Y80 家具综合 标准查询与下载

DIN EN 16122:2012 住宅用和非住宅用储存设备.强度,耐久性和稳定性测定试验方法.德文版本EN 16122-2012

Domestic and non-domestic storage furniture - Test methods for the determination of strength, durability and stability; German version EN 16122:2012

BS EN 1728:2012 家具.座椅.强度和耐久性测定的试验方法

Furniture. Seating. Test methods for the determination of strength and durability

DB31/T 602-2012 红木家具零售经营企业服务规范

Redwood furniture retail business service specification

BS EN 14175-7:2012 通风橱.高温和强酸性负载用通风橱

Fume cupboards. Fume cupboards for high heat and acidic load

NF D62-015-1:2012 家具.家用双层床和高床.第1部分:安全性、强度和耐久性要求

Furniture - Bunk beds and high beds - Part 1 : safety, strength and durability requirements.

DIN EN 13759:2012 家具.座位和沙发床用操作机构.试验方法.德文版本EN 13759-2012

Furniture - Operating mechanisms for seating and sofa-beds - Test methods; German version EN 13759:2012

BS EN 747-2:2012 家具.家用双层床和高床.试验方法

Furniture. Bunk beds and high beds. Test methods

BS EN 747-1:2012 家具.家用双层床和高床.安全性、强度和耐久性要求

Furniture. Bunk beds and high beds. Safety, strength and durability requirements

BS EN 15186:2012 家具.表面耐划痕评定

Furniture. Assessment of the surface resistance to scratching

BS EN 1930:2011 儿童使用和保育用品.安全护栏.安全要求和试验方法

Child use and care articles. Safety barriers. Safety requirements and test methods

JIS S 1200:2012 家具.存储单元件.强度和耐用性测定

Furniture -- Storage units -- Determination of strength and durability

ASTM E1537-12 软垫家具着火试验的标准试验方法

This test method provides a means to measure a variety of fire-test-response characteristics resulting from burning a specimen of upholstered furniture. The upholstered furniture specimen is allowed to burn freely under well-ventilated conditions after ignition using a propane gas burner. The most important fire-test-response characteristic measured is the rate of heat release, which quantifies the intensity of the fire generated. The rate of heat release is measured by the principle of oxygen consumption. The assumptions and limitations of oxygen depletion calorimetry are discussed in Annex A4, and in particular in A4.1.2. Other fire-test-response characteristics are measured, namely smoke obscuration and combustion gas release, as they are also important in making decisions on fire safety. The most important gaseous components of smoke are the carbon oxides, present in all fires. They are indicators of the toxicity of the atmosphere and of the completeness of combustion. Measurement of concentrations of carbon oxides are useful for two purposes: as part of fire hazard assessment calculations and to improve the accuracy of heat release measurements. Other toxic combustion gases, which are specific to certain materials, are less crucial for determining combustion completeness and are optional measures, but fire hazard assessment often requires their measurement. The type of ignition chosen (a flaming source) is common in both accidental and intentional fires in public occupancies. This test method is thus applicable to upholstered furniture in public occupancies. Such facilities include, but are not limited to, jails, prisons, nursing care homes, health care facilities, public auditoriums, hotels, and motels. It has been shown that if the gas burner is used at a flow rate of 13 L/min for 80 s (equivalent to 19.3 kW), as is the case in California Technical Bulletin (CA TB) 133, it approximates the ignition propensity of five crumpled sheets of newspaper located on the seating cushion. This test method specifies both a particular flow rate of propane gas and a period of gas flow. If the ignition conditions are changed, the results would then deviate from the model selected for this test. This test method is not applicable to ignition of upholstered furniture by cigarettes. One of the following three test configurations is to be used in this test method: A8212;A test room with the following dimensions: 3.66 by 2.44 by 2.44 m high. B8212;A test room with the following dimensions: 3.66 by 3.05 by 2.44 m high. C8212;An open calorimeter (or furniture calorimeter). Measurements in the three test configurations listed in 5.9 have been shown to give similar results for heat release in the duct, for heat release rates lower than 600 kW (see X1.4) (1). Measurements of temperatures, gas concentrations, and smoke obscuration in the room, which are optional in this test method, are dependent on room size. This test method has been designed to give details for the means to build and operate equipment capable of running tests as required by CA TB 133. This test method is, however, more general than that technical bulletin. 1.1 This is a fire-test-response standard. 1.2 The purpose of this test method is to determine the burning behavior of upholstered furniture used in public occupancies by measuring specific fire-test responses when the specimen of furniture is subjected to a specified flaming ignition source under well-ventilated conditions. 1.3 Data are obtained describing the burning behavior from a specific ignition source until all burning has ceased, a p......

Standard Test Method for Fire Testing of Upholstered Furniture

ANSI/BIFMA e3 (i13)-2012 家具可持续性标准

Furniture Sustainability Standard

ANSI/BIFMA X5.9-2012 储物柜.试验

This standard is intended to provide a common basis for evaluating the safety, durability and structural performance of storage units.

Storage Units - Tests

DB35/T 741-2011 古典工艺家具

本标准规定了古典工艺家具的术语和定义、产品命名与分类、主要尺寸、要求、试验方法、检验规则及标识标注、包装、运输和贮存的要求。 本标准适用于以深色名贵硬木制作的古典工艺家具

Classic craft furniture

SN/T 3068-2011 出境木家具检验检疫操作规程

本标准规定了出境木家具的检验检疫方法和结果判定工作程序。 本标准适用于出境木家具的检验检疫。

Rules for the inspection and quarantine of export wooden furniture

SN/T 3026-2011 木制品和家具产品中甲醛释放量的测定气候箱法

本标准规定了木制品和家具产品中甲醛释放量的检测方法—气候箱法。 本标准适用于木制品和家具产品中甲醛释放量的测定。

Determination of formaldehyde emission from wood products and furniture.Large chamber method

DIN CEN/TS 16209:2011 家具.家具表面性能分类;德文版本EN/TS 16209-2011

Furniture - Classification for properties for furniture surfaces; German version CEN/TS 16209:2011

DIN EN 527-1:2011 办公家具.工作台和写字台.第1部分:尺寸规格.德文版本EN 527-1-2011

This European Standard specifies dimensions of work tables and desks for office tasks to be undertaken in a seated, a sit stand or standing position. It includes neither dimensions for storage unit nor those for other tables in the office area or reception desks.

Office furniture - Work tables and desks - Part 1: Dimensions; German version EN 527-1:2011

BS DD CEN/TS 16209:2011 家具.家具表面特性分类

This Technical Specification specifies a system for the classification of the resistance to:  Dry heat  Wet heat  Cold liquids  Abrasion  Scratching For resistance to dry heat, resistance to wet heat, and resistance to cold liquids, this Technical Specification applies to all furniture surfaces regardless of materials, except finishes on leather and fabrics. The classification for the surface resistance to abrasion applies to foil, laminate, melamine faced boards, pigmented and transparent coatings. It does not apply to the surfaces covered by EN 14434. The classification for the surface resistance to scratching has two methods, A and B. Method A applies to all types of surface coatings and coverings except for melamine faced boards and HPL. Method B applies to all types of surfaces. It does not apply to finishes on leather and fabrics.

Furniture. Classification for properties for furniture surfaces