T74 制动系统 标准查询与下载

GB/T 13881-2019 道路车辆 牵引车与挂车之间气制动管连接器

本标准规定了牵引车与挂车之间气制动管连接器的型式及互换性尺寸、性能要求、试验方法、安装使用及标识。 本标准适用于汽车列车装备双管路气压制动系统用气制动管连接器。 其中一条为供能管路、另一条为控制管路。

Road vehicles—Pneumatic braking connections between towing vehicles and trailers

GB/T 13881-1992 牵引车与挂车之间气制动管连接器

本标准规定了牵引车与挂车之间气制动管连接器的互换性尺寸、安装及标志。 本标准适用于汽车列车装备双管路气压制动系用气制动管连接器。其中一条为供能管路、另一条为控制管路。其他车辆列车亦可参照执行。

Pneumatic braking connections between motor vehicles and towed vehicles

BS ISO 7975:2006 乘用车.转向时制动.开环试验法

Passenger cars - Braking in a turn - Open-loop test method

JIS B 9208 AMD 1:2007 耕耘机用拖车.带制动器的传动轮轴(修改件1)

JIS B 9208:1994を，次のように改正する。1.(適用範囲)の備考1.の“J1S B 0401寸法公差及びはめあい”を，“JIS B 0401-1寸法公差及びはめあいの方式—第I部:公差，寸法差及びはめあいの基礎”に置き換える。

Trailer for power tiller -- Axles with brakes (Amendment 1)

KS R ISO 7375-2:2005 道路车辆.牵引车和挂车之间气压制动连接用蛇形管组件.第2部分:性能要求

이 규격은 열가소성 튜빙으로 제작하여 적당한 접속부(end fitting)를 조립한 코일형

Road vehicles-Coiled tube assemblies for air brake connection between towing and towed vehicles-Part 2:Performance requirements

KS R ISO 7375-1:2005 道路车辆.牵引车和挂车之间气压制动连接用蛇形管组件.第1部分:尺寸

KS R ISO 7375 시리즈는 코일형 튜브 어셈블리의 특수한 반응 시간과 브레이크 장치

Road vehicles-Coiled pipe assemblies for pneumatic brakingconnection between motor vehicles and towed vehicles-Part 1:Dimensions

KS R ISO 7311:2003 柴油机.垂直法兰盘旋转式燃油滤清器顶盖.装配和连接尺寸

이 규격은 디젤(압축 착화) 기관용 수직 플랜지형 연료 필터 헤드에 대한 장착과 연결 치수

Diesel engines－Heads for fuel filters with vertical flange－Mounting and connecting dimensions

KS R ISO 7310:2003 柴油机.水平法兰盘旋转式燃油滤清器顶盖.装配和连接尺寸

이 규격은 디젤(압축 착화) 기관용 스핀온 연료 필터를 위한 헤드에 대한 장착과 연결 치수

Diesel engines－Heads for spin－on fuel filters with horizontal flange－Mounting and connecting dimensions

KS R ISO 7026:2003 柴油机.S规格B类针式喷嘴的20、21、21.1和27型螺旋拧入式喷嘴架

이 규격은 압축 착화 기관에 사용하는 분사 노즐 홀더의 부착 치수에 대하여 규정한다.

Diesel engines－Screw-in injection nozzle holders, types 20, 21, 21.1and 27 for pintle nozzle size “S”, type “B”

JT/T 487-2003 货运挂车气压制动技术要求和试验方法

本标准规定了货运挂车气压制动系统的技术要求、性能要求和试验方法。 本标准适用于装有气压制动系统的、在公路及城市道路上行驶的货运挂车。

Specifications and test method for freight trailer air braking system

KS B ISO 5692-2:2002 农用车辆.拖挂车辆的机械连接装置.第2部分:带40mm座孔的连接环

이 규격은 ISO 6489-2의 드로바와 연결되고, 필요한 회전각만큼 수평 및 수직으로 회

Agricultural vehicles－Mechanical connections on towed vehicles－Part 2：Coupling ring 40 with socket

KS B ISO 5696:2001 牵引式农业车辆.制动和制动装置.实验室试验方法

이 규격은 농업용 피견인 차량의 브레이크 및 그 제어 장치의 적합성을 결정하기 위한 시험대

Trailed agricultural vehicles-Brakes and braking devices-Laboratory test method

ISO 7375-2:1998 道路车辆 牵引车和挂车之间气压制动连接用蛇形管组件 第2部分:性能要求

This part of ISO 7375 specifies the minimum requirements for coiled tube assemblies manufactured from thermoplastic tubing and with suitable end fittings. It applies to coiled tube assemblies for vehicle combinations equipped with air brake systems. This part of ISO 7375 does not apply to other thermoplastic tubing used in brake systems. The coiled tube assemblies covered by this part of ISO 7375 belongs to two possible categories: — tube assemblies for use up to a maximum working pressure of 1 000 kPa; — tube assemblies for use up to a maximum working pressure of 1 250 kPa; and within a temperature range between - 40 ℃ and + 100 ℃. note: 1) 1 kPa = 10 bar. 2) Consideration of a reduction of the lower temperature limit will be subiect of future revision of this part of ISO 7375.

Road vehicles - Coiled tube assemblies for air brake connection between towing and towed vehicles - Part 2: Performance requirements

JIS B 9208:1994 耕耘机用挂车.制动器轮轴

この規格は，歩行形トラクタに用いるトレーラ()のブレーキ付き車軸（以下，ブレーキ付き車軸という。）について規定する。

Trailer for power tiller -- Axles with brakes

NF R42-602:1988 道路车辆.用惰性制动控制的旅行挂车和轻型挂车.力的计算

Road vehicles. Caravans and light trailers. Control device for inertia braking. Calculation of forces.

ISO 7375-1:1986 道路车辆 牵引车和挂车之间气压制动连接用蛇形管组件 第1部分:尺寸

Specifies the minimum conditions to ensure braking compatibility and in particular response time for coiled pipe assemblies. Applies to coiled pipe assemblies for vehicle combinations equipped with pneumatic braking systems. Does not apply to other thermo-plastics tubing used in such braking systems. This second edition cancels and replaces the first edition (1982).

Road vehicles; Coiled pipe assemblies for pneumatic braking connection between motor vehicles and towed vehicles; Part 1 : Dimensions

JIS D 6705:1984 农用轮式拖拉机拉杆式牵引杆的尺寸

この規格は，主として農業用車輪トラクタに使用するリンタ形ドローバー(以下，ドローバーという。)の主要寸法について規定する。

Dimensions of link type drawbars for agricultural wheeled tractors

ISO 5696:1984 牵引式农业车辆 制动器和制动装置 实验室试验方法

Specifies a method of bench brakes their control devices in order to dertermine their suitability for use on trailed vehicles. Applies to assisted mechanical braking devices, using either compressed air or hydraulic fluid under pressure, for mounting on trailed vehicles. Annex A contains an example of a test report on axle brakes; annex B contains an example of a test report on an axle brake control device; annex C shows the processing of the results.

Trailed agricultural vehicles; Brakes and braking devices; Laboratory test method

ISO 5697:1982 农林车辆 制动性能的测定

Specifies method of measuring the performance of service braken, based on measured deceleration and on measured stopping distance, and of parking brakes of vehicles. Applies to: tractors and self-propelled vehicles having a maximum design speed exceeding 6 km/h; trailed vehicles designated for use at speeds exceeding 6 km/h, comprising trailers, towed machines and implements. Annex A gives a specimen test report for tractors and self-propelled vehicles; annex gives a specimen test report for trailed vehicles.

Agricultural and forestry vehicles; Determination of braking performance

ISO 1728:1980 道路车辆 机动车和挂车之间的气压制动连接装置 互换性

Specifies the requirements with concern to vehicle combinations equipped with pneumatic braking systems with two circuits: one control circuit and one pneumatic power circuit. Some figures illustrate shapes and reference quantities of concern. This second edition cancels and replaces the first edition (1975).

Road vehicles; Pneumatic braking connections between motor vehicles and towed vehicles; Interchangeability