J45 组合卡具 标准查询与下载
共找到 462 条与 组合卡具 相关的标准，共 31 页
本标准规定了组合夹具元件典型结构要素的结构形式、尺寸规格和技术要求。 本标准适用于组合夹具元件的设计和制造。
Modular parts of fixture construction,general features,profiles and dimensions
- ICS
- 25.060.20
- CCS
- J45
- 发布
- 2008-04-09
- 实施
- 2008-10-01
本标准规定了方柱立式钻床的工作精度检验的要求及检验方法。 本标准适用于一般用途的方柱立式钻床。
Box type vertical drilling machines--Testing of the accuracy--PartⅡ: working tests
- ICS
- 25.080.40
- CCS
- J45
- 发布
- 1997-11-13
- 实施
- 1998-07-01
本标准规定了用于螺纹紧固件的高扭矩十字槽及检查十字槽的塞规的相关尺寸。 本标准主要适用于航空航天专业，也适用于其他要求承受较高扭矩的紧固件。
Offset cruciform recess for rotary fastening devices
- ICS
- 21.060
- CCS
- J45
- 发布
- 1990-11-03
- 实施
- 1991-09-01
组合夹具元件结构要素
Modular parts of fixture construction--General features,profiles and dimensions
- ICS
- 25.060.20
- CCS
- J45
- 发布
- 1981-11-17
- 实施
- 1982-07-01
General technical conditions for slot series combined fixture components
- ICS
- 25.060.20
- CCS
- J45
- 发布
- 2021-03-05
- 实施
- 2021-07-01
Inspection method for finished products of slot series combined fixture components
- ICS
- 25.060.20
- CCS
- J45
- 发布
- 2021-03-05
- 实施
- 2021-07-01
General technical conditions for slot series combined die components
- ICS
- 25.060.20
- CCS
- J45
- 发布
- 2021-03-05
- 实施
- 2021-07-01
Basic terminology of combination fixture
- ICS
- 25.060.20
- CCS
- J45
- 发布
- 2021-03-05
- 实施
- 2021-07-01
General technical conditions for hole series combination fixture components
- ICS
- 25.060.20
- CCS
- J45
- 发布
- 2021-03-05
- 实施
- 2021-07-01
Collets for tool holders with taper ratio 1:10. Collets, holders, nuts
- ICS
- 25.060.20
- CCS
- J45
- 发布
- 2016-09-30
- 实施
- 2016-09-30
Tool holders with cylindrical shank - Part 6: Type E with cylindrical seat
- ICS
- 25.060.20
- CCS
- J45
- 发布
- 2016-03
- 实施
Tool holders with cylindrical shank - Part 7: Type F with taper seat
- ICS
- 25.060.20
- CCS
- J45
- 发布
- 2016-03
- 实施
Tool holders with cylindrical shank - Part 3: Type B with rectangular radial seat
- ICS
- 25.060.20
- CCS
- J45
- 发布
- 2016-03
- 实施
Tool holders with cylindrical shank - Part 2: Type A, shanks for tool holders of special designs
- ICS
- 25.060.20
- CCS
- J45
- 发布
- 2016-03
- 实施
Tool holders with cylindrical shank - Part 4: Type C with rectangular axial seat
- ICS
- 25.060.20
- CCS
- J45
- 发布
- 2016-03
- 实施
7/24 Taper Tool to Spindle Connection for Automatic Tool Change
- ICS
- CCS
- J45
- 发布
- 2015-09-30
- 实施
Holders with clamp screw for flatted parallel shank end mills. Connecting dimensions of the driving system of tool shanks
- ICS
- 25.060.20
- CCS
- J45
- 发布
- 2014
- 实施
- 2016-01-01
Assembling grooves for tool and work holders
- ICS
- 25.060.10
- CCS
- J45
- 发布
- 2010-08
- 实施
This translation has been made based on the Amendment to the origi- nal Japanese Industrial Standard revised by the Minister of Economy, Trade and Industry through deliberations at the Japanese Industrial Standards Committee as the result of proposal for revision of Japanese Industrial Standard with the draft being attached, based on the provi- sion of Article 12 Clause 1 of the Industrial Standardization Law ap- plicable to the case of revision by the provision of Article 14. Consequently, JIS B 2809:1996 is partially replaced with this Amend- ment.
Wire ropes -- Grips for rope or wire strand (Amendment 1)
- ICS
- 21.060.99;77.140.65
- CCS
- J45
- 发布
- 2009-02-20
- 实施
- 2009-02-20
This part of ASME B5.60 standard covers the interface of two-piece chuck jaws.
Workholding Chucks - Jaw Type Chucks
- ICS
- 25.060.20
- CCS
- J45
- 发布
- 2009
- 实施
