U15 渔船总体 标准查询与下载

GB/T 25505-2010 海洋渔业船舶系泊、航行及捕捞试验通则

本标准规定了海洋渔业船舶系泊、航行及捕捞试验的一般要求、试验条件、试验项目及方法。 本标准适用于新建造的船长不小于24m的柴油机动力渔船，其他船舶可参照执行。

General provisions for programming mooring,sea trials and fishing of sea going fishery vessel

GB 11781-1989 渔业船舶基本术语

Fundamental terms of fisheries vessel

SC/T 8154-2018 玻璃纤维增强塑料渔船真空导入成型工艺技术要求

Technical requirements for vacuum introduction molding process of glass fiber reinforced plastic fishing boats

SC/T 8161-2018 渔业船舶铝合金上层建筑施工技术要求

Technical requirements for construction of aluminum alloy superstructures for fishing vessels

SC/T 8144-2018 渔船鱼舱玻璃纤维增强塑料内胆制作技术要求

Technical requirements for the production of fiberglass reinforced plastic liner in fish cabins of fishing boats

SC/T 8155-2018 玻璃纤维增强塑料渔船船体脱模技术要求

Technical requirements for demoulding of glass fiber reinforced plastic fishing boat hulls

SC/T 8156-2018 玻璃钢渔船水密舱壁制作技术要求

Technical requirements for manufacturing watertight bulkheads of fiberglass fishing boats

SC/T 8141-2017 木质渔船捻缝技术要求及检验方法

Technical requirements and inspection methods for wooden fishing boat caulking

DB31/T 1006-2016 桁杆拖网渔船技术要求

本标准规定了桁杆拖网渔船的术语和定义、主要技术参数、通讯导航配备、船员配备、环保、适居和档案管理等技术要求。 本标准适用于总长为36米的新建钢质桁杆拖网渔船。

Technical requirements for girder trawler

SC/T 8129-2009 渔业船舶鱼舱钢质内胆制作技术要求

本标准规定了渔业船舶鱼舱钢质内胆的材料和制作技术要求。在制作方法上推荐内胆钢板搭接和对接的两种施工方法，使用者可选其一。 本标准适用于渔业船舶鱼舱钢质内胆的制作及检验。

The manufacture technology requirements for the steel inner layer plank of the tank for the fishery vessel

SC/T 8059-2006 渔船隔热层发泡操作规程

本标准规定了舱温为-60℃及以上渔船冷冻、冷藏舱室硬质聚氨酯隔热层发泡操作的施工资质、发泡原料、发泡设备、施工条件、发泡操作、质量要求及其检验方法、劳动保护与安全措施。 本标准适用于以喷涂或喷灌操作方法形成的渔船冷冻、冷藏舱室硬质聚氨酯隔热层的施工和验收。

Operating rule of foaming for insulating layer on fishing vessel

SC/T 8067-2001 玻璃钢渔船建造质量要求

本标准规定了玻璃钢渔船建造质量的基本要求和检验方法。 本标准适用于以玻瑞纤维及其制品为增强材料、不饱和聚困树脂为基体材料的手糊玻璃钢渔船。

Requirements of quality in the manufacture of fiberglass reinforced plastics fishing vessel

SC/T 8124-2001 木质渔船玻璃钢被覆施工质量检验

本标准规定了以玻璃钢被孤木质渔船时对原材料、施工过程及成品进行质量检验的基本要求。 本标准适用于木质渔船被祖玻璃钢的质量检验。

Quality inspection for construction of fiberglass reinforced plastics coated wooden fishing vessel

SC/T 8060-2001 钢质渔船船体结构节点

本标准规定了钢质渔船船体结构节点型式。 本标准适用于钢质渔船船体结构节点的设计和施工。

Nodes of steel fishing vessel

BS ISO 5894:1999 船舶与海上技术.用螺栓紧固盖子的人孔

This International Standard specifies requirements for watertight and oiltight manholes of the current type with bolted covers, for general shipboard use other than for pressure vessels. It specifies the dimensions for the holes in the plating and the number, size and position of the fasteners. All forms of manhole, whether of raised coaming, surface mounted or recessed cover types, shall conform to these principal particulars. The details of the manholes shall be the responsibility of the manufacturer. NOTE Users of this International Standard should note that, while observing the requirements of the standard, they should at the same time ensure compliance with such statutory requirements, rules and regulations as may be applicable to the individual ship concerned.

Ships and marine technology - Manholes with bolted covers

BS ISO 3796:2000 船舶技术.外开单扇无障碍通道

This International Standard lays down standardized dimensions of clear openings for all types of external single-leaf doors, on board ships, for which coamings are required. These dimensions shall be used as nominal sizes for these doors of ships.

Ships and marine technology. Clear openings for external single-leaf doors

SC/T 8054.3-1998 渔船制冷系统修理技术要求.管路、辅助设备和绝热设施修理

本标准规定了渔船氛利昂制冷系统的管路、辅助设备和绝热设施的修理技术要求。 本标准适用于渔船氟利昂制冷系统的修理。

Technical requirements for repairing of fishing vessel refrigeration system.Repairing of piping, auxiliary and insulating installation

SC/T 8054.1-1998 渔船制冷系统修理技术要求.试验要求

本标准规定了渔船氟利昂制冷系统修理、试验的技术要求。 本标准适用于渔船氟利昂制冷系统修理及试验。

Technical requirements for repairing of fishing vessel refrigeration system.Test requirements

SC/T 8054.2-1998 渔船制冷系统修理技术要求.10系列船用活塞式压缩机修理

本标准规定了10系列船用活塞式制冷压缩机修理及安装技术要求。 本标准适用于渔船10系列活塞式制冷压缩机修理、检验。

Technical requirements for repairing of fishing vessel refrigeration system.Repairing of 10 series marine piston refrigerating compressor

SC/T 8095-1997 渔船隔热层发泡操作规程

本标准规定了渔船舱室隔热层的形成，喷涂发泡设备及用品，用料配制要求，喷涂发泡，隔热层质量要求，检验方法，操作安全要求。 本标准适用于渔船、冷藏船藏室隔热层的施工和验收。

Operating rule of foam for insulating layer on fishing vessel