T37 点火装置 标准查询与下载



共找到 193 条与 点火装置 相关的标准,共 13

Road vehicles—Spark-plugs—Test methods and requirements

ICS
43.060.50
CCS
T37
发布
2017-10-14
实施
2018-05-01 00:00:00.0

Road vehicles—Spark-plugs for gas engines—Test methods and requirements

ICS
43.060.50
CCS
T37
发布
2017-10-14
实施
2018-07-01 00:00:00.0

本标准规定了火花塞的主要特征及尺寸,包括了接线端子和气缸盖安装孔的尺寸。 本标准适用于道路车辆的电火花点火发动机用火花塞。

Road vehicles.Spark-plugs and their cylinder head housing.Basic characteristics and dimensions

ICS
43.060.30
CCS
T37
发布
2012-12-31
实施
2013-07-01

本标准规定了道路车辆应急起动电缆(以下简称起动电缆)的术语和定义、要求、试验方法、检验规则等。 本标准适用于标称电压为12V或24V、起动电流不超过750A的起动电缆。

Road vehicles jump-start cables

ICS
43.040.10
CCS
T37
发布
2012-06-29
实施
2012-11-01

本标准规定了以蓄电池供电、火花塞点火的内燃机点火系统的试验方法和条件。 在空气中通过火花间隙进行测量难以保证测量的重复性,给出了两种计算系统输出能量的方法。 方法A:利用火花间隙测试能量(试验装置A)。通过此方法获得的输出能量称为火花能量E。 方法B:利用齐纳二极管组测试能量(试验装置B)。通过此方法获得的输出能量称为齐纳放电能量E。方法B宜用于点火线圈和电流断电系统的对比试验,不适用于交变火花电流系统。 本标准适用于M、N、L类机动车点火系统。

Road vehicles-Ignition systems-Electrical performance and function test methods

ICS
43.040.10
CCS
T37
发布
2011-06-16
实施
2011-12-01

本标准规定了标称电压为12V的牵引车(轿车或轻型商用车)和挂车之间7芯12S型电连接器的尺寸、特性要求、接点分布等。12S连接器在准备用于超过7芯要求情况下和GB/T 5053.2的12N连接器一起使用。 本标准适用于牵引车和挂车之间7芯12S型电连接器。

Road vehicles.Connectors for the electrical connection of towing and towed vehicles.7-pole connector type 12S (supplementary) for vehicles with 12 V nominal supply voltage

ICS
43.040.10
CCS
T37
发布
2010-09-02
实施
2011-02-01

本标准规定了标称电压为24 V的牵引车及挂车之间7 芯24S型电连接器的尺寸,特性要求、接点分布等。 24S连接器在准备用于超过7 芯要求情況下和GB/T5053.1 的24N连接器一起使用。 本标准适用于牵引车及挂车之间7 芯24S型电连接器。 注:准备用于超过7 芯要求情况下,可以选择使用15 芯电连接器替代本标准与5053.1 规定的7 芯電連接器的组合。

Road vehicles.Connectors for the electrical connection of towing and towed vehicles.7-pole connector type 24S (supplementary) for vehicles with 24 V nominal supply voltage

ICS
43.040.10
CCS
T37
发布
2010-09-02
实施
2011-02-01

本标准规定了牵引车和挂车之间12V标称电压的13芯连接器的尺寸、接点分布、试验和性能要求,还规定了当连接器断开时,用于接收和存储插头的存放插座。

Road vehicles Connectors for the electrical connection of towing and towed vehicles 13 pole connector for vehicles with 12V nominal supply voltage

ICS
43.040.10
CCS
T37
发布
2006-12-19
实施
2007-08-01

本部分规定了标称电压为24V的牵引车和挂车之间制动系统和行走系的电连接器的尺寸特性、接点分布、试验和要求。还规定了当连接器断开时用于接受和储存插头的存放插座。

Road vehicles Connectors for the electrical connection of towing and towed vehicles Part 1: Connectors for braking systems and running gears of vehicles with 24V nominal supply voltage

ICS
43.040.10
CCS
T37
发布
2006-12-19
实施
2007-08-01

本部分规定了标称电压为12V的牵引车和挂车之间制动系统和行走系的电连接器的尺寸特性、接点分布、试验和要求。还规定了当连接器断开时用于接受和储存插头的存放插座。

Road vehicles Connectors for the electrical connection of towing and towed vehicles Part 2: Connectors for braking systems and running gears of vehicles with 12V nominal supply voltage

ICS
43.040.10
CCS
T37
发布
2006-12-19
实施
2007-08-01

本标准规定了15芯电连接器的尺寸、接点分布、试验及要求,该连接器用于标称电压为24V的牵引车及其挂车之间除制动系统和行驶系外的其他设备的电气连接,还进一步规定了当连接器断开时用于接收和存储插头的存放插座以及7芯和15芯连接器之间的转换装置。

Road vehicles Connectors for the electrical connection of towing and towed vehicles 15-pole connector for vehicles with 24V nominal supply voltage

ICS
43.040.10
CCS
T37
发布
2006-12-19
实施
2007-08-01

本标准规定了火花塞的整体式连接端子的螺杆式接线端子的尺寸。 本标准适用于内燃机电点火系统用火花塞。

Spark-plugs-Terminals

ICS
43.060.50
CCS
T37
发布
2006-12-09
实施
2007-05-01

本标准规定了供电火花点火发动机用的标准旋合长度或长旋合长度的M12×1.25平座火花塞及其气缸盖安装孔的主要尺寸规格。

M12×1.25spark-plugs with flat seating and their cylinder head housing

ICS
43.060.50
CCS
T37
发布
1999-11-01
实施
2000-08-01

本标准规定了供电火花点火发动机使用的M10×1平座火花塞及其气缸盖安装孔的主要尺寸规格。

M10×1spark-plugs with flat seating and their cylinder head housing

ICS
43.060.50
CCS
T37
发布
1999-11-01
实施
2000-08-01

本标准规定了供电火花点火发动机用的标准旋合长度或长旋合长度的M14×1.25锥座火花塞及其气缸盖安装孔的主要尺寸规格。

M14×1.25 spark-plugs with conical seating and their cylinder head housing

ICS
43.060.50
CCS
T37
发布
1999-11-01
实施
2000-08-01

本标准规定了公路车辆用高压点火电线产品分类、通用技术要求、试验方法和标志包装。 本标准适用于以汽车为代表的公路车辆发动机点火系统用的无屏蔽高压点火电线。 各种型号电线的技术要求,规定在GB/T14820.2和GB/T14820.3中。

High tension ignition wires for road vehicle.Part 1.General

ICS
43.060.50
CCS
T37
发布
1993-12-30
实施
1994-10-01

本标准规定了铜芯高压点火电线产品品种,技术要求和检验规则。 本标准适用于以汽车为代表的公路车辆发动机点火系统用的无屏蔽铜芯高压点火电线。 电线除应符合本标准的规定要求外,还应符合GB/T14820.1的要求。

High tension ignition wires for road vehicle.Part 2.Copper conductor high tension ignition wires

ICS
43.060.50
CCS
T37
发布
1993-12-30
实施
1994-10-01

本标准规定了阻尼芯高压点火电线产品品种、技术要求和检验规则。 本标准适用于以汽车为代表的公路车辆发动机点火系统用的无屏蔽阻尼高压点火电线。 电线除应符合本标准的规定要求外,还应符合GB/T 14820.1的要求。

High tension ignition wires for road vehicle.Part 3.Damping conductor high tension ignition wires

ICS
43.060.50
CCS
T37
发布
1993-12-30
实施
1994-10-01

本标准适用于内燃机电火花点火系统用非屏蔽型火花塞。 本标准不适用于航空及特种发动机用火花塞。

Spark plugs

ICS
43.060.50
CCS
T37
发布
1987-06-03
实施
1988-01-01

本标准适用于电火花点火发动机用M14×1.25矮型平座火花塞及其气缸盖安装孔的主要尺寸规格。

Compact spark plug M14*1.25 with flat seating and cylinder head housing

ICS
43.060.50
CCS
T37
发布
1986-08-28
实施
1987-07-01



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号