P92 电信设备安装工程 标准查询与下载

GB 50918-2013 城镇建设智能卡系统工程技术规范

Technical specification for urban construction smart card system engineering

GB 50725-2011 液晶显示器件生产设备安装工程施工及验收规范

本规范适用于液晶显示器件生产设备安装工程的施工及验收。

Code for construction and acceptance of liquid crystal display manufacturing equipment installation engineering

GB/T 50605-2010 住宅区和住宅建筑内通信设施工程设计规范

为了适应城市建设与信息网络的发展，促进城市住宅中语音、数据、图像、多媒体等综合业务通信网络建设，满足居民对通信业务的需要，实现资源共享、避免重复建设，制定本规范。 本规范适用于新建住宅区地下通信管道和住宅建筑内通信设施工程的设计，以及既有住宅建筑通信设施的改、扩建工程设计。

Code for design of communication engineering in residential districts and residential buildings

GB 50115-2009 工业电视系统工程设计规范

本规范适用于新建、改建和扩建的工业电视系统工程设计。对改建和扩建的工程项目,应从实际出发,有效利用已有资源。

Code for design of industrial television system

GB 50217-1994 电力工程电缆设计规范

本规范适用于新建、扩建的电力工程中220kV及以下电力电缆和控制电缆的选择与敷设设计。

Code for design of cables of electric work

GB 14821.1-1993 建筑物的电气设施 电击防护

本标准规定了标称电压工频交流1000V及以下，直流1500V及以下的电气装置电击防护的要求。以及防护措施的应用要求。 本标准适用于住房、工业、农业、商业用房屋、公共性房屋、活动性建筑物、旅游车及类似场所内的电气装置以及建筑工地、展览馆内的临时性装置。 本标准不适用于电力牵引设备、汽车用电气设备、船舶用电气设备、飞机用电气设备、公共道路照明装置、矿用装置、抗无线电干扰设备（除非该设备影响到装置的安全）、建筑物防雷。

Electric shock protection of electrical installations in buildings

GBJ 42-1981 工业企业通信设计规范

本规范适用于一般工业企业新建、扩建和改建工程。对于扩建和改建的工程，应从实际出发，充分利用原有设施。

Code for design of telecommunication in industrial enterprises

YD/T 5186-2021 通信系统用室外机柜安装设计规范

Design specifications for installation of outdoor cabinets for communication systems

YD/T 5027-2021 通信电源集中监控系统工程技术规范

Engineering technical specifications for centralized monitoring and control systems for communication power supply

YD/T 5167-2021 通信用柴油发电机组消噪音工程技术规范

Technical Specifications for Noise Abatement Engineering of Diesel Generator Sets for Telecommunications

YD/T 5141-2021 数字微波接力通信系统工程验收规范

Digital microwave relay communication system engineering acceptance specifications

YD/T 5263-2021 数字蜂窝移动通信网5G核心网工程技术规范

Digital cellular mobile communication network 5G core network engineering technical specifications

YD/T 5264-2021 数字蜂窝移动通信网5G无线网工程技术规范

Digital cellular mobile communication network 5G wireless network engineering technical specifications

YD/T 5258-2021 信息通信网络功能虚拟化（NFV）工程技术规范

Information and communication network function virtualization (NFV) engineering technical specifications

YD/T 5026-2021 信息通信机房槽架安装设计规范

Information and communication equipment room trough installation design specifications

YD/T 5200-2021 分组传送网（PTN）工程技术规范

Packet Transport Network (PTN) Engineering Technical Specifications

DIN EN ISO 22510:2021 建筑物自动控制和建筑物管理中的开放数据通信 家庭和建筑物电子系统 第2部分：KNXnet/IP通信(ISO 22510-2019) 德文版本EN ISO 22510-2020

This European Standard defines the integration of KNX protocol implementations on top of Internet Protocol (IP) networks, called KNXnet/IP. It describes a standard protocol for KNX devices connected to an IP network, called KNXnet/IP devices. The IP network acts as a fast (compar

Open data communication in building automation, controls and building management - Home and building electronic systems - KNXnet/IP communication (ISO 22510:2019); German version EN ISO 22510:2020, only on CD-ROM

DIN EN 50090-5-1:2021 家用和建筑物用电子系统(HBES). 第5-1部分: 介质和介质相关层. 1类HBES用输电线; 英文版本EN 50090-5-1-2020

This document defines the mandatory and optional requirements for the medium specific physical and data link layer of power line Class 1 PL110. Data link layer interface and general definitions, which are medum independent, are given in EN 50090-4-1.

Home and Building Electronic Systems (HBES) - Part 5-1: Media and media dependent layers - Power line for HBES Class 1; English version EN 50090-5-1:2020

DIN EN 50090-5-2:2021 家用和建筑物用电子系统(HBES). 第5-2部分: 介质和介质相关层. 基于HBES1类的双扭线网络; 英文版本EN 50090-5-2-2020

This document defines the mandatory and optional requirements for the medium specific physical and data link layer for HBES Class 1 Twisted Pair TP1. Data link layer interface and general definitions, which are media independent, are given in EN 50090-4-2.

Home and Building Electronic Systems (HBES) - Part 5-2: Media and media dependent layers - Network based on HBES Class 1, Twisted Pair; English version EN 50090-5-2:2020

IEC 61918:2018 工业通讯网络. 工业建筑物中通信网络的安装

This document specifies basic requirements for the installation of media for communication networks within and between the automation islands, of industrial sites. This document covers balanced and optical fibre cabling. It also covers the cabling infrastructure for wireless media, but not the wireless media itself. Additional media are covered in IEC 61784-5 (all parts). This document is a companion standard to the communication networks of the industrial automation islands and especially to the communication networks specified in IEC 61158 (all parts) and IEC 61784 (all parts). In addition, this document covers the connection between the generic telecommunications cabling specified in ISO/IEC 11801-3 and the specific communication cabling of an automation island, where an automation outlet (AO) replaces the telecommunication outlet (TO) of ISO/IEC 11801-3. NOTE If the interface used at the AO does not conform to that specified for the TO of ISO/IEC 11801-3, the cabling no longer conforms to ISO/IEC 11801-3 although certain features, including performance, of generic cabling may be retained. This document provides guidelines that cope with the critical aspects of the industrial automation area (safety, security and environmental aspects such as mechanical, liquid, particulate, climatic, chemicals and electromagnetic interference). This document does not recognise implementations of power distribution with or through Ethernet balanced cabling systems. This document deals with the roles of planner, installer, verifier, and acceptance test personnel, administration and maintenance personnel and specifies the relevant responsibilities and/or gives guidance.

Industrial communication networks - Installation of communication networks in industrial premises