Y76 服装、服饰品 标准查询与下载
共找到 877 条与 服装、服饰品 相关的标准，共 59 页
本标准规定了高尔夫球服装的质量要求、检验方法、检验规则、产品合格判定、标志、包装、运输和贮存等。 本标准适用于以棉、化纤等纺织织物为主要原料生产的高尔夫球服装（本标准不适用于年龄36个月以内的婴幼儿服装）。
Basic technical requirements for golf apparel
- ICS
- 01.040.61
- CCS
- Y76
- 发布
- 2017-10-25
- 实施
- 2018-01-25
This International Standard defines the terms that are commonly used for the digital fitting system. The digital fitting system includes virtual fabric, virtual fabric properties, virtual garment pattern, virtual garment pattern properties, virtual sewing line, virtual garment, and virtual garment simulation of a virtual garment on a virtual human body model for fit assessment.
Clothing - Digital fittings - Vocabulary and terminology used for the virtual garment (ISO 18163:2016)
- ICS
- 01.040.35;01.040.61;35.240.63;61.020
- CCS
- Y76
- 发布
- 2017-09-00
- 实施
Clothing - Digital fittings - Attributes of virtual garments (ISO 18831:2016)
- ICS
- 35.240.63;61.020
- CCS
- Y76
- 发布
- 2017-07
- 实施
Size designation of clothes. Tights
- ICS
- 61.020
- CCS
- Y76
- 发布
- 2017-06-16
- 实施
- 2017-06-16
本标准规定了牛仔服装的术语和定义、要求、检验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于以纯棉或棉纤维为主要原料的机织牛仔布生产的牛仔服装。 本标准不适用于年龄在36个月及以下的婴幼儿服装。
Jeanswear
- ICS
- 61.020
- CCS
- Y76
- 发布
- 2017-04-21
- 实施
- 2017-10-01
Clothing - Digital fittings - Part 2: Vocabulary and terminology used for attributes of the virtual human body (ISO 18825-2:2016)
- ICS
- 61.020
- CCS
- Y76
- 发布
- 2017-04
- 实施
Clothing - Digital fittings - Part 1: Vocabulary and terminology used for the virtual human body (ISO 18825-1:2016)
- ICS
- 01.040.61;61.020
- CCS
- Y76
- 发布
- 2017-04
- 实施
Size designation of clothes. Primary and secondary dimension indicators
- ICS
- 61.020
- CCS
- Y76
- 发布
- 2017-03-31
- 实施
- 2017-03-31
Size designation of clothes. Anthropometric definitions for body measurement
- ICS
- 61.020
- CCS
- Y76
- 发布
- 2017-03-31
- 实施
- 2017-03-31
本标准规定了羽绒羽毛中沙门氏菌的酶联免疫检测方法。 本标准适用于各种品种、规格的羽绒羽毛及其制品填充料中沙门氏菌的检验。
Enzyme-linked immunoassay for the detection of Salmonella in down and feathers
- ICS
- 61.020
- CCS
- Y76
- 发布
- 2017-03-30
- 实施
- 2017-04-30
This document provides a description of anthropometric measurements that can be used as a basis for the creation of physical and digital anthropometric databases. The list of measurements specified in this document is intended to serve as a guide for practitioners in the field of clothing who are required to apply their knowledge to select population market segments and to create size and shape profiles for the development of all garment types and their equivalent fit mannequins. The list provides a guide for how to take anthropometric measurements, as well as give information to clothing product development teams and fit mannequin manufacturers on the principles of measurement and their underlying anatomical and anthropometrical bases. Annex A describes the use of the pictogram (standardized and modified) based on the selection of most usual body dimensions used for clothing size designation. This document is intended to be used in conjunction with national, regional or international regulations or agreements to ensure harmony in defining population groups and to allow comparison of anthropometric data sets.
Size designation of clothes - Part 1: Anthropometric definitions for body measurement
- ICS
- 61.020
- CCS
- Y76
- 发布
- 2017-03-00
- 实施
High visibility clothing - Test methods and requirements (ISO 20471:2013, Corrected version 2013-06-01 + Amd 1:2016); German version EN ISO 20471:2013 + A1:2016
- ICS
- 13.340.10
- CCS
- Y76
- 发布
- 2017-03
- 实施
5.1 The manufacturing of textile products uses seam engineering to determine the best combination of sewing thread, stitch type, seam type, and stitch density to construct the end use structure. These four seam engineering variables contribute to a textile product being able to achieve the maximum sewn seam strength performance and structural integrity when cut pieces of fabric are joined together. 5.1.1 It is known that for some textile structures the seam engineering variables are selected to meet a “one time performance requirement.” This means that following the “single incident” during which the maximum performance potential or capability of the textile structure has been met, it is expected to be discarded and replaced with another “new” unit. For example: an inflatable restraint in an automobile. Once deployed, it must be replaced; it cannot be re-used. Likewise, there are other textile structures, intended to be used multiple times, while also being subjected to various care and maintenance regimens. 5.1.2 This test method enables the fabric producer of woven fabrics, the textile producer, and other users of the test method to determine which seam engineering choices can be made relative to: sewing thread tex size; seam type; stitch type; and stitch density to determine the potential outcomes that can occur when a particular woven fabric is used: (a) What is the maximum force at which sewn seam strength failure will enable products made with this fabric to be repaired? (b) What is the highest seam efficiency percentage attained? (c) What is the maximum force at which the sewn seam strength results in seam slippage that can cause yarn slippage, yarn displacement and fabric failure? 5.1.2.1 The maximum force at which sewn seam strength or the highest seam efficiency retained demonstrate failure of the stitching without causing the displacement of one or more fabric yarns from their original position mean that the product can be repaired. When the failure results in displacement of yarns, the textile product will need to be replaced. 5.1.3 The procedures used in this test method represent two primary seam engineering techniques identified in Practice D6193 and used to manufacture products made of woven textile fabrics. 5.1.4 In case of dispute arising from differences in reported test results when using this test method for acceptance testing of commercial shipments, the purchaser and the supplier should perform comparative tests to determine if there is a statistical bias between their laboratories. Competent statistical assistance is recommended for the investigation of bias. As a minimum, the two parties should take a group of test specimens from the same lot of fabric to be evaluated, which utilize a like seam assembly (or standard seam assembly). The test specimens should then be randomly assigned in equal numbers to each laboratory for testing. If a bias is found, either its cause must be determined and corrected, or the purchaser and supplier must agree to interpret future test results in light of the known bias. 5.2 This test ......
Standard Test Method for Failure in Sewn Seams of Woven Fabrics
- ICS
- 59.080.30
- CCS
- Y76
- 发布
- 2017
- 实施
Yao Costumes Part 1: Nandan Baiku Yao Costumes
- ICS
- 61.020
- CCS
- Y76
- 发布
- 2016-09-30
- 实施
- 2016-10-30
Determination of dimensional characteristics of sleeping bags - Part 3: Volume under load and easiness of packing; German version EN 13538-3:2016
- ICS
- 97.200.30
- CCS
- Y76
- 发布
- 2016-09
- 实施
This European Standard specifies the essential requirements of calcium chloride and magnesium chloride for spreading on roads for winter maintenance and includes tests of these requirements. The requirements are specified for calcium chloride and magnesium chloride in solid form and in water solution, which is delivered to the customer.
Winter service equipment and products - De-icing agents - Part 2: Calcium chloride and Magnesium chloride - Requirements and test methods
- ICS
- 13.030.40;71.100.45
- CCS
- Y76
- 发布
- 2016-08
- 实施
This European Standard specifies the essential requirements of sodium chloride (salt) for spreading on roads for winter maintenance and includes tests of these requirements. The requirements are specified for salt in crystallized form and for salt in solution (brine), which is delivered to the customer.
Winter service equipment and products - De-icing agents - Part 1: Sodium chloride - Requirements and test methods
- ICS
- 13.030.40;71.100.45
- CCS
- Y76
- 发布
- 2016-08
- 实施
Clothing - Digital fittings - Part 2: Vocabulary and terminology used for attributes of the virtual human body
- ICS
- 61.020
- CCS
- Y76
- 发布
- 2016-07
- 实施
Clothing - Digital fittings - Part 1: Vocabulary and terminology used for the virtual human body
- ICS
- 01.040.61;61.020
- CCS
- Y76
- 发布
- 2016-07
- 实施
