J96 冷却系统与加热装置 标准查询与下载



共找到 166 条与 冷却系统与加热装置 相关的标准,共 12

Internal combustion engines—Charge air coolers—Specification

ICS
27.020
CCS
J96
发布
2018-02-06
实施
2018-09-01 00:00:00.0

GB/T 6809的本部分规定了往复式内燃机冷却系统术语。 ISO 2710对往复式内燃机进行了分类,并对这些内燃机的基本词汇及其特征进行了定义。

Reciprocating internal combustion engines.Vocabulary of components and systems.Part 5:Cooling systems

ICS
27.020
CCS
J96
发布
2016-04-25
实施
2016-11-01

GB/T 6809制定了往复式内燃机零部件和系统词汇,GB/T 6809的本部分规定了冷却系统及其零部件的相关术语。

Reciprocating internal combustion engines.Vocabulary of components and systems.Part 5:Cooling systems

ICS
27.020
CCS
J96
发布
2010-11-10
实施
2011-03-01

本标准规定了内燃机增压空气冷却器的术语和定义、符号和缩略语、技术要求、试验方法、检验规则及标志、包装、运输和贮存等。 本标准适用于汽车、拖拉机、工程机械用内燃机增压空气冷却器(以下简称中冷器)。其他用途的内燃机增压空气冷却器也可参照使用。

Internal combustion engines.Charge air coolers.Specification

ICS
27.020
CCS
J96
发布
2009-03-19
实施
2009-11-01

本标准规定了对高频介质加热设备的各项要求,包括产品分类、技术要求、试验方法、检验规则、技 术分级、标志、包装、运输、贮存、订购和供货等。本标准适用于频率为1~300MHz、输出功率大于或等于50W的高频介质加热设备(以下简称设备)。该设备可在自然气氛、保护气氛和真空中,对诸如塑料、木材、橡胶、织品、玻璃、陶瓷、纸张、食品等部分导电性或非导电性材料进行加热、软化、热合和干燥等热加工工艺。设备的产品标准应根据本标准制订。

Basic specifications for electroheat installations.high frequency dielectric heating installations

ICS
CCS
J96
发布
1993-12-28
实施
1994-10-01

本标准规定了铁制旋启式止回阀的结构型式、技术要求、试验方法、标志、包装、运输、贮存等基本要求。 本标准适用于公称压力PN0.25~4.0MPa,公称通径DN50~1800mm,温度不高于350℃,工作介质为蒸汽、空气和水,法兰连接的灰铸铁和球墨铸铁制旋启式止回阀(以下简称止回阀)。

Teneral purpose industrial valves.Cast iron swing check valves

ICS
23.060
CCS
J96
发布
1992-12-10
实施
1993-06-01

本标准适用于拖拉机和农用固定式、移动式柴油机冷却水用的管片式水散热器。

Types and dimensions and installation parameters of cooling water radiators for tractor diesel engines

ICS
43.060.30
CCS
J96
发布
1986-07-22
实施
1987-05-01

本标准适用于拖拉机和农用固定式、移动式柴油机冷却水用的管片式水散热器型号。

Cooling water radiators for tractor diesel engines--Method of identification symbols

ICS
43.060.30
CCS
J96
发布
1986-07-22
实施
1987-05-01

Technical specifications of silicone oil fan clutch for internal combustion engines

ICS
27.020
CCS
J96
发布
2020-08-31
实施
2021-04-01

Technical specifications of plastic wind guard for internal combustion engine cooling fan

ICS
27.020
CCS
J96
发布
2020-08-31
实施
2021-04-01

Internal combustion engine exhaust gas recirculation cooler (EGRC) test method

ICS
27.020
CCS
J96
发布
2019-08-27
实施
2020-04-01

Internal combustion engine exhaust gas recirculation cooler (EGRC) test method

ICS
27.020
CCS
J96
发布
2019-08-02
实施
2020-04-01

本标准规定了冷凝式内燃机冷却风扇的试验项目、方法、内容、数据计算、结果分析以及文件整理的要求。 本标准适用于冷凝式内燃机带发电机及不带发电机的两种冷却风扇。

Cooling fan for internal combustion engines.Part 4: Test method for cooling fan of condensing engines

ICS
27.02
CCS
J96
发布
2018-07-04
实施
2019-05-01

JB/T 6003的本部分规定了内燃机机油冷却器(以下简称冷却器)在给定条件下,冷、热流体的进出口温度、流量和压差的测定方法以及性能参数的计算方法。 本部分适用于汽车、拖拉机、工程机械、小型船舶、发电机组、液压传动等配套的各种结构型式的冷却器,其他用途结构类似的冷却器亦可参照执行。

Internal combustion engines.Oil coolers.Part 3:Test method for heat transfer capability

ICS
27.02
CCS
J96
发布
2018-07-04
实施
2019-05-01

Internal combustion engine cooling fans Part 1: Technical conditions for metal cooling fans

ICS
27.02
CCS
J96
发布
2018-07-04
实施
2019-05-01

本标准规定了冷凝式内燃机冷却风扇的分类、命名、技术要求、检验规则以及标志、包装和贮存。 本标准适用于冷凝式内燃机带发电机及不带发电机的两种冷却风扇。

Cooling fan for internal combustion engines.Part 3: Specifications for cooling fan of condensing engines

ICS
27.02
CCS
J96
发布
2018-07-04
实施
2019-05-01

Process specifications for remanufactured internal combustion engine water pumps

ICS
27.02
CCS
J96
发布
2018-02-09
实施
2018-10-01

Cooling water pumps for internal combustion engines Part 8: Variable cooling water pumps

ICS
27.02
CCS
J96
发布
2017-11-07
实施
2018-04-01

Cooling water pumps for internal combustion engines Part 9: Electric cooling water pumps

ICS
27.02
CCS
J96
发布
2017-11-07
实施
2018-04-01

Water tanks for small and medium power internal combustion engines Part 2: Technical conditions for non-metallic water tanks

ICS
27.020
CCS
J96
发布
2017-01-09
实施
2017-07-01



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号