T71 挂车 标准查询与下载
共找到 53 条与 挂车 相关的标准，共 4 页
Technical requirements for freight draw-bar trailers
- ICS
- 43.080.10
- CCS
- T71
- 发布
- 2019-05-10
- 实施
- 2019-12-01 00:00:00.0
本标准规定了牵引座的型号、技术要求、试验方法、检验规则、标志、运输和贮存以及产品随行文件。 本标准适用于分别与GB/T 4606、GB/T 4607规定的牵引销相连接的50号和90号牵引座。
Road vehicles.General technical requirements for fifth wheel
- ICS
- 43.080.10
- CCS
- T71
- 发布
- 2015-09-11
- 实施
- 2015-12-01
本标准规定了货运挂车〈以下简称挂车〉主要结构和技术特性参数的测定方法、半挂车牵引座连接区域强度和支承装置连接强度试验方法，以及挂车制动性能和可靠性的试验方法。 本标准适用于任公路及城市道路上行驶的挂车试验”
Road vehicles.Trailer test procedure
- ICS
- 43.080.10
- CCS
- T71
- 发布
- 2015-09-11
- 实施
- 2015-12-01
本标准规定了货运挂车(以下简称挂车)主要结构参数和技术特性参数的测定方法以及制动性能的试验方法。 本标准适用于在公路及城市道路上行驶的货运挂车的试验。
Road vehicles.Trailer test procedure
- ICS
- 43.080.10
- CCS
- T71
- 发布
- 2009-03-23
- 实施
- 2010-01-01
本标准规定了农用挂车试验条件和试验方法。 本标准适用于农用挂车与拖拉机配套（以下简称车组）的性能试验和农用挂车（以下简称挂车）的可靠性试验。
Test methods for agricultural trailer
- ICS
- 65.060.10
- CCS
- T71
- 发布
- 2003-11-28
- 实施
- 2004-06-01
本标准规定了农用挂车的型式、基本参数、技术条件、安全要求、验收规则、标志和包装。本标准适用于手扶拖拉机和轮式拖拉机牵引的0．5 t～9 t农用挂车(以下简称挂车)。
Agricultural Trailer
- ICS
- 65.060.10
- CCS
- T71
- 发布
- 2003-10-29
- 实施
- 2004-05-01
本标准规定了货运挂车产品质量检查的试验规程，它包含了：货运挂车定型试验的实施条件、试验程序、试验内容及方法，试验报告的编写内容，货运挂车产品质量生产一致性检查的抽样规则、判定原则、试验内容及方法。 本标准适用于在公路和城市道路上行驶的货运挂车的定型试验和产品质量生产一致性检查试验。
Test-rules of products quality inspection for trailers
- ICS
- 43.080.10
- CCS
- T71
- 发布
- 2002-08-29
- 实施
- 2003-01-01
本标准规定了货运全挂车的技术要求、检验规则及试验方法。 本标准适用于在公路及城市道路上行驶的货运全挂车。
Technical requirements for freight full trailers
- ICS
- 43.080.10
- CCS
- T71
- 发布
- 1998-03-20
- 实施
- 1998-10-01
本标准规定了货运挂车主要结构参数和技术特性参数的测定方法，行车制动、驻车制动、制动传动系统的动作时间、制动传动系统的密封性和可靠性的试验方法。 本标准适用于在公路及城市道路上使用的货运挂车的定型试验和产品质量定期检查试验。
Trailer.Test procedure
- ICS
- 43.020
- CCS
- T71
- 发布
- 1992-11-17
- 实施
- 1993-07-01
本标准适用于货物运输的厢式挂车的设计与生产。
Technical conditions of van trailer
- ICS
- 43.080.10
- CCS
- T71
- 发布
- 2022-01-13
- 实施
- 2022-04-13
Powder material transportation semi-trailer
- ICS
- 43.080.10
- CCS
- T71
- 发布
- 2020-07-31
- 实施
- 2020-11-01
Drop and pull transport station car train configuration technical requirements part 2: semi-trailer
- ICS
- 43.080.10
- CCS
- T71
- 发布
- 2014-01-23
- 实施
- 2014-02-23
Road vehicles - Steadiness of vehicles with tiltable constructional systems - Air-suspended semitrailer with rear-dump truck cavity built-up
- ICS
- 43.080.10
- CCS
- T71
- 发布
- 2011-12-01
- 实施
- 2011-12-01
1.1 This specification covers the general performance requirements for the Type II Cargo Bed Cover (CBC). The Type II Cargo Bed Cover is a removable general purpose rigid wall enclosure that is mounted on the M105A2 Trailer, Cargo: 1.5 Ton, 2 Wheel. The Type II CBC provides environmental protection and security for mission equipment and items of general transport. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parenthesis are for information only. 1.3 The following safety hazards caveat pertains only to the test required portion, Section 4, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.
Standard Performance Specification for Cargo Bed Cover (CBC) M105A2 Trailer, Type II
- ICS
- 55.180.99 (Other standards related to freight dist
- CCS
- T71
- 发布
- 2011
- 实施
Road vehicles - Passenger-car and trailer combinations - Lateral stability test
- ICS
- 43.100
- CCS
- T71
- 发布
- 2010-08-31
- 实施
- 2010-08-31
This Standard covers fire and life safety criteria for recreational park trailers considered necessary to provide a reasonable level of protection from loss of life from fire and explosion. It reflects situations and the state of the art prevalent at the time the Standard was issued. This Standard is not intended as a design specification or an instruction manual. Much of the material in this Standard has been taken from, or is based on, nationally recognized standards for fire and life safety.
ANSI Recreational Park Trailer Standard 2009 Edition
- ICS
- 97.200.30
- CCS
- T71
- 发布
- 2009
- 实施
The purpose of this Recommended Practice is to identify and define the significant factors required for assembly process control.The proper assembly of wheels on trailers is of critical importance to consumer safety. The improper attachment of a wheel to an axle may lead to the loss of the wheel in service. This loss can lead to highway safety risks from flying debris or the loss of control of the trailer and/or towing vehicle. The careful design of the wheel assembly process and systematic control of that process will improve trailer reliability and enhance consumer safety.
Recommended Practice Process Controls for Assembly of Wheels on Trailers
- ICS
- 03.120.20;43.080.10
- CCS
- T71
- 发布
- 2008
- 实施
