共找到 68 条与 添加剂 相关的标准,共 5 页
本文件规定了溢油分散剂的分类、技术要求、试验方法、检验规则、标志、标签和使用说明书、包装和贮存等要求。 本文件适用于溢油分散剂产品生产、检验、合格判定等。
Oil spill dispersant—Part 1:Technical requirements
Detergent additive for motor gasoline
本标准规定了柴油清净剂的术语和定义、要求和试验方法、检验规则、标志、包装、运输和储存、安全。 本标准适用于车用柴油、普通柴油和生物柴油调合燃料(B5)等柴油发动机燃料中使用的清净剂。
Detergent additive for diesel fuel
本标准规定了溢油分散剂的分类、性能指标、试验方法、检验规则、标志、标签、使用说明书、包装、贮存和过期产品处置等要求。 本标准适用于在中华人民共和国管辖水域内使用的溢油分散剂。
Oil spill dispersant-Technical regulations
Oil spill dispersant--Application criteria
Oil spill dispersant--Technical regulations
本标准规定了汽车燃油节能添加剂的节能试验评定方法。 本标准适用于汽车燃油节能添加剂。
Test and evaluation methods on fuel-saving additives of auto-fuel
本标准规定了对汽车发动机润滑油节能添加剂的试验评定方法。 本标准适用于汽车发动机润滑油节能添加剂。
Test and evaluation methods on fuel-saving additives of auto-engine oil
Diese Internationale Norm legt die Anforderungen an eine Reihe von Kugelhähnen aus Metall fest, die für den Einsatz in Anlagen der Erdöl-, petrochemischen, Erdgas- und verwandten Industrien geeignet sind. Sie gilt für Armaturen mit den Nennweiten DN 8; 10; 15; 20; 25; 32; 40; 50; 65; 80; 100; 150; 200; 250; 300; 350; 400; 450; 500; 600 entsprechend den Rohr-Nennweiten NPS 1/4; 38; 1/2; -; 1; 1 1/4; 1 1/2; 2; 2 1/2; 3; 4; 6; 8; 10; 12; 14; 16; 18; 20; 24 und für folgende Druckbezeichnungen Class 150; 300; 600; 800 (Class 800 gilt nur für Armaturen mit Gewinde- und Schweißmuffenenden); PN 16; 25; 40; 63; 100. Die Norm enthält Festlegungen zur Prüfung und Inspektion sowie zu folgenden Armaturen-Merkmalen: Flansch- und Anschweißenden: in den Nennweiten 15 DN 600 (1/2 NPS 24); Schweißmuffen- und Gewindeenden: in den Nennweiten 8 DN 50 (1/4 NPS 2); Gehäusesitzöffnungen mit vollem, reduziertem oder zweifach reduziertem Durchgang; Werkstoffe.
Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015)
本标准规定了酸性油气田用缓蚀剂性能的实验室评价方法。 本标准适用于含硫化氢、二氧化碳油气田用缓蚀剂性能的实验室评价,其他油气田用缓蚀剂性能的实验室评价也可参照执行。
Laboratory evaluation methods for performance of corrosion inhibitors used in sour oil and gas fields
本标准规定了用不同烯烃与苯烷基化得到的合成烷基苯为原料,经磺化、金属化制得的合成烷基苯磺酸钙清净剂的分类、要求和试验方法、检验规则及标志、包装、运输和贮存。本标准适用于调制不同牌号内燃机油的合成烷基苯磺酸钙清净剂。
Synthetic alkylbenzene calcium sulfonate detergents
本标准适用于重庆市范围内现有固定污染源的排放管理,以及新、改、扩建项目的环境影响评价、建设项目环境保护设施设计、竣工验收及其投产后的排放管理。
Comprehensive Emission Standards of Air Pollutants in Chongqing
Although many additive manufacturing systems are based heavily upon the principles of Computer Numerical Control (CNC), the coordinate systems and nomenclature specific to CNC are not sufficient to be applicable across the full spectrum of additive manufacturing equipment. This terminology expands upon the principles of ISO 841 and applies them specifically to additive manufacturing. Although this terminology is intended to complement ISO 841, if there should arise any conflict, this terminology shall have priority for additive manufacturing applications. For any issues not covered in this terminology, the principles in ISO 841 may be applied. Furthermore, this terminology does not prescribe the use of any specific existing testing methodologies or standards that practitioners of AM may wish to employ for testing purposes; however, it is expected that practitioners will employ appropriate existing methodologies and standards to test parts made by AM.1.1 This terminology includes terms, definitions of terms, descriptions of terms, nomenclature, and acronyms associated with coordinate systems and testing methodologies for additive manufacturing (AM) technologies in an effort to standardize terminology used by AM users, producers, researchers, educators, press/media, and others, particularly when reporting results from testing of parts made on AM systems. Terms included cover definitions for machines/systems and their coordinate systems plus the location and orientation of parts. It is intended, where possible, to be compliant with ISO 841 and to clarify the specific adaptation of those principles to additive manufacturing. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Terminology for Additive Manufacturing
The methods described in this International Standard concern the detection and determination of specified additives in unused and used mineral insulating oils. The detection methods may be applied to assess whether or not a mineral insulating oil contains an additive as specified by the supplier. The determination methods are used for the quantitative determination of additives known to be present or previously detected by the appropriate detection method.
Detection and determination of specified additives in mineral insulating oils
本标准规定了用乙烯丙烯共聚物为原料,在 HVI150 或 HVI100 基础油(见附录 F)中经热溶解、机械降解或热氧化降解制得的粘度指数改进剂系列产品的术语和定义、分类、要求和试验方法、检验规则、标志、包装、运输和贮存。 本标准所属产品适用于调制多级内燃机油。
Ethylene propylene copolymer viscosity index improver
This test method describes a procedure for determining free (uncombined) alkali or acid in soap products.
M閠hodes d抏ssai des produits p閠roliers et produits connexes 蓈aluation visuelle de la turbidit?des mazouts distill閟
Methods of Testing Petroleum and Associated Products CGSB Cetane Index of Diesel Fuels
Methods of Testing Petroleum and Associated Products CGSB Cetane Index of Diesel Fuels
本标准规定了以精制石油酸作为喷气燃料抗磨添加剂的技术要求和试验方法、检验规则及标志、包装、运输和贮存。 本标准所属产品适用于喷气燃料。
Antiwear additive for jet fuels T1602
Methods of Testing Petroleum and Associated Products Determination of Lead in Automotive Gasoline (Atomic Absorption)
Methodes D'Essai Des Produits Petroliers Et Produits Connexes Dosage Du Plomb Dans L'Essence Pour Automobiles (Spectrophotometrie D'Absorption Atomique)
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号