchasing gaming equipment and services. The standard development committee has developed comprehensive frameworks and sustainability metrics that assess environmental, social, and economic performance at all levels of the gaming industry's supply and delivery chain and encourages continuous improvement in overall sustainability performance.

Standard for Sustainable Electronic Gaming Machines

ASTM F2137-11 娱乐骑座设备和娱乐设备动力特性测量标准操作规程

p>This practice is intended for use whenever the dynamic characteristics of an amusement ride or device are to be determined. The existence of this practice is not intended to imply that there is a requirement to perform specific testing on amusement rides or devices. The general provisions of this practice provide instrumentation specifications, data acquisition and testing procedures, and documentation requirements that when applied will improve the repeatability, reliability, and utility of the test results. Based on the general provisions of this practice, the SARC Test specifications, when followed, will yield standardized test results regarding the patron-related, dynamic motion of amusement rides or devices. The SARC Test will facilitate both the meaningful comparison of the dynamic motion of different amusement rides or devices and the tracking of changes, if any, in the dynamic characteristics of a given ride or device.1.1 This practice covers acquisition of data related to the dynamic characteristics of amusement rides and devices. 1.2 This practice also defines the specific requirements of a Standardized Amusement Ride Characterization Test (SARC Test) for use in characterizing the dynamic motion of an amusement ride or device. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3.1 Exception8212;The values are reversed in Section 13 since EN standards primarily use SI units.

Standard Practice for Measuring the Dynamic Characteristics of Amusement Rides and Devices