Y76 服装、服饰品 标准查询与下载

DB43/T 761-2013 拒水、防油、易去污功能棉服装

Water-repellent, oil-proof, easy-to-decontaminate functional cotton clothing

BS EN 1080:2013 幼儿用碰撞防护帽

Impact protection helmets for young children

DIN CEN/TR 16446:2013 纺织品.童装安全性.使用EN 14682-2007童装上灯芯绒和拉绳标准的导则.规格.德文版本CEN/TR 16446-2012

Textiles - Safety of children's clothing - Guidance on the use of EN 14682:2007 Cords and drawstrings on children's clothing - Specifications; German version CEN/TR 16446:2012

ASTM D3785-13e1 机织领带和围巾织物的标准性能规格

5.1 Upon mutual agreement between the purchaser and the seller, woven fabrics intended for this end use should meet all of the requirements listed in Table 1 of this specification. 5.2 It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in Table 1 may be modified by mutual agreement between the purchaser and the seller. 5.2.1 In such cases, any references to the specification shall specify that: This fabric meets ASTM Specification D3785 except for the following characteristic(s). 5.3 Where no prepurchase agreement has been reached between the purchaser and the seller, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 5.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric. 5.4 The significance and use of particular properties and test methods are discussed in the appropriate sections of the specified test methods. 1.1 This performance specification covers woven necktie and scarf fabrics composed of any textile fiber or mixture of textile fibers. 1.2 This performance specification is not applicable to woven fabrics used for interlinings. 1.3 These requirements apply to the length and width directions for those properties where fabric direction is pertinent. 1.3.1 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 The following precautionary caveat pertains only to the test methods portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Woven Necktie and Scarf Fabrics

ASTM E1549/E1549M-13 非危险和危险操作的航天器在洁净室和受控环境中所需的ESD控制服装的标准规范

1.1 This document specifies special items of clothing (cleanroom garments) designed to protect aerospace products from electrostatic discharge and from contaminants released by personnel and garments. Special clothing includes low linting coveralls, footwear, and head covers. 1.2 The function of cleanroom garments is to contain the contaminants generated by people and to minimize contaminants from the garments. 1.3 Two types of fabrics can be selected for the garments. Both types are inherently static-dissipative materials to prevent electrical discharges that can damage sensitive hardware or initiate explosions in the presence of flammable vapors. The material specified for “hazardous environments” is flame resistant and provides additional protection to the wearer. Selection of garment design and fabric should be based on the user''s needs with respect to functional and environmental requirements. 1.4 Additional, background information can be found in SD-TR-91-26 and IEST-RP-CC003.3. 1.5 This standard is intended to be in compliance with the ASTM policy on Fire Standards.2 Flammability tests specified in this standard should be used to measure and describe the properties of fabrics in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fabrics under actual fire conditions. However, results of the tests may be used as elements of a fire risk assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of operations in controlled environment areas. 1.6 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations

ASTM D3655-13e1 男士及女士用梳条编织外衣和夹克织物的标准性能规范

4.1 Upon mutual agreement between the purchaser and the seller, woven fabrics intended for this end use should meet all of the requirements listed in Table 1 of this specification. 4.2 It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in Table 1 may be modified by mutual agreement between the purchaser and the seller. 4.2.1 In such cases, any references to the specification shall specify that: This fabric meets ASTM Specification D3655 except for the following characteristic(s). 4.3 Where no prepurchase agreement has been reached between the purchaser and the seller, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 4.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric. 4.4 The uses and significance of particular properties and test methods are discussed in the appropriate sections of the specified test methods. 1.1 This performance specification covers men''s and women''s sliver knitted overcoat and jacket fabrics composed of any textile fiber or mixture of textile fibers. 1.2 This performance specification is not applicable to knitted fabrics used for interlinings. 1.3 These requirements apply to the length and width directions for those properties where fabric direction is pertinent. 1.4 The following safety hazards caveat pertains only to the test methods portion, Section 7, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Men''s and Women''s Sliver Knitted Overcoat and Jacket Fabrics

EN 13402-3:2013 服装型号的名称与符号.第3部分:测量方法和间隔期

This European Standard establishes tables for body measurements and intervals to be used for compiling standard garment sizes for men, women, boys, girls and infants. Garment dimensions are not contained in this document. Examples of labelling clothing with the standard pictogram (see EN 13402-1) are given in Annex A (informative) in this document.

Size designation of clothes - Part 3: Body measurements and intervals (Remains Current)

ASTM D7022-13 服饰相关标准术语

1.1 This standard is the compilation of all terminology developed by Subcommittee D13.61 on Apparel. 1.2 This terminology is unique to the Apparel industry. Meanings of the same terms used outside the industry can be found in other compilations or in dictionaries of general usage. 1.3 In addition to being a specialized dictionary, D7022 is also useful for managing the Subcommittee''s terminology. 1.4 Terms listed are under the jurisdiction of Subcommittee D13.61. 1.5 For definitions of other textile terms see Terminology D123.

Standard Terminology Relating to Apparel

ASTM F1959/F1959M-13 测定服装材料电弧额定值的标准试验方法

5.1 This test method is intended for the determination of the arc rating of a material, or a combination of materials. 5.1.1 Because of the variability of the arc exposure, different heat transmission values may be observed at individual sensors. Evaluate the results of each sensor in accordance with Section 12. 5.2 This test method maintains the specimen in a static, vertical position and does not involve movement except that resulting from the exposure. 5.3 This test method specifies a standard set of exposure conditions. Different exposure conditions may produce different results. In addition to the standard set of exposure conditions, other conditions representative of the expected hazard may be used and shall be documented in the reporting of the testing results. 1.1 This test method is used to measure the arc rating of materials intended for use as flame resistant clothing for workers exposed to electric arcs that would generate heat flux rates from 84 to 25 120 kW/m28201;[2 to 600 cal/cm2s]. 1.2 This test method will measure the arc rating of materials which meet the following requirements: less than 150 mm [6 in.] char length and less than 2 s afterflame when tested in accordance with Test Method D6413. 1.2.1 It is not the intent of this test method to evaluate non flame-resistant materials except where used as under layers in multiple-layer specimens. 1.3 The materials used in this test method are in the form of flat specimens. 1.4 This test method shall be used to measure and describe the properties of materials, products, or assemblies in response to convective and radiant energy generated by an electric arc under controlled laboratory conditions. 1.5 The values stated in SI units shall be regarded as standard except as noted. Within the text, alternate units are shown in brackets. The values stated in each system may not be exact equivalents therefore alternate systems must be used independently of the other. Combining values from the systems described in the text may result in nonconformance with the method. 1.6 This test method does not apply to electrical contact or electrical shock hazards. 1.7 This standard shall not be used to describe or appraise the fire hazard or fire risk of materials, products, or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use. For specific precautions, see Section 7.

Standard Test Method for Determining the Arc Rating of Materials for Clothing

ASTM D3785-13 机织领带及围巾织物的标准性能规格

5.1 Upon mutual agreement between the purchaser and the seller, woven fabrics intended for this end use should meet all of the requirements listed in Table 1 of this specification. 5.2 It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in Table 1 may be modified by mutual agreement between the purchaser and the seller. 5.2.1 In such cases, any references to the specification shall specify that: This fabric meets ASTM Specification D3785 except for the following characteristic(s). 5.3 Where no prepurchase agreement has been reached between the purchaser and the seller, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 5.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric. 5.4 The significance and use of particular properties and test methods are discussed in the appropriate sections of the specified test methods. 1.1 This performance specification covers woven necktie and scarf fabrics composed of any textile fiber or mixture of textile fibers. 1.2 This performance specification is not applicable to woven fabrics used for interlinings. 1.3 These requirements apply to the length and width directions for those properties where fabric direction is pertinent. 1.3.1 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 The following precautionary caveat pertains only to the test methods portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Woven Necktie and Scarf Fabrics

ASTM F2907-13b 吊带式背带的标准消费品安全规范

1.1 This consumer safety specification establishes performance requirements, test methods and marking requirements to promote safe use of sling carriers. 1.2 This consumer safety specification is intended to minimize the risk of injury to an occupant from the normal use and reasonably foreseeable misuse of products. 1.3 For purposes of definition, a sling carrier is a product of fabric or sewn fabric construction, which is designed to contain a child in an upright or reclined position while being supported by the caregiver’s torso. In general, the child will be between full term birth and 35 lb (15.9 kg).Note 1—Slings consist of a variety of unstructured designs ranging from a hammock-shaped product suspended on the caregiver’s upper torso to a long length of material wrapped around the caregiver’s body. 1.4 The sling carrier is normally “worn” by the caregiver, and thus the child is supported from one or both shoulders of the caregiver. These products are worn on the front, hip or back of the caregiver, with the child either facing towards or away from the caregiver or reclined on the front only of the caregiver. 1.5 No sling carrier produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with the specification unless it complies with all of the requirements contained herein. 1.6 This consumer safety specification is not intended to address incidents and injuries resulting from the interaction of other persons or objects with the caregiver and child while the sling carrier is in use. 1.7 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Consumer Safety Specification for Sling Carriers

ASTM D3655-13 男士及女士用梳条编织外衣和夹克织物的标准性能规范

4.1 Upon mutual agreement between the purchaser and the seller, woven fabrics intended for this end use should meet all of the requirements listed in Table 1 of this specification.Note 1—The classes of colorfastness in the AATCC methods referenced in this table are based on a numerical scale of 5 for negligible or no color change or color transfer to 1 for very severe color change or color transfer. 4.2 It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in Table 1 may be modified by mutual agreement between the purchaser and the seller. 4.2.1 In such cases, any references to the specification shall specify that: This fabric meets ASTM Specification D3655 except for the following characteristic(s). 4.3 Where no prepurchase agreement has been reached between the purchaser and the seller, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 4.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric. 4.4 The uses and significance of particular properties and test methods are discussed in the appropriate sections of the specified test methods. 1.1 This performance specification covers men''s and women''s sliver knitted overcoat and jacket fabrics composed of any textile fiber or mixture of textile fibers. 1.2 This performance specification is not applicable to knitted fabrics used for interlinings. 1.3 These requirements apply to the length and width directions for those properties where fabric direction is pertinent. 1.4 The following safety hazards caveat pertains only to the test methods portion, Section 7, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Men''s and Women''s Sliver Knitted Overcoat and Jacket Fabrics

FZ/T 81007-2012 单、夹服装

本标准规定了单、夹服装的要求、检测方法、检验分类规则，以及标志、包装、运输和贮存等全部技术特征。 本标准适用于以纺织机织物为主要面料生产的单、夹服装。 本标准不适用于年龄在36个月及以下的婴幼儿服装。

Casual wear

FZ/T 81017-2012 非粘合衬西服

本标准规定了非粘合衬西服的术语和定义、要求、检测方法、检验分类规则，以及标志、包装、运输和贮存等全部技术特征。 本标准适用于以毛、毛混纺、仿毛等纺织机织物为主要面料生产的非粘合衬西服。

Suits with no fusible interlining

FZ/T 81004-2012 连衣裙、裙套

本标准规定了裙子、连衣裙和裙套的要求、检测方法、检验分类规则、以及标志、包装、运输和贮存等全部技术特征。 本标准适用于以纺织机织物为主要面料生产的裙子、连衣裙和裙套等。 本标准不适用于年龄在36个月及以下的婴幼儿服装。

Dress and lady suit

SN/T 3317.9-2012 进出口纺织品质量安全风险评估规范 第9部分：服装

SN/T 3317的本部分规定了进出口服装质量安全风险评估的程序、内容、要求和动态调整的方法。本部分适用于进出口服装在正常贸易、使用、消费和可预见的误用过程中的风险评估。

Risk assessment specification of safety in textiles for import and export.Part 9:Clothing

SN/T 3332-2012 进出口纺织服装中聚氯乙烯的定性鉴别方法

警告：使用本标准的人员应有正规实验室工作的实践经验。本标准并未指出所有可能的安全问题。使用者有责任采取适当的安全和健康措施，并保证符合国家有关法规规定的条件。 范围：本标准规定了纺织服装中聚氯乙烯（PVC）的火焰呈色和红外光谱定性鉴别方法。 本部分适用于纺织服装中涂层织物、塑料附件等疑似含有PVC的样品的定性鉴别。

Test method for qualitative identification of polyvinyl chloride in textiles and garments for import and export

DB35/T 728-2012 立领男套装

本标准规定了立领男套装的要求、检测方法、检验分类规则，以及标志、包装、运输和贮存等全部技术特征。 本标准适用于以纺织机织物为主要面料生产的立领男套装。 本标准不适用于年龄在36个月及以下的婴幼儿服装。

men's stand collar suit

NF G08-005:2012 纺织品.为工业洗涤的工作服加标签的资格符号

Textiles - Qualification symbols for labelling workwear to be industrially laundered

NF D90-224:2012 睡袋的要求.

Requirements for sleeping bags.