Q80 公用与市政建设器材设备综合 标准查询与下载

ANSI/ASTM F2390:2021 具有工业后回收成分的聚氯乙烯(PVC)塑料排水、废物和通风(DWV)管和配件的标准规范

Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content

DB31/ 623-2021 自来水制水单位产品能源消耗限额

Energy Consumption Quotas for Tap Water Production Unit Products

BS 5834-1:2017 用于公用设施的地面箱、防护装置和地下房间 防护装置和底座规范

Surface boxes, guards and underground chambers for the purposes of utilities. Specification for guards and plinths

DB32/T 3147-2016 自来水（制水）单位产品 可比综合电耗限额及计算方法

本标准规定了自来水（制水）单位产品可比综合电耗限额的术语和定义、要求、统计范围、计算方法、主要节能管理与措施。 本标准适用于自来水公司（水务公司）、自来水总公司（水务集团公司）下属各水厂等自来水生产企业的能源消耗量的计算、控制和考核、评价。

Comparable comprehensive power consumption quota and calculation method for unit product of tap water (water production)

DB37/T 5053-2016 装配式结构独立钢支柱临时支撑系统应用技术规程

本规程适用于装配式结构预制混凝土梁、板的施工中采用独立钢支柱临时支撑系统的设计、施工、使用及管理。

Technical specification for application of temporary support system for independent steel pillars of prefabricated structures

DB11/T 313-2012 扫路机试验方法

Road sweeper test method

DIN CEN/TS 1519-2:2012 建筑结构中(低温和高温)渣土和废物排放用塑料管道系统.聚乙烯(PE).第2部分:合格评定指南

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 1519-2:2012

DIN CEN/TS 1451-2:2012 建筑物内渣土和废物倾倒用塑料管道系统(低温和高温).聚丙烯.第2部分:合格评定导则

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 1451-2:2012

ANSI/ASTM F628:2012 带泡沫芯的丙烯腈-丁二烯-苯乙烯(ABS)表40塑料排水管、污水管和通风管的规格

Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core

ANSI/ASTM F2390:2012 具有后工业循环含量的聚氯乙烯(PVC)塑料排水管、废弃物和通风孔(Dwv)管及配件的规格

Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (Dwv) Pipe and Fittings Having Post-Industrial Recycle Content

ANSI/ASTM F1499:2012 共挤复合排水,排污,排气管(DWV)规格

Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)

ANSI/AHRI 1271-2011 HVACR设备抗震鉴定要求

This standard describes the methods for equipment qualification and the process to determine equipment Seismic Capacity.

Requirements for Seismic Qualification of HVACR Equipment

ANSI/AHRI 1270-2011 HVACR设备抗震鉴定要求

This standard describes the methods for equipment qualification and the process to determine equipment Seismic Capacity.

Requirements for Seismic Qualification of HVACR Equipment

DIN EN 16000:2010 塑料管道系统.建筑物内系统.试验装置内只有单一燃烧物品产生热的组件的安装和固定.德文版本EN 16000-2010

This European Standard specifies the mounting and fixing of components in the test apparatus to thermal attack by a single burning item(SB) according to EN 13823.

Plastics piping systems - Systems within the building structure - Mounting and fixing of components in the test apparatus to thermal attack by a single burning item; German version EN 16000:2010

BS 5834-1:2009 公共事业用地面控制器,防护装置和地下室.第1部分:防护装置和基座的规范

This part of BS 5834 specifies requirements and test methods for vitrified clay and unreinforced concrete guards and plinths for use with utility apparatus and surface boxes conforming to BS 5834-2.

Surface boxes, guards and underground chambers for the purposes of utilities - Part 1:Specification for guards and plinths

NF T54-425:2009 塑料.建筑设备和工业安装用绝缘产品的热塑性导管架.测试方法和要求

Plastics - Thermoplastic jackets for insulation products for building equipment and industrial installations - Requirements and test methods.

BS EN ISO 13477:2008 流体输送用热塑性塑料管.耐裂纹快速扩展性(RCP)的测定.小型稳态试验(S4试验)

This International Standard specifies a small-scale (S4) test method for determining the arrest or propagation of a crack initiated in a thermoplastics pipe at a specified temperature and internal pressure. This International Standard is applicable to the assessment of the performance of thermoplastics pipes intended for the supply of gases or liquids. In the latter case, air can also be present in the pipe. NOTE This test method was developed using monolayer thermoplastics pipes. Its applicability to multi-layer/coated pipes has yet to be fully confirmed and is under study.

Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test)

UL FLAMMABLE& COMBUSTIBLE-2008 易燃和可燃液体和气体设备目录2008

This Directory contains the names of companies authorized to use the UL Mark on or in connection with products that have been investigated by UL and found to be in compliance with UL’s requirements. These companies, as well as the manufacturers and submitters of the products, have entered into an Agreement with UL to use the UL Mark only on or in connection with products manufactured in compliance with UL’s requirements. It should be noted that UL certified products of different makes or model designations are not necessarily equivalent in quality or performance. The appearance of catalog or model numbers or other specific product designations in this Directory signifies that: (1) representative samples of these products have been submitted to UL and found to comply with the applicable requirements, and that (2) the manufacturer has been authorized to use the appropriate UL Mark on production that continues to comply withUL’s requirements and is subject to UL’s Follow-Up Service. Since manufacturers are not obligated to apply the UL Mark on all of their production, products that do not bear the UL Mark are not required by UL to comply with UL’s requirements. Accordingly, the appearance of a company’s name or a specific product designation in this Directory does not in itself ensure that products so specified or identified are subject to UL’s Follow-Up Service. The manufacturer’s products are not subject to UL’s Follow-Up Service unless they bear the UL Mark. Only those products bearing the appropriate UL Mark and the company’s name, trade name, trademark or other authorized identification should be considered as being covered by UL’s Listing or Classification and Follow-Up Service. The UL Mark provides evidence of listing or labeling, which may be required by installation codes or standards.

FLAMMABLE AND COMBUSTIBLE LIQUIDS AND GASES EQUIPMENT DIRECTORY 2008

BS EN 15014:2007 塑料管道系统.压力下水和其它液体用地下埋设和地上铺设系统.管道、配件及其连接件的性能特点

This European Standard specifies performance requirements for plastics pipes, fittings and their joints for buried or above-ground pressure applications for water for general purposes, drainage, sewerage and irrigation, as well as for any other pressure application with other fluids covered by the Construction Products Directive with the exception of drinking water distribution for human consumption. It gives associated test methods for verification and evaluation of conformity with this European Standard. NOTE Compliance of pipes, fittings and their joints with this document does not confer a presumption of fitness of the product for the transport of water intended for human consumption within the meaning of the Directive 89/106/EEC. However, until the operation of the envisaged European Acceptance Scheme for construction products in contact with water intended for human consumption and the revision of this standard, products conforming to this standard could be used for the transport of water intended for human consumption if they conform to the relevant national, regional or local regulatory provisions or recommendations applicable in the place of use.

Plastics piping systems - Buried and above ground systems for water and other fluids under pressure - Performance characteristics for pipes, fittings and their joints

ISO/TR 10465-3:2007 基于非饱和聚酯树脂的柔性玻璃纤维增强管材(GRP-UP)的地下安装.第3部分:安装参数和应用限值

This part of ISO 10465 gives supplementary information on parameters and application limits for the underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP). It is particularly relevant when using an ATV-A 127 type design system. Explanations for the long-term safety factors incorporated into the GRP system standards based on simplified probabilistic methods are provided in Annex G.

Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) - Part 3: Installation parameters and application limits