S20 铁路施工机械制造工艺与设备 标准查询与下载



共找到 12 条与 铁路施工机械制造工艺与设备 相关的标准,共 1

This European Standard establishes an evaluation procedure for determining equivalent conicity. A benchmark calculation is specified to achieve comparable results on a consistent basis for the equivalent conicity, which may be calculated by different methods not given in this European Standard. This European Standard also proposes possible calcualtion methods. Informative examples of the use of the Klingel formula (see Annex B) and linear regression of the Δr-function (see Annex C) are included in this European Standard.

Railway applications - Method for determining the equivalent conicity; German version EN 15302:2008+A1:2010

ICS
17.040.20;45.060.01
CCS
S20
发布
2011-01
实施

This European Standard establishes an evaluation procedure for determining equivalent conicity. A benchmark calculation is specified to achieve comparable results on a consistent basis for the equivalent conicity, which may be calculated by different methods not given in this European Standard. This European Standard also proposes possible calculation methods. Informative examples of the use of the Klingel formula (see Annex B) and linear regression of the At-function (see Annex C) are included in this European Standard. This European Standard includes reference profiles, profile combinations, tolerances and reference results with tolerance limits, which allow the user to assess the acceptability of a measuring and calculation system including random- and grid- errors of the measuring system. It sets down the principles of calculation that need to be followed but does not impose any particular numerical calculation method. This European Standard does not define limits for the equivalent conicity and gives no tolerances for the ra profile and the wheel profile to achieve acceptable results for the conicity. For purposes outside the scope of this European Standard (e.g. simulation of vehicle behaviour) it can be useful or necessary to use more sophisticated theories. These methods are not within the scope of this European Standard. For the application of this European Standard some general recommendations are given in Annex

Railway applications - Method for determining the equivalent conicity; English version of DIN EN 15302:2009-07

ICS
17.040.20;45.060.01
CCS
S20
发布
2009-07
实施

本规程适用于车辆段修量具的首次检定、后续检定和使用中检验。

Measuring Tools for Rolling Stock Repair at Depot

ICS
45.120
CCS
S20
发布
2008-10-14
实施
2009-03-01

本标准规定了D型承载鞍导框底面样板(以下简称样板)的璧式、尺寸及要求。适用于新制D型承载鞍导框底面样板的设计、制造和使用。

ICS
CCS
S20
发布
1998-02-24
实施
1998-09-01

本标准规定了D型承载鞍导框样板(以下简称样板)的型式、尺寸及要求。适用于新制D型承载鞍导框样板的设计、制造和使用。

ICS
CCS
S20
发布
1998-02-24
实施
1998-09-01

本标准规定了D型承续鞍弦高量具(以下简称量具)的形式、尺寸及要求。适用于新制D型承载鞍弦高量具的设计、制造和使用。

ICS
CCS
S20
发布
1998-02-24
实施
1998-09-01

本标准规定了D型承载鞍顶厚测量尺(以下简称测量尺)的互式、尺寸及要求。适用于断制D型承载鞍顶厚测量尺的设计、制造和使用。

ICS
CCS
S20
发布
1998-02-24
实施
1998-09-01

本标准规定了D型承载鞍对称度量具(以下简称量具)的型式、尺寸及要求。适用于折制D型承载鞍对称度盘具的设计、制造和使用。

ICS
CCS
S20
发布
1998-02-24
实施
1998-09-01

本标准规定了D型承载鞍推力挡肩样板(以下简称样板〕的型式、尺寸及要求。适用于新制D型承载鞍推力挡肩样板的设计、制造和使用。

ICS
CCS
S20
发布
1998-02-24
实施
1998-09-01

本标准规定了D型承截鞍鞍面宽度样板(以下简称样板)的型式、尺寸及要求。适用于新制D型承载鞍鞍面宽度样板的设计、制造和使用。

ICS
CCS
S20
发布
1998-02-24
实施
1998-09-01

Railway track construction and maintenance plant. Tamping and levelling machines with continuous progress. Specifications.

ICS
45.120
CCS
S20
发布
1992-03-01
实施
1992-03-05

ICS
CCS
S20
发布
1985-11-01
实施
1986-06-01



Copyright ©2007-2016 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号