R21 船舶驾驶与轮机管理 标准查询与下载

GB 18436-2022 轮机日志和车钟记录簿

本文件规定了轮机日志和车钟记录簿的记载内容、记载要求、保管要求、格式版面要求和印刷制作要求。 本文件适用于所有中国籍国际航行和500总吨或主机总功率750kW以上国内沿海航行的以内燃机或电动机作为主机的海船。 其他中国籍船舶可参照执行。

Engine log book and record book of engine order telegraph

GB 18436-2001 轮机日志和车钟记录簿

本标准规定了轮机日志和车钟记录簿记载，保管，制作、登记和签发，格式，页面设计以及印刷要求。 本标准适用于所有中国籍国际航行和500总吨以上沿海航行的柴油机动力装置的货船。其他中国籍船舶可参照执行。

Engine log book and record book of engine order telegraph

JT/T 1380.4-2021 海船船员培训模拟器训练要求 第4部分：电子海图显示与信息系统模拟器

Seagoing ship crew training simulator training requirements Part 4: Electronic chart display and information system simulator

JT/T 1380.5-2021 海船船员培训模拟器训练要求 第5部分：全球海上遇险与安全系统模拟器

Simulator training requirements for seagoing ship crew training Part 5: Global Maritime Distress and Safety System Simulator

JT/T 1379.2-2021 海船船员培训模拟器技术要求 第2部分：轮机模拟器

Technical requirements for seagoing ship crew training simulators Part 2: Engine simulators

JT/T 1380.3-2021 海船船员培训模拟器训练要求 第3部分：雷达模拟器

Simulator training requirements for seagoing ship crew training Part 3: Radar simulator

JT/T 1379.4-2021 海船船员培训模拟器技术要求 第4部分：电子海图显示与信息系统模拟器

Technical requirements for seagoing ship crew training simulators Part 4: Electronic chart display and information system simulators

JT/T 1379.1-2021 海船船员培训模拟器技术要求 第1部分：船舶操纵模拟器

Technical requirements for seagoing ship crew training simulators Part 1: Ship maneuvering simulators

JT/T 1379.3-2021 海船船员培训模拟器技术要求 第3部分：雷达模拟器

Technical requirements for seagoing ship crew training simulators Part 3: Radar simulators

JT/T 1380.1-2021 海船船员培训模拟器训练要求 第1部分：船舶操纵模拟器

Simulator training requirements for seagoing ship crew training Part 1: Ship maneuvering simulators

JT/T 1380.2-2021 海船船员培训模拟器训练要求 第2部分：轮机模拟器

Simulator training requirements for seagoing ship crew training Part 2: Marine simulators

JT/T 1379.5-2021 海船船员培训模拟器技术要求 第5部分：全球海上遇险与安全系统模拟器

Technical requirements for seagoing ship crew training simulators Part 5: Global maritime distress and safety system simulators

DIN 81208-19:2009 船舶的操纵 第19部分:平面运动试验

This standard is applicable together with DIN 81208-1 to determine the hydrodynamic forces and moments due to lateral and angular motions in one plane, i.e. the xy-plane for surface and submerged operation or the xz-plane for submerged operation.

Manoeuvring of ships - Part 19: Planar motion test

JT/T 300-2009 拖轮操作规程

本标准规定了港口拖轮作业的基本要求，单船、港口拖带和长途拖带作业等操作方法，以及台风季节作业和拖轮专用号灯、号型和信号的要求。 本标准适用于沿海、内河、港口的720kW~4781kW作业拖轮，720kW以下及4781W以上的拖轮作业亦可参照执行。

Operational process of tugboats

KS V ISO 16329:2004 船舶与海洋技术.高速船舶的航向控制系统

이 규격은 다음과 같은 조건에서 운항되는 고속정에 설치된 침로각 제어 장치의 구조, 성능,

Heading control systems for high-speed craft

ISO 16329:2003 船舶和海上技术.高速船舶的航向控制系统

This International Standard specifies the structure, performance, inspection and testing of heading control systems to be installed on board craft operating under the following conditions: a) speed exceeding 30 kn and up to 70 kn; b) maximum rate of turn 20°/s; c) normal range of operation between 70°N and 70°S should, as required by chapter 13 of the HSC Code, comply with the minimum performance requirements specified in these standards. This International Standard applies to the heading control systems which enable a craft to keep a preset heading with minimum operation of the craft's steering gear, within limits related to the craft's manoeuvrability in conjunction with their sources of heading information. This International Standard assumes the use of a conventional arrangement. Where other arrangements are provided, the requirements of this standard should apply insofar as they are applicable, and appropriate justification provided where deviation from the requirements is necessary. The heading control systems should, within a speed range of up to 30 knots, comply with resolution A.342(IX), and within a speed range of 30 knots to 70 knots should comply with the requirements of this resolution. NOTE 1 All requirements that are extracted from the recommendations of IMO Resolutions [Resolution A.822(19) on performance standards for automatic steering aids for high-speed craft, A.694(17) and A.342(IX)] are printed in italics. NOTE 2 The heading control system was previously called "automatic steering aids (automatic pilot)". NOTE 3 Resolution A.342(IX) represents Resolution A.342(IX) as amended by MSC.64(67), Annex 3.

Ships and marine technology - Heading control systems for high-speed craft

JT/T 368-1997 船舶管理

本标准规定了船舶管理的基本原则、要求和方法。 本标准适用于海洋运输船舶的管理，其他船舶参照执行。

The ship management

JT/T 222-1996 内河船快速性及操纵性测试 经纬仪测试法

本标准规定了用经纬仪测试船舶(队)快速性及回转、制动试验的技术要求、环境条件、测试方法及数据处理。 本标准适用于设计航速低于30km/h的内河船舶(队)快速性及回转、制动试验。沿海中小型船舶可参照使用。

The Theodolite Measuring Method of Speed and Maneuverability of Inland Navigation Vessels

STAS 12777-1989 工业许可限度内的超声波保护

Prezentul standard stabile?te limitele admisibile ale nivelului de presiune acustic? al ultrasunetelor transmise pe cale aerian?, produse de instala?iile industriale (de exemplu insta-la?ii de sudur? cu ultrasunete, b?i de sp?lare cu ultrasunete, instala?

Ultrasonics protection in industry. Permissible limits