J24 冷却与冷却装置 标准查询与下载



共找到 89 条与 冷却与冷却装置 相关的标准,共 6

本标准规定了工业循环冷却水中土壤真菌的测定方法。 本标准适用于工业循环冷却水中土壤真菌的测定,也适用于原水、生活用水及其他水中土壤真菌的测定。

Industrial circulating cooling water examination of soil fungi--Standarde of plate count

ICS
13.060.40
CCS
J24
发布
1993-08-06
实施
1994-07-01

本标准规定了工业循环冷却水水垢中铜的测定方法。 本标准适用于工业循环冷却水水垢中铜含量为0.05%~1%(0.5~10mg/g)的测定,也适用于锅炉水水垢的测定。

Scale in industrial circulating cooling water--Determi copper--Atomic absorption spectrometry

ICS
13.060.40
CCS
J24
发布
1993-08-06
实施
1994-07-01

本标准规定了工业循环冷却水中硫酸盐还原菌的测定方法。 本标准适用于工业循环冷却水中硫酸盐还原菌的测定,也适用于原水、生活用水及粘泥中硫酸盐还原菌的测定。

Industrial circulating cooling water sulfate--Reducing Bacteria--MPN test

ICS
13.060.40
CCS
J24
发布
1993-08-06
实施
1994-07-01

本标准规定了工业循环冷却水中铁细菌的测定方法。 本标准适用于工业循环冷却水中铁细菌的测定,也适用于原水、生活用水及粘泥中的铁细菌的测定。

Industrial circulating cooling water examination of iron Bacteria--MPN test

ICS
13.060.40
CCS
J24
发布
1993-08-06
实施
1994-07-01

本标准规定了工业循环冷却水中锌的测定方法。 本标准适用于工业循环冷却水中锌含量为0.1~20.0mg/L的测定,也适用于各种工业用水、原水及生活用水中锌含量的测定。

Industrial circulating cooling water--Determination of zinc--Atomic absorption spectrometry

ICS
CCS
J24
发布
1993-08-06
实施
1994-07-01

本标准规定了工业循环冷却水水垢中锌含量的测定方法。 本标准适用于工业循环冷却水水垢中锌含量为0.01%~1%(0.1~10mg/g)的测定,也适用于锅炉水水垢中锌含量的测定。

Scale in industrial circulating cooling water--Determi zinc--Atomic absorption spectrometry

ICS
CCS
J24
发布
1993-08-06
实施
1994-07-01

本标准规定了工业循环冷却水中铜的测定方法。 本标准适用于工业循环冷却水中铜含量为0.5~50mg/L的测定,也适用于各种工业用水、原水及生活用水中铜含量的测定。

Industrial circulating cooling water--Determination of copper--Atomic absorption spectrometry

ICS
13.060.40
CCS
J24
发布
1993-08-06
实施
1994-07-01

本标准规定了循环冷却水中钾的测定方法。 本标准适用于工业循环冷却水中钾含量0.3~20mg/L的测定,也适用于各种工业用水、原水及生活用水中钾的测定。

Industrial circulating cooling water--Determination of potassium--Atomic absorption spectrometry

ICS
13.060.40
CCS
J24
发布
1993-08-06
实施
1994-07-01

本标准规定了工业循环冷却水中钙的测定方法。 本标准适用于工业循环冷却水中钙含量范围为0.5~75mg/L的测定,也适用各种工业用水、原水和生活用水中钙含量的测定。

Industrial circulating cooling water--Determination of calcium--Atomic absorption spectrometry

ICS
13.060.40
CCS
J24
发布
1993-08-06
实施
1994-07-01

本标准规定了工业循环冷却水中钠的测定方法。 本标准适用于含钠20~500mg/L工业循环冷却水中钠含量的测定,也适用于各种工业用水、原水和生活用水中钠含量的测定。

Industrial circulating cooling water--Determination of sodium--Atomic absorption spectrometry

ICS
13.060.40
CCS
J24
发布
1993-08-06
实施
1994-07-01

本标准规定了工业循环冷却水及锅炉水中氟(F-)、氯(Cl-)、磷酸根(PO3-4 )、亚硝酸根(NO2-)、硝酸根(NO3- )、硫酸根(SO42-)等离子的测定方法。 本标准适用于工业循环冷却水及锅炉水中氟含量0.10~100.0mg/L;氯含量0.10~500.0mg/L;磷酸根含量0.10~50.0mg/L;亚硝酸根含量1.0~50.0mg/L;硝酸根含量3.0~100.0mg/L;硫酸根含量5.0~500.0mg/L范围的测定。

Industrial circulating cooling water and boiler waterdetermination of fluorine Choride phosphate Nitrite nitrate and sulfate--Ion chromatography

ICS
13.060.40
CCS
J24
发布
1993-08-06
实施
1994-07-01

本标准规定了工业循环冷却水中粘液形成菌的测定方法。 本标准适用于工业循环冷却水中悬浮的粘泥中的异养菌的测定。也适用于工业循环冷却水中沉积的粘泥中异养菌的测定,还适用于原水,生活用水及其他水中粘液异养菌的测定。

Industrial circulating cooling water--Fxamination of bacteria formed deposits--Standarde of plate count

ICS
13.060.40
CCS
J24
发布
1993-08-06
实施
1994-07-01

本标准规定了工业循环冷却水中土壤菌群的测定方法。 本标准适用于工业循环冷却水中土壤菌群的测定,也适用于原水、生活用水及其他水中土壤菌群的测定。

Industrial circulating cooling water examination of soil micro-bioti--Standarde of plate count

ICS
13.060.40
CCS
J24
发布
1993-08-06
实施
1994-07-01

本标准规定了循环冷却水中粘泥真菌的测定方法。 本标准适用于工业循环冷却水中粘泥真菌的测定,也适用于原水、生活用水及其他水中粘泥真菌的测定。

Industrial circulating cooling water examination of slime formed furgi--Standarde of plate count

ICS
13.060.40
CCS
J24
发布
1993-08-06
实施
1994-07-01

Dieser Teil der ISO 16610 legt die grundlegenden Konzepte für robuste Profilfilter fest.

Geometrical product specifications (GPS) - Filtration Part 30: Robust profile filters: Basic concepts

ICS
17.040.20;17.040.40
CCS
J24
发布
2017-01
实施

Dieses Dokument enthält Verfahren zur Behandlung von Endeffekten bei linearen Profilfiltern im Fall ihres Auftretens.

Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects

ICS
17.040.40
CCS
J24
发布
2016-12
实施

Dieses Dokument legt die Merkmale des diskreten robusten Gaußschen Regressionsfilters für die Auswertung von Oberflächenprofilen mit impulsartigen Störungen, wie beispielsweise tiefe Einschnitte und hohe Spitzen, fest.

Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016)

ICS
17.040.20
CCS
J24
发布
2016-11
实施

This European Standard describes the procedure to determine the rated thermal output (D) and the mean surface temperature (trp) of pre-fabricated ceiling mounted radiant panels. Pre-fabricated ceiling mounted radiant panels exchange heat mainly by radiation. The test methods for determining the thermal output of pre-fabricated ceiling mounted radiant panels, as described in EN 14037-2:2016, give reliable results for comparing different products, but these results understate the output obtained under real operating conditions.

Free hanging heating and cooling surfaces for water with a temperature below 120��- Part 3: Prefabricated ceiling mounted radiant panels for space heating - Rating method and evaluation of radiant thermal output

ICS
91.140.10
CCS
J24
发布
2016-09
实施

This European Standard defines technical specifications and requirements of free hanging pre-fabricated ceiling mounted radiant panels with an air gap between construction and the emitter (not embedded) fed with water at temperatures below 120 °C connected with a centralized heating supply source intended to be installed in buildings. The panels should be installed with an upper insulation. The European Standard does not apply to independent heating devices. The European Standard also defines the additional common data that the manufacturer has to provide to the trade in order to ensure the correct application of the products. This European standard does not cover the performance of hanging accessories.

Free hanging heating and cooling surfaces for water with a temperature below 120��- Part 1: Pre-fabricated ceiling mounted radiant panels for space heating - Technical specifications and requirements

ICS
91.140.10;91.140.30
CCS
J24
发布
2016-09
实施

This European Standard defines the technical specifications and requirements for the definition of the cooling capacity of pre-fabricated ceiling mounted radiant panels according to the specifications of EN 14037-1:2016, 3.3.1. The test according to this standard requires the measurement of the thermal output according to EN 14037-2:2016 of the model.

Free hanging heating and cooling surfaces for water with a temperature below 120��- Part 4: Pre-fabricated ceiling mounted radiant panels - Test method for cooling capacity

ICS
91.140.10;91.140.30
CCS
J24
发布
2016-09
实施



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号