Q38 铸石 标准查询与下载

JC/T 515-2015 单一玄武岩铸石制品

本标准规定了单一玄武岩铸石制品(以下简称铸石)的术语和定义、分类和规格、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。本标准适用于用单一玄武岩原料生产的铸石制品。

Mono-cast basalt stone product

JC/T 2305-2015 铸石耐磨球阀

本标准规定了铸石耐磨球阀的术语和定义、型号命名方法、材料、要求、试验方法、检验规则以及标志、包装、运输和贮存。本标准适用于公称压力不大于PN100，公称尺寸DN50~DN800，使用介质温度在-29℃~120℃的法兰连接和卡箍式柔性管接头连接的钢制铸石耐磨球阀(以下简称球阀)。

Cast stone wear-resistant ball valve

JC/T 2306-2015 铸石耐磨闸阀

本标准规定了铸石耐磨闸阀的术语和定义、型号命名方法、材料、要求、试验方法、检验规则以及标志、包装、运输和贮存。本标准适用于公称压力不大于PN63、公称尺寸DN50~DN800、使用介质温度在－29℃~120℃的铸石耐磨闸阀(以下简称闸阀)。

Cast stone wear-resistant gate valve

JC/T 2204-2014 铸石及其应用术语

本标准规定了铸石、铸石品种、物化性能、铸石原料、铸石的生产工艺、铸石应用等方面的有关术语及其定义。本标准适用于铸石的生产与产品应用所涉及的术语解释。

Standard terminology for cast stone and its application

BS 1217:2008 铸石.规范

This British Standard specifies performance requirements for cast stone products other than for those products conforming to BS 5642-1, Sills, BS 5642-2, Copings, BS EN 771-5, Manufactured stone masonry units and BS EN 845-2, Lintels, which contain product specific requirements.

Cast stone - Specification

JC/T 260-2001 铸石制品性能试验方法 耐磨性试验

Testing methods for the properties of cast stone products Resistance-to-abrasion test

JC/T 514.3-2001 铸石制品 第3部分:铸石粉

Cast stone product-Part 3: Cast stone powder

JC/T 515-2001 单一玄武岩铸石制品

Smelt Mono-Basalt product

ASTM D897-01 胶粘剂粘结力的抗拉性的标准试验方法

1.1 This test method covers the determination of the comparative tensile properties of the adhesive bonds when tested on standard shape specimens and under defined conditions of pretreatment, temperature, and testing machine speed. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Tensile Properties of Adhesive Bonds

ASTM D897-01e1 胶粘剂粘结力的抗拉性的标准试验方法

This test method is primarily comparative. However, it does have application as a discriminator in determining variations in adherend surface preparation parameters and adhesive environmental durability. The test method has found applications in controlling surface preparations, primer, and adhesive systems for determining strength properties of tested systems. 1.1 This test method covers the determination of the comparative tensile properties of the adhesive bonds of metal to metal when tested on standard shape specimens and under defined conditions of pretreatment, temperature, and testing machine speed.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Tensile Properties of Adhesive Bonds

ASTM D899-00 单位面积涂用液体胶粘剂重量的标准试验方法

1.1 This practice provides a procedure for the estimation of the quantity of liquid adhesive applied in a spreading or coating operation. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive

ASTM D897-00 胶粘剂粘结力的抗拉性的标准试验方法

1.1 This test method covers the determination of the comparative tensile properties of the adhesive bonds when tested on standard shape specimens and under defined conditions of pretreatment, temperature, and testing machine speed. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Tensile Properties of Adhesive Bonds

ASTM D899-00(2007) 单位面积涂用液体胶粘剂重量的标准试验方法

For the bonding of adherends, the amount of adhesive present is critical and it is important to understand that this practice does not ensure sufficient adhesive is present on the adherend surface. This practice can be used to supplement industry uses such as that of visually checking the spread or the use of mil-thickness gages. In laboratory and industrial operations, hand or mechanical application of adhesives can be duplicated for cost savings using this practice.1.1 This practice provides a procedure for the estimation of the quantity of liquid adhesive applied in a spreading or coating operation.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive

BS 1217:1997 铸石规范

Requirements for either homogeneous or two part mix. Alternative tests for capillary absorption and ISAT. Also includes reinforcement , surface finish, tolerances and dimensional accuracy of product.

Specification for cast stone

JC/T 514.1-1993 铸石制品 铸石板

Cast stone products. Cast stone plates

JC/T 254-1993 铸石化学分析方法

Chemical analysis method of cast stone

JC/T 258-1993 铸石制品性能试验方法 耐酸、碱性能试验

Performance test method for cast stone products. Acid and alkali resistance test

JC/T 259-1993 铸石制品性能试验方法 冲击韧性试验

Performance test method for cast stone products. Impact toughness test

JC/T 261-1993 铸石制品性能试验方法 耐急冷急热性能试验

Performance test method for cast stone products. Thermal shock resistance test

JC/T 262-1993 铸石制品性能试验方法 压缩强度试验

Performance test method for cast stone products. Compression strength test