A69 工程技术特性标准物质 标准查询与下载



共找到 49 条与 工程技术特性标准物质 相关的标准,共 4

Standard test blocks for ultrasonic testing -- Part 2: A7963 Standard Test Block

ICS
19.100;25.160.40
CCS
A69
发布
2018-12-20
实施

Standard test blocks for ultrasonic testing -- Part 4: Standard test blocks for angle beam ultrasonic testing

ICS
19.100;25.160.40
CCS
A69
发布
2018-12-20
实施

Standard test blocks for ultrasonic testing -- Part 1: A1 Standard Test Block

ICS
19.100;25.160.40
CCS
A69
发布
2018-12-20
实施

Rockwell hardness test -- Calibration of reference blocks

ICS
19.060;77.040.10
CCS
A69
发布
2017-08-21
实施

Brinell hardness test -- Calibration of reference blocks

ICS
77.040.10
CCS
A69
发布
2017-08-21
实施

This Japanese Industrial Standard specifies the calibration method of the hardness reference blocks to be used for the indirect verification and the daily accuracy control of the testing machine for the Vickers hardness test specified in JIS B 7725.

Vickers hardness test -- Calibration of reference blocks

ICS
19.060;77.040.10
CCS
A69
发布
2010-08-20
实施

Rockwell hardness test -- Calibration of reference blocks

ICS
19.060;77.040.10
CCS
A69
发布
2010-08-20
实施

Laboratories performing petroleum test methods can use this practice to set an acceptable tolerance zone for infrequent testing of CS or CCS material, based on ε, and a desired Type I error, for the purpose of ascertaining if the test method is being performed without bias. This practice can be used to estimate the power of correctly detecting bias of different magnitudes, using the acceptable tolerance zone set in 4.1, and hence, gain insight into the limitation of the true bias detection capability associated with this acceptable tolerance zone. With this insight, trade-offs can be made between desired Type I error versus desired bias detection capability to suit specific business needs. The CS testing activities described in this practice are intended to augment and not replace the regular statistical monitoring of test method performance as described in Practice D 6299.1.1 This practice covers a methodology for establishing an acceptable tolerance zone for the difference between the result obtained from a single implementation of a test method on a CS and its ARV, based on user-specified Type I error, the user-established test method precision, the standard error of the ARV, and a presumed hypothesis that the laboratory is performing the test method without bias. Note 18212;Throughout this practice, the term user refers to the user of this practice; and the term laboratory (see 1.1) refers to the organization or entity that is performing the test method. 1.2 For the tolerance zone established in 1.1, a methodology is presented to estimate the probability that the single test result will fall outside the zone, in the event that there is a bias (positive or negative) of a user-specified magnitude that is deemed to be of practical concern (that is, the presumed hypothesis is not true). 1.3 This practice is intended for ASTM Committee D02 test methods that produce results on a continuous numerical scale. 1.4 This practice assumes that the normal (Gaussian) model is adequate for the description and prediction of measurement system behavior when it is in a state of statistical control. Note 28212;While this practice does not cover scenarios in which multiple results are obtained on the same CS under site precision or repeatability conditions, the statistical concepts presented are applicable. Users wishing to apply these concepts for the scenarios described are advised to consult a statistician and to reference the CS methodology described in Practice D 6299.

Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material

ICS
19.020 (Test conditions and procedures in general)
CCS
A69
发布
2008
实施

The uses of certified reference materials (CRMs) and their correct applications.

Uses of certified reference materials

ICS
71.040.30
CCS
A69
发布
2007-05-25
实施

Assists producers in the preparation of clear and concise certificates to accompany certified reference materials. Such certificates, while their essential character, should help to provide, in summary form, all the information needed by the user of the

Reference materials - Contents of certificates and labels

ICS
17.020
CCS
A69
发布
2007-05-25
实施

이 규격에서는 가속 수명 시험의 설계와 데이터 분석을 위해 필요한 기본 개념을 제시한다.

Accelerated life test-Part 1:Outline of accelerated life test

ICS
19.080
CCS
A69
发布
2006-06-02
实施
2006-06-02

이 규격에서는 힘, 토크, 압력, 모멘트 등 기계적 부하에 의하여 파괴, 마모, 열화, 부

Design of durability test for mechanical components

ICS
21.020
CCS
A69
发布
2006-06-02
实施
2006-06-02

이 규격에서는 가속 수명 시험 데이터 분석을 위한 절차와 방법을 제시한다.

Accelerated life test-Part 3:Data analysis of accelerated life test

ICS
19.080
CCS
A69
发布
2006-06-02
实施
2006-06-02

금속, 섬유, 고무, 플라스틱 등 시간에 따라 성능이 열화되는 아이템의 신뢰성 목표를 성능

Reliability assurance by performance characteristic degrading over time

ICS
03.120.01
CCS
A69
发布
2006-06-02
实施
2006-06-02

이 규격에서는 가속 수명 시험의 설계를 위해 필요한 절차를 제시한다.

Accelerated life test-Part 2:Design of accelerated life test

ICS
19.080
CCS
A69
发布
2006-06-02
实施
2006-06-02

This International Standard defines the characteristics and use of a standard atmosphere for conditioning, for determining the physical and mechanical properties of textiles and a standard alternative atmosphere that may be used if agreed between parties.

Textiles - Standard atmospheres for conditioning and testing

ICS
59.080.01
CCS
A69
发布
2005-01
实施

Laboratories performing petroleum test methods can use this practice to set an acceptable tolerance zone for infrequent testing of CS or CCS material, based on ε, and a desired Type I error, for the purpose of ascertaining if the test method is being performed without bias. This practice can be used to estimate the power of correctly detecting bias of different magnitudes, using the acceptable tolerance zone set in 4.1, and hence, gain insight into the limitation of the true bias detection capability associated with this acceptable tolerance zone. With this insight, trade-offs can be made between desired Type I error versus desired bias detection capability to suit specific business needs. The CS testing activities described in this practice are intended to augment and not replace the regular statistical monitoring of test method performance as described in Practice D 6299.1.1 This practice covers a methodology for establishing an acceptable tolerance zone for the difference between the result obtained from a single implementation of a test method on a CS and its ARV, based on user-specified Type I error, the user-established test method precision, the standard error of the ARV, and a presumed hypothesis that the laboratory is performing the test method without bias.Note 1Throughout this practice, the term user refers to the user of this practice; and the term laboratory (see ) refers to the organization or entity that is performing the test method.1.2 For the tolerance zone established in , a methodology is presented to estimate the probability that the single test result will fall outside the zone, in the event that there is a bias (positive or negative) of a user-specified magnitude that is deemed to be of practical concern (that is, the presumed hypothesis is not true).1.3 This practice is intended for ASTM Committee D02 test methods that produce results on a continuous numerical scale.1.4 This practice assumes that the normal (Gaussian) model is adequate for the description and prediction of measurement system behavior when it is in a state of statistical control.Note 2While this practice does not cover scenarios in which multiple results are obtained on the same CS under site precision or repeatability conditions, the statistical concepts presented are applicable. Users wishing to apply these concepts for the scenarios described are advised to consult a statistician and to reference the CS methodology described in Practice D 6299.1.5 Software program SiteBias, Version 1.0.1 (ADJD6617) performs the necessary calculations prescribed by this practice.

Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material

ICS
19.020 (Test conditions and procedures in general)
CCS
A69
发布
2005
实施

ERRATUM

ICS
CCS
A69
发布
2003-12-09
实施

이 규격은 강 용접부의 초음파 탐상 검사를 위한 장비의 교정에 사용되는 대비 시험편의

Welds in steel-Reference block for the calibration of equipment for ultrasonic examination

ICS
25.160.40
CCS
A69
发布
2002-12-12
实施
2002-12-12

この規格は,認証標準物質の使い方及びその正しい適用を提供する。

Uses of certified reference materials

ICS
03.120.10;71.040.30
CCS
A69
发布
2002-03-20
实施



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号