P90 工业设备安装工程综合 标准查询与下载

GB 51037-2014 微组装生产线工艺设备安装工程施工及验收规范

本规范适用于新建、改建及扩建的微组装生产线工艺设备的安装工程施工、调试、试运行及验收。

Code for construction and acceptance of micro-assembling production line process equipment installation engineering

GB/T 50904-2013 非织造布设备工程安装与质量验收规范

本规范适用于以天然纤维、化学纤维为主要原料的梳理成网法、气流成网法非织造布设备及以聚合物为原料的熔融纺丝成网法非织造布设备工程的安装与质量验收。

Code for installation and quality acceptance of nonwoven equipments engineering

GB 50856-2013 通用安装工程工程量计算规范

本规范适用于工业、民用、公告设施建设安装工程的计量和工程计量清单编制。 通用安装工程计价，必须按本规范规定的工程量计算规则进行工程计量。

Standard method of measurement for general building services works

GB 50677-2011 空分制氧设备安装工程施工与质量验收规范

本规范适用于低温法空气分离设备安装工程和常温吸附法空气分离设备安装工程的施工与质量验收。

Code for construction and acceptance of oxygen plant equipment installation engineering

GB/T 50670-2011 机械设备安装工程术语标准

本标准适用于金属切削机床、锻压设备、风机、压缩机、泵、制冷设备、空气分离设备、起重设备、铸造设备、破碎设备、粉磨设备、输送设备、锅炉的安装工程。

Terminology standard for mechanical equipment installation

GB 50252-2010 工业安装工程施工质量验收统一标准

本标准适用于工业安装工程施工质量的验收。

Unified standard for constructional quality acceptance of industrial installation engineering

GB 50461-2008 石油化工静设备安装工程施工质量验收规范

本规范适用于石油化工建设工程整体安装设备和现场组焊设备及其专用内件、安全附件、设备附属梯子、平台等安装工程施工质量的验收。 本规范不适用于立式圆筒形储罐、气柜和非金属设备施工质量的验收。

Code for quality acceptance of static equipment installation in petrochemical engineering

GB/T 50311-2000 建筑与建筑群综合布线系统工程设计规范

1.0.2本规范适用于新建、扩建建筑与建筑群的综合布线系统工程设计。

Code for engineering design of generic cabling system for building and campus

GB/T 50312-2000 建筑与建筑群综合布线系统工程验收规范

1.0.2本规范适用于新建、扩建建筑与建筑群的综合布线系统工程设计。

Code for engineering acceptance of generic cabling system for building and campus

GB 50252-1994 工业安装工程质量检验评定统一标准

本标准适用于工业设备、工业管道、电气装置、自动化仪表、防腐蚀、绝热、工业炉砌筑等安装工程的质量检验评定。

Unified standard for quality inspection and assessment of industrial erection engineerings

JC/T 60003-2019 工业用微晶板材安装工程技术规范

Technical specifications for installation engineering of microcrystalline panels for industrial use

BS EN 60950-22:2017 信息技术设备.安全性.室外安装的设备

Information technology equipment. Safety. Equipment to be installed outdoors

DB11/T 1384-2016 室内钢索支吊架施工规程

Indoor steel cable support and hanger construction regulations

EN ISO 20109:2016 同声传译设备要求(ISO 20109:2016)

Dieses Dokument legt die Anforderungen für die Ausstattung fest, die für Simultandolmetschen verwendet wird. Zugangsanforderungen sind in Anhang A festgelegt. Anforderungen an die Möbel für die Kabinen sind in Anhang B festgelegt. Anforderungen an den Anlagenbetrieb sind in Anhang C festgelegt. In Verbindung mit ISO 2603 bzw. ISO 4043 legen ISO 20108 und dieses Dokument die maßgeblichen Anforderungen sowohl für die Qualität und die Übertragung von Ton und Bild an die Dolmetscher als auch für die in den Kabinen benötigte Ausstattung fest.

Simultaneous interpreting - Equipment - Requirements

TSG ZF003-2011 爆破片装置安全技术监察规程

本规程适用《条例》所规定特种设备使用的爆破片装置。 本规程规定了爆破片装置的材料、设计、制造、检验、安装、使用等过程以及制造许可、型式试验、监督检验工作的基本安全要求。相应技术标准、管理制度等的有关规定不得低于本规程要求。

Safety Technical Supervision Regulations for Bursting Disc Devices

EN 12921-1:2005+A1:2010 表面清洁和使用液体和蒸气的工业项目预处理设备.第1部分:常见的安全要求

This standard applies to machines for surface cleaning and pre-treatment - in the following called "cleaning machines" - of industrial items using liquids or vapours, i.e. stationary machines and related equipment for automated and manual cleaning and pre-treatment processes. NOTE Cleaning machines are operated with or without heating, for example as dipping or spraying or vapour condensation process, where additional using of ultrasound is possible. These cleaning machines could be designed as single-zone or multi-zone machine, chamber machines, drum cleaning machine, low lift truck machines, round time machines or tunnel (continuous) machines. To the extent of this document, cleaning machines for industrial items are considered as an assembly of the following equipment: pump(s) and/or other mechanical system of agitation, recirculation and spraying of cleaning liquid; forced ventilation system; heating system with temperature control; condensation system; filtration and separation system and/or solid particles extraction from the liquid; conveyor and/or handling system for the items to be processed; product handling systems and reciprocators which are part of the cleaning machine; control and/or monitoring systems; liquid handling system. This European Standard deals with the common significant hazards, hazardous situations and events relevant to cleaning machines for industrial items using liquids or vapours when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This part of the standard defines the common safety requirements for all kinds of cleaning machines for industrial items using liquids or vapours and related common devices and should be used in connection with other parts of the EN 12921-series. The specific requirements specified in part 2 and following parts of EN 12921 take precedence over the respective requirements in EN 12921. NOTE In addition, where a cleaning machine is not covered by a specific part of this document, part 1 of EN 12921 can be used to establish the approach for dealing with the relevant risks. Specific hazards which are related to the type of cleaning liquid used are dealt with in the following documents: EN 12921-2 for water based cleaning liquids; EN 12921-3 for flammable cleaning liquids; prEN 12921-4 for halogenated solvents. This standard is not applicable to machines for: mobile portable cleaning; high pressure cleaning with high pressure water jet according to prEN 1829-1; conveyor dishwashing according to EN 50416; surface cleaning employing liquids according to EN 60335-2-54; commercial electric dishwashing according to EN 60335-2-58; cleaning with high pressure and steam according to EN 60335-2-79; plasma cleaning; mechanical blasting; thermal cleaning; drying processes; cleaning of textiles or clothes; food processing. This standard is not applicable to the following equipment; loading and unloading systems; automatic systems, e. g. robots as covered by EN ISO 10218-1; centrifuges as covered by EN 12547; pumps and pump units for liquids as covered by EN 809. This standard is not applicable to cleaning machines for industrial items which are manufactured before the date of publication of this document by CEN.

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements

EN 12921-4:2005+A1:2008 表面清洁和使用液体和蒸气的工业项目预处理设备.第4部分:使用卤化溶剂的机械的安全性

This European Standard specifies the significant hazards of machines for surface cleaning and pre-treatment - in the following called "cleaning machines" - of industrial items using halogenated solvents, either pure or as a mixture. This European Standard applies together with EN 12921-1:2005. Both parts together cover all significant hazards relevant for cleaning machines of industrial items using liquids or vapours, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). The specific requirements specified in Part 4 take precedence over the respective requirements in EN 12921-1:2005. This European Standard applies together with EN 12921-3 in case of release of flammable vapours from the cleaning liquids. This European Standard does not apply to machinery and related equipment excluded from the scope of EN 12921-1:2005. This European Standard is not applicable to cleaning machines which are manufactured before the publication of this European Standard by CEN.

Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents

EN 12921-2:2005+A1:2008 表面清洁和使用液体和蒸气的工业项目预处理设备.第2部分:使用水基清洗液的机器的安全性

This European Standard deals only with the significant hazards of machines for surface cleaning and pre-treatment (in the following called "cleaning machines") of industrial items using water based cleaning liquids in the mode of suspension, solution or dispersion of compounds or substances in water applied by immersion and/or spraying in one or more stages. This European Standard applies in combination with EN 12921-1. Both parts together cover all significant hazards relevant for cleaning machines for industrial items using liquids or vapours, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). The specific requirements specified in this standard take precedence over the respective requirements in EN 12921-1. This standard should be applied together with EN 12921-3 in case of release of flammable vapours from water based cleaning liquids. This European Standard applies together with EN 12921-3 and prEN 12921-4 in case of use of water based cleaning liquids of which evaporating can lead to hazards caused by explosive atmospheres. Water based cleaning liquids containing a quantity of halogenated solvents exceeding 2 % of the volume are considered hazardous with respect to the creation of a potentially explosive atmosphere. This European Standard does not apply to machinery and related equipment excluded from the scope of EN 12921-1. This European Standard does not apply to cleaning machines for industrial items using water based cleaning liquids which are manufactured before the publication of this standard by CEN.

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids

EN 12921-3:2005+A1:2008 表面清洁和使用液体和蒸气的工业项目预处理设备.第2部分:使用易燃清洁液的机械安全

This European Standard deals with the significant hazards of machines for surface cleaning and pre-treatment - in the following called "cleaning machines" - of industrial items using flammable cleaning liquids or a mixture of cleaning liquids, even in emulsion form, which can potentially create, even temporarily, a condition of flammability. This European Standard applies in combination with EN 12921-1. Both parts together cover all significant hazards relevant for cleaning machines of industrial items using liquids or vapours, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). The specific requirements specified in this European Standard take precedence over the respective requirements of EN 12921-1. To the extent of this document the terms combustible materials and flammable substance and explosive are equivalently used. NOTE 1 The condition of flammability can be generated only when molecules of the fluid are in intimate contact with oxygen from the air. Ignition is possible when: the fluid generates a concentration of vapour in air, or: the flammable fluid is present as a suspension of fine droplets in air (aerosol). NOTE 2 In practice, fires and explosions differ by the size and intensity of the reaction, and by the instantaneous effects on the environment. This European Standard does not apply to machinery and related equipment excluded from the scope of EN 12921-1. This European Standard is not applicable to cleaning machines of industrial items using flammable cleaning liquids which are manufactured before the publication of this European Standard by CEN.

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids

DL/T 5372-2007 水电水利工程金属结构与机电设备安装安全技术规程

本标准规定了水电水利工程现场金属结构制作、安装和水轮 发电机组及电气设备的安装的安全技术要求。 本标准适用于大中型水电水利工程现场金属结构制作、安装 及水轮发电机组和电气设备安装工程的安全技术管理、安全防护与安全施工。小型水电水利工程现场金属结构制作、安装和水轮发电机组及电气设备的安装工程可参照执行。

Technical specification for safety of installation of metal structure and mechanical &electrical equipment of hydroelectric and hydraulic engineering