Q83 供热器材设备 标准查询与下载
共找到 818 条与 供热器材设备 相关的标准，共 55 页
Cast iron heating radiator
- ICS
- 91.140
- CCS
- Q83
- 发布
- 2018-02-06
- 实施
- 2019-01-01 00:00:00.0
本标准规定了建筑采暖用钢制散热器配件的术语和定义、分类与标记、结构、要求、试验方法、检验规则以及合格证、包装和贮运。 本标准适用于符合GB/T 29039规定的钢制采暖散热器的片头、钢管、螺纹管口、丝堵、放气丝堵主要配件。
General technical specification for steel heating radiator accessories
- ICS
- 91.140.10
- CCS
- Q83
- 发布
- 2016-08-29
- 实施
- 2017-07-01
本标准规定了钢铝复合散热器（以下简称散热器）的术语和定义，规格与型号，材料与结构，要求，试验方法，检验规则，标志、使用说明书和合格证，包装、运输和贮存等。 本标准适用于工业与民用建筑中，以不高于95 ℃且水质符合GB/T 29044-2012中4.5规定的热水为热媒的散热器。
Steel-aluminum compound radiator
- ICS
- 91.140.10
- CCS
- Q83
- 发布
- 2015-05-15
- 实施
- 2016-02-01
Steel heating radiator
- ICS
- 91.140.10
- CCS
- Q83
- 发布
- 2012-12-31
- 实施
- 2013-11-01 00:00:00.0
本标准规定了钢制采暖散热器的分类与型号,要求,试验方法,检验规则,标志、使用说明书和合格证,包装、运输和贮存、本标准适用于工业与民用建筑中,以不高于95 ℃的热水或不高于0.3 MPa的饱和蒸汽为热媒的钢制采暖散热器(以下简称散热器)、
Steel heating radiator
- ICS
- 91.140.10
- CCS
- Q83
- 发布
- 2012-12-31
- 实施
- 2013-11-01
本标准规定了铸铁采暖散热器的术语和定义、分类、主参数与型号、要求、试验方法、检验规则、标志、运输与贮存。 本标准适用于工业、民用建筑中，热媒为130℃以下的热水或0.2MPa以下蒸汽的铸铁采暖散热器（以下简称散热器）。
Cast iron heating radiator
- ICS
- 91.140
- CCS
- Q83
- 发布
- 2005-10-26
- 实施
- 2006-05-01
Cast iron heating radiator
- ICS
- 91.140
- CCS
- Q83
- 发布
- 2005-10-26
- 实施
- 2006-05-01 00:00:00.0
Storage water heater enamel parts
- ICS
- 25.220.50;97.100.01
- CCS
- Q83
- 发布
- 2021-08-21
- 实施
- 2022-02-01
Thermal and environmental test methods for civil stoves
- ICS
- 97.100.30
- CCS
- Q83
- 发布
- 2019-07-23
- 实施
- 2019-08-23
Technical requirements for energy saving and environmental protection of civil stoves
- ICS
- 97.100.30
- CCS
- Q83
- 发布
- 2019-07-23
- 实施
- 2019-08-23
Gas hydronic heating appliances for domestic use
- ICS
- 91.140.65;97.100.20
- CCS
- Q83
- 发布
- 2019-04-22
- 实施
Aluminum column airfoil radiator
- ICS
- 91.140.10
- CCS
- Q83
- 发布
- 2018-05-30
- 实施
- 2018-12-01
本标准规定了钢制板型散热器(以下简称“散热器”)的分类与标记、材料与结构、要求、试验方法、检验规则、标志、使用说明书及合格证、包装、运输和贮存。 本标准适用于工业与民用建筑供暖系统，以温度不高于95 ℃且水质符合GB/T 29044-2012中4.5规定的热水为热媒的散热器。
Steel panel radiator
- ICS
- 91.140.10
- CCS
- Q83
- 发布
- 2018-05-30
- 实施
- 2018-12-01
Direct connecting and Flexible hose connecting type portable gas cookers with LPG cartridge
- ICS
- 97.040.20
- CCS
- Q83
- 发布
- 2017-08-21
- 实施
Portable gas space heaters with LPG cartridge
- ICS
- 97.100.20
- CCS
- Q83
- 发布
- 2017-08-21
- 实施
Specification for dedicated liquefied petroleum gas appliances - Parasol patio heaters - Flueless radiant heaters for outdoor or amply ventilated area use
- ICS
- 97.100.20
- CCS
- Q83
- 发布
- 2017-07-18
- 实施
- 2017-07-31
Gas-fired domestic appliances producing hot water - Part 4: Assessment of energy consumption of gas combined heat and power appliances (mCHP) producing hot water and electricity; German version EN 13203-4:2016
- ICS
- 91.140.65
- CCS
- Q83
- 发布
- 2017-07
- 实施
Oil burning water heaters for domestic use
- ICS
- 27.060.30;91.140.65;97.100.40
- CCS
- Q83
- 发布
- 2017-02-20
- 实施
This European Standard specifies test methods for validating the requirements for Factory Made Thermal Solar Heating Systems as specified in EN 12976-1. The standard also includes two test methods for thermal performance characterization by means of whole system testing.
Thermal solar systems and components - Factory made systems - Part 2: Test methods
- ICS
- 27.160
- CCS
- Q83
- 发布
- 2017-01
- 实施
This European Standard specifies requirements on durability, reliability and safety for Factory Made solar heating systems. The standard also includes provisions for evaluation of conformity to these requirements. Concept of system families is included, as well. The requirements in this standard apply to Factory Made solar systems as products. The installation of these systems including their integration with roofs or facades is not considered, but requirements are given for the documentation for the installer and the user to be delivered with the system. External auxiliary water heating devices that are placed in series with the Factory Made system are not considered to be part of the system. Cold water piping from the cold water grid to the system as well as piping from the system to an external auxiliary heater or to draw-off points is not considered to be part of the system. Piping between components of the Factory Made system is considered to be part of the system. Any integrated heat exchanger or piping for space heating option is not considered to be part of the system.
Thermal solar systems and components - Factory made systems - Part 1: General requirements
- ICS
- 27.160
- CCS
- Q83
- 发布
- 2017-01
- 实施
