Q87 园林动植物及其器械 标准查询与下载
共找到 172 条与 园林动植物及其器械 相关的标准，共 12 页
This part of IEC 62841 apples to hand-held hammers. Tools covered by this document include percussion hammers and rotary hammers, including rotoary hammers with the capacity to rotate only with the percussion system disengaged (drill only mode).
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers (IEC 62841-2-6:2020); German version EN IEC 62841-2-6:2020 + A11:2020
- ICS
- 25.140.20
- CCS
- Q87
- 发布
- 2021-11-01
- 实施
- 2021-11-01
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-3 : particular requirements for pedestrian controlled walk-behind lawnmowers
- ICS
- 13.120
- CCS
- Q87
- 发布
- 2021-08-06
- 实施
- 2021-10-15
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-3: Particular requirements for hand-held grinders, disc-type polishers and disc-type sanders; Corrigendum 1
- ICS
- 25.140.20
- CCS
- Q87
- 发布
- 2021-04-01
- 实施
This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to transportable table saws with a toothed single blade; or; stacked blades that cut a single groove or slot; or; a moulding head cutter intended for cutting wood and analogous materi
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws
- ICS
- 25.140.20
- CCS
- Q87
- 发布
- 2021-03-01
- 实施
Specifications for the design of public security traffic command system—Part 3:City public security traffic command system
- ICS
- CCS
- Q87
- 发布
- 2020-12-18
- 实施
- 2021-05-01
Gardening machinery. Powered material-collecting systems. Safety
- ICS
- 65.060.70
- CCS
- Q87
- 发布
- 2020-11-06
- 实施
- 2020-11-06
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-3: Particular requirements for pedestrian controlled walk-behind lawnmowers
- ICS
- 65.060.70
- CCS
- Q87
- 发布
- 2020-11-00
- 实施
Design specification for public security traffic command system Part 2: Provincial (autonomous region) public security traffic command system
- ICS
- 93.080.79
- CCS
- Q87
- 发布
- 2019-10-31
- 实施
- 2020-01-01
Design Specifications for Public Security Traffic Command System Part 1: General Rules
- ICS
- 93.080.79
- CCS
- Q87
- 发布
- 2019-10-31
- 实施
- 2020-01-01
Public security traffic command system design specification part 4: drawing
- ICS
- 93.080.79
- CCS
- Q87
- 发布
- 2019-10-31
- 实施
- 2020-01-01
This part of IEC 62841 applies to transportable mitre saws with a toothed blade and intended for cutting wood and analogous materials, plastics and nonferrous metals except magnesium with a saw blade diameter not exceeding 360 mm, which may simply be referred to as saw or tool.
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws (IEC 62841-3-9:2014, modified + COR1:2015 + COR2:2016); German version EN 62841-3-9:2015 +
- ICS
- 25.140.20;65.060.70;65.060.80
- CCS
- Q87
- 发布
- 2018-11-00
- 实施
- 2018-11-01
This standard applies to transportable diamond drills, intended to be connected to a liquid system. Liquid system may include liquid from a pipe or container.
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified + Cor.:2015); German version EN 62841
- ICS
- 25.140.20
- CCS
- Q87
- 发布
- 2018-09-01
- 实施
- 2018-09-01
This document specifies safety requirements and their verification for combustion-engine-powered ride-on (seated) rotary lawnmowers and cylinder lawnmowers and equipped with metallic cutting means and/or non-metallic cutting means. With amendment 2 requirements in 4.5.1 for cutting means enclosure guards have been added. Furthermore editorial changes in subclauses 4.6.2 and 7.1.2 were made.
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013 + Amd 1:2017, Corrected Version 2017-03 + Amd 2:2017); German version EN ISO 5395-3:2013 + A1:2017 + A2:2018
- ICS
- 65.060.70
- CCS
- Q87
- 发布
- 2018-09-00
- 实施
This standard applies to transportable cut-off machines intended to cut materials such as metals, concrete and masonry fitted with one abrasive bonded reinforced wheel of Type 41, or diamond cut-off wheel with the peripheral gaps, if any, not exceeding 10 mm and with a rated no-load speed not exceeding a peripheral speed of the wheel of 100 m/s with the maximum wheel diameter and a wheel diameter range of 250 mm to 410 mm.
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines (IEC 62841-3-10:2015, modified + COR1:2016); German version EN 62841-3-10:2015 + AC
- ICS
- 25.140.20
- CCS
- Q87
- 发布
- 2018-08-01
- 实施
- 2018-08-01
This part of ISO 5395 specifies terminology and common test methods used for verification of safety requirements for combustion engine powered rotary lawnmowers and cylinder lawnmowers including pedestrian-controlled (with or without sulky) and ride-on types, and equipped with metallic cutting means and/or non-metallic cutting means with one or more cutting elements pivotally mounted on a generally circular drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting element of 10 J or more.
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 1: Terminology and common tests (ISO 5395-1:2013 + Amd 1:2017); German version EN ISO 5395-1:2013 + A1:2018
- ICS
- 65.060.70
- CCS
- Q87
- 发布
- 2018-08-01
- 实施
- 2018-08-01
This International Standard deals with the safety of electric motor-operated or magnetically driven: - hand-held tools (part 2); - transportable tools (part 3); - lawn and garden machinery (part 4). This part 62841-3-4 applies to transportable bench grinders.
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders (IEC 62841-3-4:2016, modified + COR1:2016); German version EN 62841-3-4:2016 + AC:2017
- ICS
- 25.140.20
- CCS
- Q87
- 发布
- 2018-08-01
- 实施
- 2018-08-01
This standard applies to table saws with a toothed blade intended for cutting wood and analogous materials, plastics and nonferrous metals except magnesium with a saw blade diameter not exceeding 315 mm, which hereinafter may simply be referred to as saw or tool.
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified + COR1:2015); German version EN 62841-3-1:2014 + AC:2015 + A
- ICS
- 25.140.20
- CCS
- Q87
- 发布
- 2018-08-01
- 实施
- 2018-08-01
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws; Amendment 1
- ICS
- 25.140.20;25.140.30
- CCS
- Q87
- 发布
- 2018-01-01
- 实施
- 2018-01-23
This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to reciprocating saws such as jig saws and sabre saws.
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws
- ICS
- 25.140.20;25.140.30
- CCS
- Q87
- 发布
- 2018-01-01
- 实施
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator - Amendment 2: Cutting means enclosure guards
- ICS
- 65.060.70
- CCS
- Q87
- 发布
- 2017-11-01
- 实施
