L34 其他电子元器件 标准查询与下载

IEC 61747-2:2015 液晶显示器件.第2部分:液晶显示模块.分规范

This part of IEC 61747 applies to liquid crystal display modules such as the following: ?C static/segment type liquid crystal display modules; ?C passive matrix monochrome liquid crystal display modules; ?C passive matrix colour liquid crystal display modules; ?C active matrix monochrome liquid crystal display modules; ?C active matrix colour liquid crystal display modules. It gives details of the quality assessment procedures@ inspection requirements@ screening sequences@ sampling requirements@ and test and measurement procedures required for the assessment of liquid crystal display modules.

Liquid crystal display devices - Part 2: Liquid crystal display modules - Sectional specification

IEC 61747-3-1:2015 液晶显示器.第3-1部分:液晶显示屏(LCD).空白详细规范规范

This part of IEC 61747 serves as a blank detail specification (BDS) for the IEC quality assessment system and contains requirements for style and layout and minimum content of the detail specifications. These requirements are applicable when the detail specification is published (e.g. for a standard product).

Liquid crystal display devices - Part 3-1: Liquid crystal display (LCD) cells - Blank detail specification

DIN EN 60294:2013 具有轴向引出端的圆柱形元件尺寸的测量 (IEC 60294-2012); 德文版本EN 60294-2012

Measurement of the dimensions of a cylindrical component with axial terminations (IEC 60294:2012); German version EN 60294:2012

IEC 61747-3-1:2006 液晶显示器.第3-1部分:液晶显示屏(LCD).空白详细规范规范

International Standard IEC 61747-3-1 has been prepared by IEC technical committee 110: Flat panel display devices. This second edition cancels and replaces the first edition, published in 1998, and constitutes a technical revision. The main change with regard to the previous edition is as follows: – the new edition was editorially changed in accordance with current ISO/IEC directives. Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The QC number that appears on the front cover of this publication is the specification number in the IECQ Quality Assessment System for Electronic Components (IECQ). Future standards in this series will carry the new general title as cited above. Titles of existing standards in this series will be updated at the time of the next edition. A list of all parts of the IEC 61747 series, under the general title Liquid crystal display devices , can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to the specific publication. At this date, the publication will be • reconfirmed, • withdrawn, • replaced by a revised edition, or • amended.

Liquid crystal display devices - Part 3-1: Liquid crystal display (LCD) cells - Blank detail specification

IEC 61747-3:2006 液晶显示器件.第3部分:液晶显示屏(LCD).分规范

This sectional specification applies to liquid crystal cells of the segment type monochrome . It gives details of the quality assessment procedures, the inspection requirements, screening sequences, sampling requirements and test and measurement procedures required for the assessment of liquid crystal display cells. Instead of the qualification approval procedure, the capability approval procedure can be applied (see Clause 4 of IECQ 001002-3; however, at present the capability approval procedure for liquid crystal display cells is under consideration) for all products manufactured in a defined process. All the requirements of this specification remain valid, unless modified by the requirements set out in 4.7 of this standard.

Liquid crystal display devices - Part 3: Liquid crystal display (LCD) cells - Sectional specification

IEC 61747-6:2004 液晶和固态显示器件.第6部分:液晶模数的测量方法.透射型

Gives details of the quality assessment procedures, inspection requirements, screening sequences, sampling requirements and test and measurement procedures required for the assessment of liquid crystal display modules. This standard is restricted to tran

Liquid crystal and solid-state display devices - Part 6: Measuring methods for liquid crystal modules - Transmissive type

BS EN 61988-2-1:2002 等离子体显示板.测量方法.光学

This part of IEC 61988 determines the measuring methods for characterizing the performance of colour plasma display modules in the following areas: a) 4 % window luminance; b) luminance uniformity; c) dark-room contrast ratio; d) white chromaticity and chromatic uniformity; e) colour gamut in the centre box.

Plasma display panels - Measuring methods - Optical

IEC 61988-2-2:2003 等离子体显示板.第2-2部分:光电测量方法

This part of IEC 61988 determines the following measuring methods for characterising the performance of colour plasma display modules: a) bright-room contrast ratio; b) module power and current consumption; c) module luminous efficacy.

Plasma display panels - Part 2-2: Measuring methods; Optoelectrical

IEC 61988-2-1:2002 等离子体显示板.第2-1部分:光学测量方法

Determines the measuring methods for characterizing the performance of colour plasma display modules in the following areas: 4 % window luminance; luminance uniformity; dark-room contrast ratio; white chromaticity and chromatic uniformity; colour gamut i

Plasma display panels - Part 2-1: Measuring methods, Optical

NF C93-547-2-1:2001 液晶和固态显示器.第2-1部分:无源矩阵单色液晶显示器模块.空白详细规范

Liquid crystal and solid-state display devices - Part 2-1 : passive matrix monochrome LCD modules - Blank detail specification.

NF C93-547-5*NF EN 61747-5:1999 液晶和固态显示器.第5部分:环境老化和机械性能试验方法

Liquid crystal and solid-state display devices. Part 5 : environmental endurance and mechanical test methods.

ARMY MIL-PRF-71185-1999 动态参考资料混合单元(DRUH)

This specification covers the Dynamic Reference Unit Hybrid(DRUH). The DRUH is the major line replaceable unit(LRU) of the Modular Azimuth Position System(MAPS) Hybrid integrated survey system.

DYNAMIC REFERENCE UNIT HYBRID (DRUH)

BS EN 61747-2:1999 液晶和固态显示装置 液晶显示模块 截面规格

Details the Quality Assessment Procedures, inspection requirements, screening sequences, sampling requirements and test and measurement procedures. To be read in conjunction with BS IEC 61747-1:1998

Liquid crystal and solid-state display devices. Liquid crystal display modules. Sectional specification

JEDEC JESD67-1999 具有可配置的通信电压、阻抗以及接收机阀值的I/O驱动器和接收机 1996 06

This standard is the compilation of 4 separate JEDEC documents covering respectively configurable I/O voltage, receiver type and switchpoint, and driver impedance.

I/O Drivers and Receivers with Configurable Communication Voltage, Impedance, and Receiver Threshold

BS IEC 61747-2-1:1998 液晶或固态显示装置.无源矩阵单色LCD模块.空白详细规范

Liquid crystal and solid-state display devices - Part 2-1: Passive matrix monochrome LCD modules - Blank detail specification Mechanical description Short descriDtion Categories of assessed quality Marking Ordering information Limiting values (absolute maximum rating system) Operating range and electrical and optical characteristics Test conditions and inspection requirements

Liquid crystal and solid state display devices. Passive matrix monochrome LCD modules. Blank detail specification

BS EN 61747-4:1998 液晶和固态显示装置.液晶显示模块和电池.基本额定值和特性

Describes the essential ratings and characteristics of LCD cells and passive matrix monochrome LCD modules. It does not apply to active LCD cells or multicolour cells.

Liquid crystal and solid-state display devices - Liquid crystal display modules and cells - Essential ratings and characteristics

BS EN ISO 9283:1998 操纵工业机器人.性能标准和相关试验方法

This International Standard describes methods of specifying and testing the following performance characteristics of manipulating industrial robots: - pose accuracy and pose repeatability; - multi-directional pose accuracy variation; - distance accuracy and distance repeatability; - position stabilization time; - position overshoot; - drift of pose characteristics; - exchangeability; - path accuracy and path repeatability; - path accuracy on reorientation - cornering deviations; - path velocity characteristics; - minimum posing time; - static compliance; - weaving deviations. This International Standard does not specify which of the above performance characteristics are to be chosen for testing a particular robot. The tests described in this International Standard are primarily intended for developing and verifying individual robot specifications, but can also be used for such purposes as prototype testing, type testing or acceptance testing. To compare performance characteristics between different robots, as defined in this International Standard, the following parameters have to be the same: test cube sizes, test loads, test velocities, test paths, test cycles, environmental conditions. Annex A provides parameters specific for comparison testing of pose-to-pose characteristics and path characteristics. This International Standard applies to all manipulating industrial robots as defined in ISO 8373. However, for the purpose of this International Standard the term "robot" means manipulating industrial robot.

Manipulating industrial robots - Performance criteria and related test methods

BS IEC 61747-3-1:1998 液晶和固态显示装置.液晶显示器(LCD).空白详细规范

Liquid crystal and solid state display devices. Liquid crystal display (LCD) cells. Blank detail specification

BS IEC 61747-1:1998 液晶和固态显示装置.一般规范

This part of IEC 61747 is a generic specification for liquid crystal and solid-state display devices. It defines general procedures for quality assessment to be used in the IECQ system and gives general rules for measuring methods of electrical and optical characteristics, rules for climatic and mechanical tests, and rules for endurance tests.

Liquid crystal and solid state display devices. Generic specification

BS EN 61747-3:2000 液晶和固态显示装置.液晶显示元件(LCD)的分规范

This sectional specification applies to liquid crystal cells of the segment type monochrome liquid crystal display cells. It gives details of the quality assessment procedures, the inspection requirements, screening sequences, sampling requirements and test and measurement procedures required for the assessment of liquid crystal display cells. Instead of the qualification approval procedure, it is allowed to apply the capability approval procedure (see rules of procedure QC 001002, subclause 11.7, but at present capability approval procedure for the liquid crystal display cells is under consideration) for all products manufactured in a defined process. All the requirements of this specification remain valid, unless modified by the requirements set out in 4.7.

Liquid crystal and solid-state display devices - Sectional specification for liquid crystal display (LCD) cells