Y80 家具综合 标准查询与下载

DIN EN 15185:2011 家具.表面耐磨性能评估;德文版本EN 15185-2011

This European Standard specifies a method for the assessment of the abrasion resistance of surfaces referred to under 7.4. It does not apply to leather and textile surfaces. It does not apply to the surfaces covered by EN 14434. The test is intended to be carried out on a part of the finished furniture, but can be carried out on test panels of the same material, finished in an identical manner to the finished product, and of a size sufficient to meet the requirements of the test. The test shall be carried out on unused surfaces.

Furniture - Assessment of the surface resistance to abrasion; German version EN 15185:2011

BS EN 15185:2011 家具.表面耐摩擦性评定

This European Standard specifies a method for the assessment of the abrasion resistance of surfaces referred to under 7.4. It does not apply to leather and textile surfaces. It does not apply to the surfaces covered by EN 14434. The test is intended to be carried out on a part of the finished furniture, but can be carried out on test panels of the same material, finished in an identical manner to the finished product, and of a size sufficient to meet the requirements of the test. The test shall be carried out on unused surfaces.

Furniture. Assessment of the surface resistance to abrasion

BS EN 12227:2010 家用婴儿围栏.试验方法和安全性要求

Playpens for domestic use. Safety requirements and test methods

DIN EN ISO 8130-5:2011 家具面.第5部分:粉末空气混合物流动性的测定(ISO 8130-5-1992);德文版本EN ISO 8130-5-2010

Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:1992); German version EN ISO 8130-5:2010

DIN EN ISO 8130-12:2011 家具面.第12部分:兼容性测定(ISO 8130-12-1998);德文版本EN ISO 8130-12-2010

Coating powders - Part 12: Determination of compatibility (ISO 8130-12:1998); German version EN ISO 8130-12:2010

DIN EN ISO 8130-4:2011 家具面.第4部分:爆炸下限值的计算(ISO 8130-4-1992,包括Cor.1-1993);德文版本EN ISO 8130-4-2010

This part of ISO 8130 specifies a method for the calculation of the lower explosion limit of a coating powerder, i.e. the minimum concentration of the coating powder in air which will form an explosive mixture. It is vased on the lnowledge of the gross calorific value of the product, as determined by the method described in ISO 1928 or on the gross calorific values of the constituents of the product.

Coating powders - Part 4: Calculation of lower explosion limit (ISO 8130-4:1992, including Cor. 1:1993); German version EN ISO 8130-4:2010

ANSI/ASTM F1178:2011 上釉系统、烘干、金属连接件装置和家具的性能规范

Specification For Performance Of Enameling System, Baking, Metal Joiner Work And Furniture

DIN 68861-4:2011 家具面.第4部分:划痕处的性能

Furniture surfaces - Part 4: Behaviour at scratches

DIN 68861-1:2011 家具表面.第1部分:化学影响下的性能

Furniture surfaces - Part 1: Behaviour at chemical influence

ANSI/BIFMA M7.1-2011 判定办公设备,通风组件和座椅排放的挥发性有机化合物的标准试验方法

The standard Test Method is intended for determining volatile organic compound (VOCs including aldehydes) emissions from office furniture and seating under environmental and product usage conditions that are typical of those found in buildings.

Standard Test Method for Determining VOC Emissions from Office Furniture Systems, Components and Seating

ANSI/BIFMA X5.1-2011 通用办公椅.试验

This standard is intended to provide manufacturers, specifiers, and users with a common basis for evaluating the safety, durability, and structural adequacy of general-purpose office chairs. General-purpose office chairs are normally used in an office environment and may include, but are not limited to those seating styles typically referred to as: executive/management, task/secretarial, side/guest chairs, stacking chairs, tablet arm chairs and stools.

General-Purpose Office Chairs - Tests

ANSI/BIFMA X7.1-2011 低排放办公设备和座椅的甲醛和挥发性有机化合物排放标准

This standard is intended to provide performance requirements for the emissions of volatile organic compounds (VOCs), including Formaldehyde and Aldehydes, from Office Furniture and Seating. This standard specifies acceptance levels that define low-emitting furniture independent of construction materials, manufacturing processes, mechanical designs, or aesthetic designs. This standard is intended to apply to a newly manufactured product and does not apply to products that have been in use.

Standard for Formaldehyde and TVOC Emissions of Low-Emitting Office Furniture and Seating

DIN EN 12227:2010 家用婴儿游戏围栏.安全性要求和试验方法;德文版本EN 12227-2010

Playpens for domestic use - Safety requirements and test methods; German version EN 12227:2010

DB44/T 824-2010 办公家具 木制多媒体会议台

本标准规定了木制多媒体会议台的术语和定义、产品分类、要求、试验方法、检验规则及标志、使用说明书、包装、运输、贮存。 本标准适用于主要部件由木材或木质人造板制成的木制多媒体会议台(以下简称会议台)。

Office Furniture Wooden Multimedia Conference Table

KS G ISO 4481:2010 刀具和盘碟.命名.三种语言版

이 표준은 영어, 프랑스어, 러시아어로 되어 있는 날붙이와 식기류의 용어에 대하여 규정한다

Cutlery and flatware-Nomenclature

NF D61-002:2010 家具.强度,耐久性和安全性.家用座椅的要求

Furniture - Strength, durability and safety - Requirements for domestic seating.

EN 16121:2010 非家用储藏家具.安全性,强度,耐久性和稳定性的要求

Non-domestic storage furniture - Requirements for safety, strength, durability and stability

DIN EN 12521:2010 家具.强度、耐用性和安全性.家用桌子的要求.德文版本EN 12521-2009

This European standard specifies the minimum requirements for the safety, strength and durability of all types of domestic tables including those with glass in their construction. It does not apply to office tables or desks, tables for non-domestic use, tables for educational institutions and outdoor tables for which EN standards exist.

Furniture - Strength, durability and safety - Requirements for domestic tables; German version EN 12521:2009

NF D62-100-2:2010 家具.家用固定板夹层床.试验和安全性规范.第2部分:试验方法

Furniture - Domestic use fixed platform mezzanine beds - Safety specifications and tests - Part 2 : test methods.

SN/T 2500-2010 进出口木制品、家具检验规程 抽样与制样

本标准规定了进出口木制品、家具的安全卫生环保性能(含有毒有害物质、物理机械安全性能和阻燃性能)、常规物理性能、外观质量和规格尺寸检验项目的抽样、制样方法与要求。 本标准适用于以木质材料为主要原料的进出口木制品、家具的安全卫生环保性能(含有毒有害物质、物理机械安全性能和阻燃性能)、常规物理性能、外观质量和规格尺寸检验等项目的抽样和制样。

Rules for inspection of wood products and furniture for import and export-Sampling and sample preparation