N38 光学设备 标准查询与下载



共找到 42 条与 光学设备 相关的标准,共 3

General specifications for lunar and planetary in-situ detection cameras

ICS
17.180.01
CCS
N38
发布
2023-11-27
实施
2023-11-27

General specification for spaceborne opto-electronic tracking and imaging system

ICS
37.020
CCS
N38
发布
2017-12-29
实施
2018-04-01 00:00:00.0

本标准规定了工业制造用激光器光束质量的评价和测试方法。 本标准适用于各种连续和准连续激光器光束质量的评价和测试。

Evaluation and measurement method for beam quality of high power laser system for industry manufacturing

ICS
31.260
CCS
N38
发布
2009-11-15
实施
2010-02-01

This document applies to cylindrical connections between the spindle and the workpiece chuck, workpiece carrier or tool. The connection is intended for all optical machines which allow the technically required processing speeds.

Production in optical engineering - Fitting dimensions for tools and workpiece chucks with cylindrical fitting

ICS
CCS
N38
发布
2021-04-00
实施

Production in optical engineering - Sintered diamond abrasive body - Part 2: Pellets and grinding pins

ICS
37.020
CCS
N38
发布
2015-12
实施

Production in optical engineering - Surfacing pins for optics processing machines - Part 1: Without ball point cemented metal carbide

ICS
37.020
CCS
N38
发布
2015-09
实施

Optics and photonics. Interferometric measurement of optical elements and optical systems. Interpretation and evaluation of tolerances specified in ISO 10110

ICS
37.020
CCS
N38
发布
2015-07-31
实施
2015-07-31

Production in optical engineering - Small lenses - Carriages and supporting mounts

ICS
37.020
CCS
N38
发布
2015-05
实施

Optics and photonics. Optical materials and components. Test method for refractive index of infrared optical materials

ICS
37.020
CCS
N38
发布
2014-10-31
实施
2014-10-31

This International Standard provides a standard method for measuring the relative refractive index to the air of infrared materials used in the infrared spectral range from 0,78 µm to 25 µm. The scope of this International Standard excludes methods for measuring the refractive index of birefringent materials and methods for measuring the complex refractive index.

Optics and photonics - Optical materials and components - Test method for refractive index of infrared optical materials

ICS
37.020
CCS
N38
发布
2014-10
实施

Optics and photonics - Wavefront sensors for characterising optical systems and optical components

ICS
37.020
CCS
N38
发布
2013-03
实施

This part of ISO 9022 specifies methods for the testing of optical instruments, including additional assemblies from other fields (e.g. mechanical, chemical and electronic devices) under equivalent conditions, for their ability to resist combined bump or random vibration, in cold, dry heat or temperature change. The purpose of testing is to investigate to what extent the optical, thermal, chemical and electrical performance characteristics of the specimen are affected by combined cold, dry heat or temperature change with bump or random vibration.

Optics and photonics - Environmental test methods - Part 22: Combined cold, dry heat or temperature change with bump or random vibration

ICS
37.020
CCS
N38
发布
2012-04
实施

This part of ISO 25297 specifies the information requirements for optical systems and parts, and provides an information model to support the processes of optical design, optical evaluation and analysis for these optical systems and parts when using computers with CAD and CAE. NOTE Generally, an optical system means an optical unit as an optical product, which performs optical functions, and is composed of optical elements and the barrels in which these elements are mounted. In this part of ISO 25297, an optical system is a collection of optical parts and optical assemblies, e.g. the viewfinder system or the taking lens system of a leaf shutter camera. This information model adds the data peculiar to optical design specification based on STEP to ISO 10303 (all parts). The additional information is product specification information, optical design information, optical evaluation information and analysis information. This part of ISO 25297 is generically called the Neutral Optical Data Interchange Format (NODIF). The following are within the scope: — information on product specification, optical design, optical evaluation and analysis; — optical systems and parts in imaging systems, such as cameras and copiers, viewing systems for telescopes and microscopes and the other optical systems, such as projectors and pick-up lenses; — multiple-configuration optical systems, including zoom lenses and inner focusing systems; — optical path definition, including ray-path sequence and optical surface arrangement; — optical assemblies, including cemented parts and dynamic parts; — mathematical description of the optical surface form; — description of diffractive surfaces; — machining process designation, such as polishing, moulding or replicating; — optical material specifications, such as material names, lot numbers and measured refractive indices; — optical tolerances for the shape and material property of each optical part; — assembly tolerances, such as separation, parallelism, displacement and tilt; — effective diameters, coatings and protective surface treatment; — paraxial evaluation, such as focal length, back focal length, principal points and f-number; — ray-tracing evaluation, such as geometrical ray-tracing results (i.e. ray directions and intersection points on each surface and optical path lengths), aberrations and wavefront aberration; — OTF evaluation based on geometrical and/or physical optics; — illuminance distribution on a detection surface or a projection surface; — spectral characteristics;  1 — ghost image evaluation; — thermal analysis accompanying optical surface deformation and material property value change; — stress analysis accompanying optical surface deformation and material property value change; — veiling glare and surface imperfections. The following are outside the scope of this part of ISO 25297: — mechanical design, electronic design and embedded software design; — optical systems in which the optical path is changeable, e.g. beam splitters or variable magnification converters; — tolerances for mechanical parts; — parts with a diameter less than 10 times the wavelength of light; — parts made from materials whose dielectric constant, σ, electric permittivity, ε, and magnetic permittivity, µ, are uninfluenced by interaction between the materials and the light; — graphical documents resulting from design, evaluation and analysis of products; — optical wave guide for optical communications; — product planning information concerning market research and customer analysis; — product definition and configuration control information irrelevant to design, evaluation and analysis; — analysis information, except thermal and stress analysis, e.g. vibration analysis; — information on trial production, production process including production planning and production control, and processes after production, such as shipment and repair; — ophthalmic optics.

Optics and photonics - Electronic exchange of optical data - Part 1: NODIF information model

ICS
37.020
CCS
N38
发布
2012-03-01
实施

Optics and photonics. Electronic exchange of optical data. Mapping to the classes and properties defined in ISO 23584

ICS
37.020
CCS
N38
发布
2012-01-31
实施
2012-01-31

이 표준은 ISO 6489-3에 따라 클레비스 형의 농업용 트랙터 드로바(drawbar)에

Agricultural equipment-Mechanical connections between towed and towing vehicles-Implement hitch rings and attachment to tractor drawbars

ICS
65.060.10
CCS
N38
发布
2011-12-30
实施
2011-12-30

Optics and photonics - Electronic exchange of optical data - Part 2: Mapping to the classes and properties defined in ISO 23584

ICS
37.020
CCS
N38
发布
2011-12
实施

이 표준은 낮은 조명 조건에서의 구조, 어둠 속에서의 긴급 수리, 야간 감시 등 야간의 관

Optics and photonics-Telescopic systems-Specifications for night vision devices

ICS
37.020
CCS
N38
发布
2011-01-14
实施
2011-01-14

Optics and photonics. Preparation of drawings for optical elements and systems. Surface texture; roughness and waviness

ICS
01.100.20;37.020
CCS
N38
发布
2010-10-31
实施
2010-10-31

This part of ISO 25297 specifies the information requirements for optical systems and parts, and provides an information model to support the processes of optical design, optical evaluation and analysis for these optical systems and parts when using computers with CAD and CAE.

Optics and photonics - Electronic exchange of optical data - Part 1: NODIF information model

ICS
37.020
CCS
N38
发布
2010-08
实施

Optics and photonics - Optical coatings - Part 2 : optical properties.

ICS
37.020
CCS
N38
发布
2010-06-01
实施
2010-06-12



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号