K08 标志、包装、运输、贮存 标准查询与下载
共找到 36 条与 标志、包装、运输、贮存 相关的标准，共 3 页
Code for designation of colours
- ICS
- 01.070
- CCS
- K08
- 发布
- 2021-08-11
- 实施
- 2021-08-11
This document specifies letter codes for designation of colours and provides rules for their combination to designate colour combinations. The letter codes are intended to be applied in the technical documentation of electrical installations, electrical equipment and products, an
Code for designation of colours
- ICS
- 01.070
- CCS
- K08
- 发布
- 2021-06-01
- 实施
The technical terms of delivery apply to steel drums according DIN 46391-1 and DIN 46391-3. For wooden drums, DIN 46391-2 is applicable. For other materials, corresponding terms of delivery must be agreed.
Delivery drums for cables and ropes - Part 4: Technical terms of delivery for steel drums
- ICS
- 55.060
- CCS
- K08
- 发布
- 2018-05-01
- 实施
This standard applies to drums with diameter of flange from 3000 to 4500 mm for delivery of cables and ropes.
Delivery drums for cables and ropes - Part 3: Drums with diameter of flange of more than 2 800 mm - Dimensions
- ICS
- 55.060
- CCS
- K08
- 发布
- 2018-05-00
- 实施
The technical terms of delivery apply to wooden drums according DIN 46391-1. If other materials are used, corresponding terms of delivery shall be agreed.
Delivery drums for cables and ropes - Part 2: Technical terms of delivery for wooden drums
- ICS
- 55.060
- CCS
- K08
- 发布
- 2018-05-00
- 实施
- 2018-05-01
Technical specifications for mobile operation terminals on-site in electric power marketing
- ICS
- 29.02
- CCS
- K08
- 发布
- 2017-11-15
- 实施
- 2018-03-01
JB/T 8135的本部分规定了热塑性材料可回收型圆锥形交货线盘(以下简称线盘)的要求。使用过的线盘不包含在本部分中。本部分适用于热塑性材料制成的绕组线包装用可回收型圆锥形交货线盘。
Packaging of winding wires.Part 32:Taper barrelled delivery spools.Specification for returnable spools made from thermoplastic materials
- ICS
- 29.060.01
- CCS
- K08
- 发布
- 2013-12-31
- 实施
- 2014-07-01
JB/T 8135的本部分规定了绕组线圆锥形交货线盘用热塑性材料容器(以下简称容器)的试验方法。本部分适用于绕组线圆锥形交货线盘用热塑性材料容器。
Packaging of winding wires.Part 42:Methods of test.containers made from thermoplastic materials for taper barrelled delivery spools
- ICS
- 29.060.01
- CCS
- K08
- 发布
- 2013-12-31
- 实施
- 2014-07-01
JB/T 8135的本部分规定了绕组线用热塑性材料交货线盘(以下简称线盘)的试验方法。本部分适用于绕组线包装用热塑性材料交货线盘。
Packaging of winding wires.Part 41:methods of test.Delivery spools made from thermoplastic materials
- ICS
- 29.060.01
- CCS
- K08
- 发布
- 2013-12-31
- 实施
- 2014-07-01
JB/T 8135的本部分规定了圆锥形交货线盘用热塑性材料容器(以下简称容器)的性能要求。本部分适用于绕组线包装中圆锥形交货线盘用热塑性材料容器。
Packaging of winding wires.Part 35:Taper barrelled delivery spools.Specification for spool containers made from thermoplastic material
- ICS
- 29.060.01
- CCS
- K08
- 发布
- 2013-12-31
- 实施
- 2014-07-01
JB/T 8135的本部分规定了符合JB/T 8135.31要求的圆锥形交货线盘用容器的基本尺寸。本部分适用于绕组线包装中圆锥形交货线盘用容器。
Packaging of winding wires.Part 34:Taper barrelled dilivery spools.Basic dimensions of containers for taper barrelled delivery spools
- ICS
- 29.060.01
- CCS
- K08
- 发布
- 2013-12-31
- 实施
- 2014-07-01
JB/T 8135的本部分规定了热塑性材料非回收圆锥形交货线盘(以下简称线盘)的要求。本部分适用于热塑性材料制成的绕组线包装用非回收圆锥形交货线盘。
Packaging of winding wires.Part 33:Taper barrelled delivery spools.Specification for non- returnable spools made from thermoplastic material
- ICS
- 29.060.01
- CCS
- K08
- 发布
- 2013-12-31
- 实施
- 2014-07-01
JB/T 8135的本部分规定了圆绕组线线桶(以下简称线桶)的规格尺寸、材料、使用、型号和标志。本部分适用于圆绕组线用线桶。
Packaging of winding wires.Part 1:Containers for round winding wires
- ICS
- 29.060.01
- CCS
- K08
- 发布
- 2013-12-31
- 实施
- 2014-07-01
JB/T 8135的本部分规定了绕组线用圆柱形交货线盘的基本尺寸。本部分适用于绕组线用圆柱形交货线盘。
Packaging of winding wires.Part 21:Cylindrical barrelled delivery spools.Basic dimensions
- ICS
- 29.060.01
- CCS
- K08
- 发布
- 2013-12-31
- 实施
- 2014-07-01
JB/T 8135的本部分规定了热塑性材料可回收圆柱形交货线盘(以下简称线盘)的要求。本部分适用于热塑性材料制成的绕组线包装用可回收圆柱形交货线盘。
Packaging of winding wires.Part 22:Cylindrical barrelled delivery spools.Specification for returnable spools made from thermoplastic material
- ICS
- 29.060.01
- CCS
- K08
- 发布
- 2013-12-31
- 实施
- 2014-07-01
JB/T 8135的本部分规定了热塑性材料非回收圆柱形交货线盘(以下简称线盘)的要求。本部分适用于热塑性材料制成的绕组线包装用非回收圆柱形交货线盘。
Packaging of winding wires.Part 23:Cylindrical barrelled delivery spools.Specification for non-returnable spools made from thermoplastic material
- ICS
- 29.060.01
- CCS
- K08
- 发布
- 2013-12-31
- 实施
- 2014-07-01
JB/T 8135的本部分规定了绕组线用圆锥形交货线盘(以下简称线盘)的基本尺寸。本部分适用于绕组线用圆锥形交货线盘。
Packaging of winding wires.Part 31:Taper barrelled delivery spools.Basic dimensions
- ICS
- 29.060.01
- CCS
- K08
- 发布
- 2013-12-31
- 实施
- 2014-07-01
Mnemonics and designations of symbols for measuring relays, instruments and related device
- ICS
- 01.080.40;17.220.20;29.200
- CCS
- K08
- 发布
- 2011-10
- 实施
This standard is applicable to the marking of aerospace vehicle electrical wires and cables using ultraviolet (UV) lasers. This standard specifies the process requirements for the implementation of UV laser marking of aerospace electrical wire and cable and fibre optic cable to achieve an acceptable quality mark using equipment designed for UV laser wire marking of identification codes on aircraft wire and cable subject to EN 3475-100, Aerospace series ― Cables, electrical, aircraft use ― Test methods ― Part 100: General. Wiring specified as UV laser markable and which has been marked in accordance with this standard will conform to the requirements of EN 3838.
Aerospace series - Wire and cable marking process, UV Laser
- ICS
- 49.060
- CCS
- K08
- 发布
- 2010-04-30
- 实施
- 2010-04-30
Industrial systems, installations and equipment and industrial products - Labelling of cables and cores (IEC 62491:2008); German version EN 62491:2008
- ICS
- CCS
- K08
- 发布
- 2009-05
- 实施
