共找到 81 条与 核设施的辐射安全 相关的标准,共 6 页
本文件规定了压水堆核电厂控制区门窗辐射防护功能要求和设计准则。 本文件适用于压水堆核电厂控制区门窗辐射防护设计,其他类型核电厂参考执行。
Design criteria for radiation protection of doors and windows in the control area of pressurized water reactor nuclear power plants
本文件规定了压水堆核电厂在事故工况下核岛厂房工作人员安全辐射防护设计、设备和仪表的辐射环境要求、事故工况下辐射分区以及监测仪表阈值等方面遵循的原则、方法和假设条件。 本文件适用于压水堆核电厂事故工况下核岛厂房的辐射防护设计,其他堆型参照执行。
Radiation protection design criterion for nuclear island building under accident condition of presssurized water reactor nuclear power plant
本文件规定了压水堆核电厂运行状态下流出物排放源项分析的通用原则,以及氚、C、裂变产物和腐蚀活化产物的排放源项分析准则。 本文件适用于评价压水堆核电厂放射性核素通过液态和气态流出物向环境的年排放量。
Radioactive source term of pressurized water reactor nuclear power plant for operation states
本标准规定了核设施运行和退役中产生的钢铁、铝、镍和铜材料,设备和工具再循环再利用的清洁解控水平。 本标准适用于核设施运行和退役中产生的钢铁、铝、镍和铜材料,设备和工具的再循环再利用。
Clearance levels for recycle and reuse of steel,aluminum,nickel and copper from nuclear facilities
本标准规定了压水堆核电厂运行状态下一次冷却剂、蒸汽发生器炉水和蒸汽内放射性核素比活度的确定方法及液态流出物和气态流出物源项的确定方法。 本标准计算的源项适用于评价通过液态和气态流出物释放到环境中去的放射性核素的年平均排放量。 本标准采用的数据是基于使用锆包壳二氧化铀染料的压水堆核电厂。 本标准仅适用于采用U型管式蒸汽发生器的压水堆核电厂。
Radioactive source term of PWR nuclear power plant for operational states
本标准规定了核设施退役的安全目标、管理原则、辐射安全、退役废物安全和工业安全要求等内容。 本标准主要涉及的是与核设施退役相关的辐射危险,不直接涉及退役活动中可能产生的非辐射危险。 本标准适用于非事故关闭的核设施退役,因事故而关闭的核设施的退役可参照执行。本标准不适用于停闭的铀、钍矿冶尾矿库、废石场、堆渣场、废矿井的整治和放射性废物处置设施的关闭。
Safety requirements for decommissioning of nuclear facilities
本标准规定了核设施的钢铁和铝材再循环、再利用的清洁解控水平。 本标准适用于来自核设施退役或核技术应用等其他原因产生的钢铁和铝材料的清洁解控。
Clearance levels for recycle and reuse of steel and aluminum from nuclear facilities
本标准规定了水池贮源型γ辐照装置的设计安全准则。 本标准适用于水池贮源型γ辐照装置的设计。其他类型γ辐照装置的设计可参照采用。
Criteria for safe design of wet source storage gamma irradiators
本标准规定了核热电厂辐射控制的基本原则和防护标准,以及选址、设计、运行和退役的辐射防护基本要求。 本标准适用于核热电厂,核供热厂也可参照执行。
Regulations for radiation protection of nuclear heat power plant
本标准规定了压水堆核电厂运行工况下一次冷却剂、蒸汽发生器炉水和蒸汽内放射性核素比活度的确定方法及液体排出流和气体排出流源项的确定方法。 本标准计算的源项适用于评价通过液体和气体排出流释放到环境中去的年平均放射性核素排放量。
Radioactive source term of PWR nuclear power plant for operational states
Radiation shielding inspection program for light water reactor nuclear power plant
本标准规定了用于组装防护X、γ辐射的屏蔽墙的各种铅构件的代号、规格和性能要求。 本标准适用于需要防护X、γ辐射的场合。
Lead shielding units for 50 and 100mm thick walls used for protection against ionizing radiation
Technical specification for construction of radiation shielding concrete for nuclear facilities
Nuclear Air and Gas Handling Code Process Gas Handling Part 3: Radioactive Waste Gas Retention Equipment
Iodine charcoal sorbents for nuclear facilities. Method for defining sorption capacity index
本标准规定了核电厂高和超高辐射区的确定原则和人员进入的控制措施。 本标准适用于运行核电厂计划照射情况下高和超高辐射区的进入管理。退役核电厂和其它核设施的高和超高辐射区的进入控制原则上也可参考本标准的规定。
Control of access to high and super-high radiation areas in nuclear power plants
Construction of concrete hot cells - Part 4: Requirements of shielding windows for concrete walls density 2,3 g/cm3 with different thicknesses
Construction of concrete hot cells - Part 3: Requirements of shielding windows for concrete walls with different densities
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号