共找到 50 条与 挂车综合 相关的标准,共 4 页
本文件规定了半挂车的技术要求、试验方法、检验规则、标识与贮存。 本文件适用于在道路上行驶的半挂车,其他半挂车参照使用。
General technical requirements for semi-trailer
GB/T39037 的本部分规定了半挂车的系固点、标记、标识与标牌要求,以及支撑架和辅助安全要求。本部分适用于海上滚装船运输的半挂车。
Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships—General requirements—Part 2: Semi-trailers
General technical requirements for centre-axle trailer
Specification for swap trailer transport of road vehicles
Freight trailer series pedigree
本标准规定了使用中的机械连接件的磨损极限尺寸和最大允许磨损量,以保证安装该连接件的重型车辆的行驶安全。 本标准适用于下列标准的机械连接件: --40 mm和50 mm牵引连接件(ISO 3584:2001); --40 mm和50 mm牵引杆孔(ISO 8755:2001和GB/T 4781-2006); --50号和90号牵引座牵引销(GB/T 4606-2006和GB/T 4607-2006); --连接钩和环形孔(ECE R55,修订版1:2001)。
Road vehicles.Drawbar couplings, drawbar eyes, fifth wheel kingpins, hook couplings and toroidal eyes.Wear limits for in-use mechanical couplings
本标准规定了机械传动的挂车支承装置(以下称支承装置)的型式与基本参数.技术要求、试验方法和檢驗規則。 本标准适用于在挂车上安装使用的支承装置。
Semitrailer landing gears
本标准规定了牵引车牵引装置和与之配套的40mm和50mm牵引杆挂环强度试验的条件和要求。
Road vehicles.Drawbar couplings and eyes for hinged drawbars.Strength tests
本标准规定了半挂车的技术要求、试验及生产一致性检查规则。 本标准适用于在道路上使用的半挂车。
General technical requirements for semitrailer
本标准规定了货运挂车的系列构成、长度限值、车轴数量及最大允许总质量等参数。本标准适用于在道路上使用的货运挂车。
Freight trailer series pedigree
本标准适用于在公路及城市道路上使用的货运挂车。在矿山、林区、港口、工地等场所使用的货运挂车可参照执行。
Freight trailer series pedigree
本文件适用于货运半挂车、中置轴挂车和牵引杆挂车制造行业质量评定和生产企业产品质量控制,半挂牵引拖台和其他挂车产品的质量控制参照使用。
Freight trailer product quality inspection and assessment methods
Technical requirements for piggyback transport road transport vehicles
Dieses Dokument legt Anforderungen, Prüfverfahren sowie Werkstoffleistungsmerkmale für Vorzelte für Fahrzeuge fest. Es gilt für Vorzelte, die für den Auf- und Abbau vorgesehen sind. Dieses Dokument gilt nicht für: a) Sonnendächer: eine vom Fahrzeug abnehmbare Konstruktion, die als Sonnenschutz benutzt wird, aber nicht als Wind-, Regen- oder Schneeschutz ausgelegt oder gebaut ist; ANMERKUNG 1 Ein Sonnendach kann mit zusätzlichen Vorder- und Seitenwänden verwendet werden, um eine Einfassung zu bilden, aber diese Einfassung würde nicht die Anforderungen an ein Vorzelt nach der Definition in diesem Dokument erfüllen. b) Markisen: eine am Fahrzeug dauerhaft angebrachte Konstruktion, die als Sonnenschutz benutzt wird, aber nicht als Wind-, Regen- oder Schneeschutz ausgelegt oder gebaut ist; ANMERKUNG 2 Markisen können mit zusätzlichen Vorder- und Seitenwänden verwendet werden, um eine Abdeckung zu bilden, aber diese Abdeckung würde nicht die Anforderungen an ein Vorzelt nach der Definition in diesem Dokument erfüllen. c) Dauerstandzelte: dauerhaftes Vorzelt, das nicht zur mobilen Anwendung vorgesehen ist. BEISPIEL Vorzelte, die mit quadratischen Aluminiumrahmen oder Holzbauten ausgestattet sind und den Einbau von Wohnräumen mit Fenstern und Türen ermöglichen.
Awnings for leisure accommodation vehicles - Requirements and test methods
本标准规定了营运半挂车在无牵引状态下安全性能要求与检测方法。本标准适用于营运半挂车安全性能检测。
Safety detecting requirements and methods for commercial semi-trailer
JT/T 886的本部分规定了道路甩挂运输半挂牵引车的基本要求、匹配尺寸、操控配置与环境、行车安全以及其他相关要求。本部分适用于道路甩挂运输半挂牵引车的生产与使用管理。
Technical requirements for swap trailer transport of road vehicles.Part 1:Semi-trailer towing vehicle
JT/T 886的本部分规定了道路甩挂运输半挂车的基本要求、配置要求、匹配尺寸要求以及结构与主要参数。本部分适用于道路甩挂运输半挂车的生产与使用管理。
Technical requirements for swap trailer transport of road vehicles.Part 2:Semi-trailer
The scope of this SAE Recommended Practice, trailer axle alignment, is to identify the dimensional limits of, and a method to, establish a perpendicular relationship between the king pin centerline and the axle centerline at its midpoint. Various types of equipment are commercially available which can be used for this measurement which provides varying degrees of accuracy, but none can be endorsed by SAE. The most fundamental methods of measurement will be described here, but other equipment is available if a greater degree of accuracy is desired.
Trailer Axle Alignment
1.1 This specification covers the general requirements for the Type III Cargo Bed Cover (CBC). The Type III CBC is a removable general purpose rigid wall enclosure that is mounted on any of the following model 2.5 ton cargo trucks (1) the M35A2 Lightweight Medium Tactical Vehicle (LMTV) and (2) the M1078 LMTV . It can also be mounted on the M1082 LMTV Trailer. The CBC provides environmental protection and security for mission equipment and items of general transport. 1.2 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 The following safety hazards caveat pertains only to the test required portion, Section 4, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.
Standard Specification for Cargo Bed Cover, Type III (M35A2, 2 1/2 Ton Cargo Truck/M1078, 2 1/2 Ton Lightweight Medium Tactical Vehicle (LMTV)/ M1082, 2 1/2 Ton LMTV Trailer)
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号