Q60 其他非金属矿制品综合 标准查询与下载
共找到 35 条与 其他非金属矿制品综合 相关的标准，共 3 页
GB/T 5463的本部分规定了非金属矿产品通用的术语和定义。本部分适用于非金属矿地质勘探,非金属矿产品加工、检验、贸易、科研和教学等领域。
Non metallic mineral products vocabulary.Part 1:General vocabulary
- ICS
- 73.080
- CCS
- Q60
- 发布
- 2012-12-31
- 实施
- 2013-09-01
本标准规定了光伏玻璃用硅质原料(以下简称“硅质原料”)的要求、试验方法、检验规则以及标志、运输和贮存。本标准适用于生产光伏玻璃所用的天然产出的硅质原料。
Siliceous material for photovoltaic glass
- ICS
- 73.080
- CCS
- Q60
- 发布
- 2015-07-14
- 实施
- 2016-01-01
Reaction to fire tests for building products exposed to the thermal attack by a single burning item
- ICS
- 13.220.50
- CCS
- Q60
- 发布
- 2015-07-14
- 实施
This European Standard specifies requirements for flat modular tiles of natural stone which are made for internal (including enclosed public transport premises) and/or external uses as floorings, stairs and wall and ceiling finishes. This European Standard does not cover mineral aggregates and artificial agglomerated stone material and does not cover installation.
Natural stone products - Modular tiles - Requirements
- ICS
- 91.100.15
- CCS
- Q60
- 发布
- 2015-03
- 实施
This European Standard specifies requirements for flat natural stone slabs used as paving units for internal (including enclosed public transport premises) and/or external uses in floors and stairs including skirtings. This European Standard does not cover mineral aggregates and artificial agglomerated stone material and does not cover installation.
Natural stone products - Slabs for floors and stairs - Requirements
- ICS
- 91.100.15
- CCS
- Q60
- 发布
- 2015-03
- 实施
This European Standard specifies the reference method, used for type testing and in case of dispute, for determining the water suction height of an aggregate in direct contact with a free water surface. For other purposes, in particular production control, other methods may be used, provided that an appropriate working relationship with the reference methods has been established. NOTE Capillary water uptake in an aggregate layer under the ground floor may cause moisture problems in the building. If the layer is thicker than the water suction height of the aggregate used, the layer is considered as a capillary barrier.
Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height
- ICS
- 91.100.15
- CCS
- Q60
- 发布
- 2014-05
- 实施
This European Standard specifies the reference method used for type testing, and in case of dispute, for determining the flow coefficient of coarse and fine aggregates. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. Examples of advanced test methods can be found in the Bibliography. This European Standard applies to coarse aggregate of sizes between 4 mm and 20 mm and to fine aggregate of size up to 2 mm. NOTE 1 For coarse aggregates between 4 mm and 20 mm, the flow coefficient is linked with the percentage of crushed or broken surfaces of an aggregate and can therefore be used in association with the method specified in EN 933-5. Shape and surface texture characteristics also influence the result. NOTE 2 Experience of this test has been generally limited to natural aggregates.
Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates
- ICS
- 91.100.15
- CCS
- Q60
- 发布
- 2014-04
- 实施
This European Standard specifies the reference test method used for type testing, and in case of dispute, for determining the resistance to disintegration of lightweight aggregates (LWA) in accordance with EN 13055. For other purposes, in particular for factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established The test is applicable to LWA with particle size no lower than 4 mm and up to a maximum size of 32 mm.
Tests for thermal and weathering properties of aggregates - Part 8: Determination of resistance to disintegration of Lightweight Aggregates
- ICS
- 91.100.15
- CCS
- Q60
- 发布
- 2014-04
- 实施
This European Standard specifies the reference test method used for type testing, and in case of dispute, for determining the resistance to freezing and thawing of lightweight aggregates (LWA) in accordance with EN 13055. For other purposes, in particular for factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. The test is applicable to LWA with particle size not less than 4 mm and up to a maximum size of 32 mm.
Tests for thermal and weathering properties of aggregates - Part 7: Determination of resistance to freezing and thawing of Lightweight aggregates
- ICS
- 91.100.15
- CCS
- Q60
- 发布
- 2014-04
- 实施
This European Standard describes the reference method, used for type testing and in case of dispute, for determination of the resistance of coarse aggregate to wear by abrasion from studded tyres. For other purposes, in particular factory production control, other methods may be used, provided that an appropriate working relationship with the reference method has been established. The test is applicable to aggregates with a size fraction of 11,2 mm to 16 mm. NOTE An alternative size fraction 8/11,2 mm for different end uses is given in Annex A.
Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test
- ICS
- 91.100.15
- CCS
- Q60
- 发布
- 2014-01
- 实施
이 표준은 소음의 저감을 위해 설치되는 방음벽의 일부를 구성하는 방음판 중 목재 방음판(이하 방음판이라 한다.)에 대하여 규정한다.
Soundproof panel - Wooden
- ICS
- 91.120.20
- CCS
- Q60
- 发布
- 2013-12-09
- 实施
- 2013/12/9
이 표준은 소음의 저감을 위해 설치되는 방음벽의 일부를 구성하는 방음판 중 비금속재 컬러 방음판(이하 방음판이라 한다.)에 대하여 규정한다.
Soundproof panel - Non metallic colored
- ICS
- 91.120.20
- CCS
- Q60
- 发布
- 2013-12-09
- 实施
- 2013/12/9
Calcination-free desulfurization gypsum-based derivative products (painting mortar, blocks and soil stabilizer) application technical regulations
- ICS
- 91.100.10
- CCS
- Q60
- 发布
- 2012-10-23
- 实施
- 2013-02-01
이 표준은 건축물의 미장 공사에 사용하는 돌로마이트 플라스터(이하 플라스터라 한다.)에 대
Dolomite plaster
- ICS
- 91.100.10
- CCS
- Q60
- 发布
- 2012-05-10
- 实施
- 2012-05-10
이 표준은 인조 대리석 욕조의 충전 소재로 사용되는 정제 가공 분말인 수산화알루미늄[AI(
Test method of filler materials for artificial marble bathtubs
- ICS
- 91.140.70
- CCS
- Q60
- 发布
- 2010-10-18
- 实施
- 2010-10-18
이 표준은 건축물의 벽면, 천장면 등에 폴리스티렌 폼 보드 또는 경질 우레탄 폼 보드(이하
Adhesives for plastic foam boards
- ICS
- 91.100.50
- CCS
- Q60
- 发布
- 2010-06-29
- 实施
- 2010-06-29
이 표준은 비닐계 바닥재의 보강에 사용하는 접착제(이하 접착제라 한다.)에 대하여 규정한다
Adhesives for PVC floorcovering
- ICS
- 91.100.50
- CCS
- Q60
- 发布
- 2010-06-29
- 实施
- 2010-06-29
이 표준은 건물벽, 천장 등에 마감재로 벽지를 붙이는 경우, 현장에서 도포 사용하는 전분계
Starch adhesives for wall paper and wall coverings
- ICS
- 91.100.50
- CCS
- Q60
- 发布
- 2010-06-29
- 实施
- 2010-06-29
