Y73 日用五金制品 标准查询与下载

QB/T 1586.1-1992 箱包五金配件 箱锁

本标准规定了旅行衣箱箱锁的技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于以人造革、天然革和其他材料制成的各种旅行衣箱的箱锁，其他箱用锁也适用。

Luggage hardware accessories box lock

QB/T 1586.4-1992 箱包五金配件 箱用铝合金型材

本标准规定了铝合金型材的质量要求。 本标准适用于旅行衣箱箱口及其他装饰用铝合金型材。

Aluminum alloy profiles for luggage hardware accessories

QB/T 1586.3-1992 箱包五金配件 箱提把

本标准规定了旅行衣箱箱提把的技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于以人造革、天然革和其他材料制成的各种旅行衣箱的提把.其他箱用提把也适用。

Luggage hardware accessories box handle

QB/T 1586.2-1992 箱包五金配件 箱走轮

本标准规定了旅行衣箱走轮的技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于以人造革、天然革和其他材料制成的各种旅行衣箱的走轮，其他箱包用走轮也适用。

Luggage hardware accessories box walking wheel

BS 3084:1992 拉链规范

Performance requirements for slide fasteners supplied for use in industry and also when sold individually to the general public.

Specification for slide fasteners

QB/T 1200-1991 链条管子钳

本标准规定了链条管子钳的产品分类、技术要求、试验方法、检验规则、包装、标志、运输与贮存等内容。 本标准适用于夹持和旋转画形金属管遭工件的链条管子钳。

chain pipe wrench

QB/T 1142-1991 按扣

本标准规定了按扣的产品分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于服装、鞋帽、袋、套等作紧扣联接之用的金属弹簧按扣。

button

NF P26-314:1991 五金.建筑物用锁.管状锁

Hardware. Locks for building. Tubular locks.

QB/T 1107-1991 铝合金毛衣编织针

本标准规定了彩色铝合金毛衣编织针的产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存等内容。 本标准适用于四支为一副的彩色铝合金毛衣编织针(以下简称毛衣针)。

Aluminum alloy sweater knitting needle

QB/T 1105-1991 刮脸双面刀片

本标准规定了刮脸双面刀片的产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于刮脸用的碳钢和不锈钢双面刀片(以下简称刀片)。

double sided shaving blade

QB/T 1104-1991 刮脸双面刀架

本标准规定了刮脸双面刀架的产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于装置刮脸双面刀片的刮脸双面刀架(以下简称刀架)。

Shaving double-sided knife holder

QB/T 1108-1991 钢锯架

本标准规定了钢锯架的分类、技术要求、试验方法、检验规则和标志、包装、运输与贮存等要求。 本标准适用于供人工切割金属材料用的锯架，使用时需装上相应的锯条。

hacksaw frame

QB 1001-1990 自行车锁

本标准规定了自行车锁分类、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于弹子自行车锁。

bicycle lock

NF P26-412:1989 五金.建筑物用锁.试验程序

Hardware. Building locks. Testing procedure.

NF P26-301:1989 五金.建筑物用锁的一般特性

Hardware. General characteristics of building locks.

AIR FORCE MIL-M-6269 G VALID NOTICE 1-1989 飞行员用连指手套

MIL-M-6269G, dated 11 May 1982, has been reviewed and determined to be valid for use in acquisition.

MITTEN, SET, FLYERS

AIR FORCE MIL-M-27529 B VALID NOTICE 1-1989 SRU-10/P极端寒冷天气生存用连指手套

MIL-M-27529B, dated 16 October 1973, has been reviewed and determined to be valid for use in acquisition.

MITTENS, EXTREME COLD WEATHER SURVIVAL, SRU-10/P

ASTM D3692-89(2012) 有标签的衣物及家用装饰物用拉链选择的标准实施规程

This practice is useful for the selection of zippers that will be compatible with items to be care labeled. This practice is useful as a guide for the selection of test methods to evaluate zipper properties that are relevant to care-labeled items.1.1 This practice provides guidelines to the manufacturer for the selection of zippers to be used in garments and household furnishings that have care labels. The use of this practice will facilitate the selection of a zipper compatible with the end-item requirements. In the absence of complete knowledge of end-item characteristics, it is not possible to stipulate specific universal characteristics for a care label. Therefore following initial selection, the chosen zipper should be tested in a prototype item to confirm its suitability. Zipper properties to be considered are those that may, following refurbishing, be the ones likely to adversely affect the continued use and enjoyment of the item in which the zipper is installed. 1.2 The product characteristics evaluated by this practice are shrinkage, colorfastness, and ironing deformation. Note 18212;Test methods of interest include Test Method D2052, Test Method D2053, Test Method D2054, Test Method D2057, Test Method D2060, 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Selection of Zippers for Care-Labeled Apparel and Household Furnishings

AIR FORCE MIL-M-9105 D VALID NOTICE 1-1989 (N-2型皮革连指手套风格空勤人员手套)插入式连指手套

MIL-M-9105D, dated 23 April 1971, has been reviewed and determined to be valid for use in acquisition

MITTEN, INSERTS (GLOVES, AIR CREW, MITTEN STYLE, LEATHER, TYPE N-2)

ARMY MS90722 REV A-1988 大头钉切削

1. ALL DBESICEs ARE IN IKZES. 2. IN "E W W CCNPLICPBElWBN 'ME TEXT CF THIS -AND "E "EEWE C I W HEREIN, a? 'IBIS SRiNLnm SBALIi TAKE PFcTEEwE. "E 'IEX'i 3.-WESNEWT(OR-) K U ü % N ? S W " E I S S L E L I S ? E D in < R 1 A T I S S U E W " E ~ ~ W DeFEpFE INM( CX SPECIFICATIOEG AND STAlEkWE(DUDISS) SPECIFIED IN THE SCLICITATICN Mp(M A PARC OF 'IBIS SPAWARD M THE E mSPE CIFIED HEREIN.

TACK, CUT