R08 标志、包装、运输、贮存 标准查询与下载



共找到 101 条与 标志、包装、运输、贮存 相关的标准,共 7

本标准规定了货物流通过程中包装单元货物的最大底平面尺寸。 本标准适用于公路、铁路、水路和航空运输的单元货物。

Packaging-Unit load size

ICS
55.020
CCS
R08
发布
1994-09-28
实施
1995-04-01

Technical specifications for energy-storage self-luminous traffic signs

ICS
03.220.20
CCS
R08
发布
2021-05-06
实施
2021-06-06

Diese Internationale Norm legt ein Verfahren für die vertikale Schwingprüfung an (einem) versandfertigen Packstück(en) und Ladeeinheiten fest, unter Verwendung rauschförmiger Anregung. Des Weiteren stellt dieses Dokument Verfahren zur Überprüfung der Festigkeit eines Packstückes und seines Schutzvermögens unter vertikaler Schwinganregung auf. Die in diesem Dokument erläuterte Prüfung kann entweder als Einzelprüfung durchgeführt werden, um die Auswirkung vertikaler Schwingbelastung zu untersuchen, oder als Teil eines Prüfprogramms zur Ermittlung der Widerstandsfähigkeit einer Verpackung im Rahmen eines bestimmten Verteilungssystems (Transportkette), das eine Gefährdung durch Schwingung einschließt. ANMERKUNG In dieser Internationalen Norm wird ein Packstück oder eine Ladeeinheit als Prüfling bezeichnet.

Packaging - Complete@ filled transport packages and unit loads - Vertical random vibration test

ICS
55.180.40
CCS
R08
发布
2016-08
实施

This European Standard specifies the technical and functional properties of automatic recording equipment used to determine randomly appearing shocks during transportation. Such automatic recording equipment can be used to: - determine mechanical shock loads on individual transportations; - monitor the transportation means to observe the limits of the shock parameters; - determine the shock loads on the transported item. This standard defines the sensors to be attached to the device, and specifies the minimum requirements for the parameters to be adjusted. It also defines the minimum requirements for the data analysis, as well as the data presentation. This standard covers the complete recording equipment, including its accelerometers and the data analysis in an external data processing unit. The accelerometers can be integrated into the device or separately mounted from it (external sensors). This standard also applies to the routine monitoring of individual transportations

Transportation loads - Measurement and evaluation of dynamic-mechanical loads - Part 6: Automatic recording systems for measuring randomly occurring shock during monitoring of transports

ICS
55.180.01
CCS
R08
发布
2016-07
实施

Technical regulations for setting up energy-storage self-luminous traffic signs

ICS
03.220.20
CCS
R08
发布
2015-07-16
实施
2015-08-16

This European Standard specifies data protocols and data format for the interfaces between electronic equipment (TVE), on-board computer (OBC) of the tank vehicle and stationary equipment for all interconnecting communication paths. This European Standard specifies the basic protocol FTL used in the communication (basic protocol layer), the format and structure of FTL-data to be transmitted (data protocol layer) and describes the content of the FTL-data. This data protocol may be used for other application, e. g. between stationary tank equipment and offices.

Tanks for transport of dangerous goods - Digital interface for the data transfer between tank vehicle and with stationary facilities - Part 1: Protocol specification - Control, measurement and event data

ICS
35.240.60
CCS
R08
发布
2015-07-01
实施

Packaging -- Bar code and two-dimensional symbols for shipping, transport and receiving labels

ICS
35.040;55.020
CCS
R08
发布
2013-03-21
实施

This European Standard covers the vapour collection adaptor and coupler used to achieve a vapour tight path between the transport tank and the stationary loading and unloading facilities. This European Standard specifies the performance requirements and the critical dimensions of the vapour recovery adaptor fitted to the tank and the mating coupler fitted to a hose or to pipework connected to the stationary loading and unloading facilities. It also specifies the tests necessary to verify the compliance of the equipment with this standard. The equipment specified by this European Standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR which have a vapour pressure not exceeding 110 kPa, at 50 °C and petrol, and which have no sub-classification as toxic or corrosive.

Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler

ICS
13.300;23.020.20;23.040.60
CCS
R08
发布
2012-02
实施

These requirements cover floor proximity and other egress path marking and lighting systems that provide a visual delineation of the path of egress and are also used to identify significant egress path features such as doors, stair banisters, obstacles or information placards. These systems are intended for installation and use as required by codes such as the Life Safety Code, NFPA 101; the Building Construction and Safety Code, NFPA 5000, and the International Building Code.

Standard for Safety for Luminous Egress Path Marking Systems (Proposal dated February 12, 2010)

ICS
91.160.10
CCS
R08
发布
2010
实施

Intelligent transport systems - Navigation systems - Application programming interface (API)

ICS
CCS
R08
发布
2009-11
实施

本标准规定了水路、公路运输非危险货物包装的形式与货物检验,及其基本要求。 本标准适用于水路、公路运输非危险货物包装。

General requirements of packaging for transport cargo by water and road

ICS
03.220.20;03.220.40
CCS
R08
发布
2008-12-19
实施
2009-03-01

本规程适用于道路交通标线涂层湿膜厚度梳规(以下简称“梳规”)的首次检定、后续检定和使用中检验。

Comb Gauge for Wet-film Thickness of Road Traffic Marking Coat

ICS
CCS
R08
发布
2007-04-03
实施
2007-08-01

The intent of this research is to assist departments of transportation (DOTs) in identifying and pursuing opportunities for enhancing organizational performance. The research involved asking DOTs, via written surveys and site visits to selected agencies

A Transportation Executive抯 Guide to Organizational Improvement Revision 1

ICS
CCS
R08
发布
2007-02-01
实施

This method covers a procedure for the determination of the particle-size distribution of fine and coarse aggregates extracted from hot mix asphalt (HMA), using sieves with square openings.

Standard Method of Test for Mechanical Analysis of Extracted Aggregate

ICS
CCS
R08
发布
2007-01-01
实施

Drainage facilities, like all other elements of the highway system, deteriorate and decay due to the persistent forces of nature. Processes such as abrasion, corrosion, and erosion can lead to structural deficiencies and shorten the anticipated service

CULVERT INSPECTION, MATERIAL SELECTION, AND REHABILITATION GUIDELINE 4th edition

ICS
CCS
R08
发布
2007-01-01
实施

Bridges serve a variety of highway purposes including the elimination of conflicts with traffic and other modes of transportation, such as rail, marine, air, and pedestrian. Bridges enable watercourses to maintain the natural function of flow conveyance

HYDRAULIC ANALYSIS FOR THE LOCATION AND DESIGN OF BRIDGES 4th edition

ICS
CCS
R08
发布
2007-01-01
实施

The use of consultants by state transportation agencies varies considerably over time. Agencies are seeing increasing pressures to handle larger and more rapid changes in their programs while maintaining high levels of production efficiency and project

GUIDELINES FOR SELECTING AND UTILIZING HYDRAULICS ENGINEERING CONSULTANTS 4th edition

ICS
CCS
R08
发布
2007-01-01
实施

This specification covers the requirements and methods of test for corrugated polyethylene (PE) pipe, couplings and fittings for use in subsurface drainage systems, storm sewers, and in surface drainage (culverts), where soil support is given to the pi

Standard Specification for Corrugated Polyethylene Drainage Pipe

ICS
CCS
R08
发布
2007-01-01
实施

The function of a culvert is to convey surface water across or from the highway right-of-way. In addition to this hydraulic function, it must also carry construction and highway traffic and earth loads; therefore, culvert design involves both hydraulic

HYDRAULIC DESIGN OF CULVERTS 4th edition

ICS
CCS
R08
发布
2007-01-01
实施

This test method covers the determination of the effect on mortar strength of the organic impurities in fine aggregate, whose presence is indicated by tests with T 21. Comparison is made between compressive strengths of mortar made with washed and unwa

Standard Method of Test for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar

ICS
CCS
R08
发布
2007-01-01
实施



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号