L08 标志、包装、运输、贮存 标准查询与下载



共找到 94 条与 标志、包装、运输、贮存 相关的标准,共 7

本标准规定了电阻器和电容器的标志代码,以及塑料膜和纸介电容器的介质材料和电极的索引。 本标准第3章中规定的代码给出了固定电阻器的色标代码。 此代码用于GB/T 2471-1995《电阻器和电容器优先数系》中规定的E6~E192系列值。 本标准第4章中规定的代码系统地给出了用字母和数字标志电阻值和电容量的方法。 本标准第5章中规定的代码系统地给出了用一个字母标志电阻值和电容量允许偏差的方法。 本标准第6章中规定的代码系统地给出了用字母和数字标志电阻器和电容器制造日期的方法。 本标准第7章中规定的代码(索引)给出了介质材料的代码。

Marking codes for resistors and capacitors

ICS
31.020
CCS
L08
发布
2016-04-25
实施
2016-12-01

本标准规定了环氧粉末包封料倾斜流动性和水平流动性测试方法。 本标准适用于环氧粉末包封料熔融流动性测定。

Test method for measuring melt fluidity of encapsulating material of powdered epoxy

ICS
31.020
CCS
L08
发布
2012-11-05
实施
2013-02-15

GB/T 28162的本部分适用于与电路连接的无引线或有引线柱的电子元器件的带式包装。本部分仅包括对元器件带式包装至关重要的带尺寸。 本部分还包括对单芯片产品(包括裸芯片和带凸点芯片(倒装芯片))包装的相关要求。

Packaging of components for automatic handing.Part 3:Packaging of surface mount components on continuous tapes

ICS
31.020
CCS
L08
发布
2011-12-30
实施
2012-07-01

本导则适用于与外线相联接的电子设备的雷击保护,对雷电直击设备不能提供保护。

Guidance for lightning protection for electronic equipments

ICS
13.260
CCS
L08
发布
1987-03-17
实施
1987-11-01

Biodegradable plastic lining for electronic product packaging

ICS
83.140.01
CCS
L08
发布
2023-05-22
实施
2023-11-01

Packaging of components for automatic handling -- Part 2: Tape packaging of components with unidirectional leads on continuous tapes

ICS
31.020;31.240
CCS
L08
发布
2019-03-20
实施

Civil Aviation Mobile Application Security Evaluation Guide

ICS
ICS35.020.
CCS
L08
发布
2018-12-14
实施
2019-04-01

Civil Aviation Web Application System Security Detection Guide

ICS
ICS35.020.
CCS
L08
发布
2018-12-14
实施
2019-04-01

This document applies to labels on the packaging of electronic components for automatic handling in B2B processes. These labels use linear bar code and two-dimensional (2D) symbols. Labels for direct product marking and shipping labels are excluded. Labels required on the packaging of electronic components that are intended for the retail channel of distribution in B2C processes are also excluded from this document. Bar code and 2D symbol markings are used, in general, for automatic identification and automatic handling of components in electronics assembly lines. Intended applications include systems that automate the control of component packages during production, inventory and distribution.

Product package labels for electronic components using bar code and two-dimensional symbologies

ICS
31.190;31.200;35.040.50
CCS
L08
发布
2017-04
实施

This part of IEC 60286 applies to the tape packaging of components with two or more unidirectional leads for use in electronic equipment. In general@ the tape is applied to the component leads. It covers requirements for taping techniques used with equipment for automatic handling@ preforming of leads@ insertion and other operations and includes only those dimensions which are essential to the taping of components intended for the above-mentioned purposes.

Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes

ICS
31.020;31.240;55.060
CCS
L08
发布
2015-04
实施
2015-04-24

Packaging of components for automatic handling - Part 3 : packaging of surface mount components on continuous tapes

ICS
31.020;31.240
CCS
L08
发布
2015-02-07
实施
2015-02-07

本标准规定了特种识别印记的术语和定义、环境要求、安装要求、耐环境性试验要求和性能检测要求。 本标准适用于固体承载物上制作的特种识别印记的检测。

Special identification imprint detection

ICS
31.190
CCS
L08
发布
2013-09-29
实施
2013-10-20

Packaging of components for automatic handling. Packaging of surface mount components on continuous tapes

ICS
31.020;55.060
CCS
L08
发布
2013-08-31
实施
2013-08-31

This part of IEC 60286 is applicable to the tape packaging of electronic components without leads or with lead stumps, intended to be connected to electronic circuits. It includes only those dimensions that are essential for the taping of components intended for the abovementioned purposes. This standard also includes requirements related to the packaging of singulated die products including bare die and bumped die (flip chips).

Packaging of components for automatic handling.Part 3: Packaging of surface mount components on continuous tapes

ICS
31.020;55.060
CCS
L08
发布
2013-05
实施
2019-01-18

This Japanese Industrial Standard has been prepared based on the third edition of IEC 60286-2 published in 2008 without any modifications of the technical contents and the structure.

Packaging of components for automatic handling -- Part 2: Packaging of components with unidirectional leads on continuous tapes

ICS
31.020;31.240
CCS
L08
发布
2010-08-20
实施

Packaging - Radio-frequency identification of rigid industrial packaging, positioning and system parameters for passive RFID chips - Part 2: Non-removable head (tight head) steel drum and removable head (open head) steel drum with plug/bung closure system

ICS
35.240.60;55.140
CCS
L08
发布
2010-08
实施

Packaging - Radio-frequency identification of rigid industrial packaging, positioning and system parameters for passive RFID chips - Part 4: Fibreboard drum of nominal capacity up to 250 l

ICS
35.240.60;55.140
CCS
L08
发布
2010-08
实施

Packaging - Radio-frequency identification of rigid industrial packaging, positioning and system parameters for passive RFID chips - Part 3: Removable head (open head) steel drum without plug/bung closure system of total capacity exceeding 200 l

ICS
35.240.60;55.140
CCS
L08
发布
2010-08
实施

Packaging - Radio-frequency identification of rigid industrial packaging, positioning and system parameters for passive RFID chips - Part 7: Composite intermediate bulk container (IBC)

ICS
35.240.60;55.180.99
CCS
L08
发布
2010-08
实施

Packaging - Radio-frequency identifcation of rigid industrial packaging, positioning and system parameters for passive RFID chips - Part 6: Removable head (open head) plastics drum without plug/bung closure system of nominal capacity exceeding 200 l

ICS
35.240.60;55.140
CCS
L08
发布
2010-08
实施



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号